• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.823-824
• /
• 2016

In general, distribution board, panel board and motor control center can be installed over a wide area such as residence of group, building, schools, factories, ports, airports, water service and sewerage, substation and heavy industries that are used to supply converts the voltages extra high voltage into optimal voltage. There are electrical accidents due to rise of contact temperature, loose contact of bus bar, deterioration of the contact resistance, overtemperatue of the bus bars. In this paper, we propose bus bar joints monitoring system with loose connection of bus bar, measuring the joint resistance of busbars and monitoring internal and external heat. The proposed system can be reduced the electrical accidents by maintenance of busbar joints and the temperature of the conductive contact surface of busbars.

• Journal of the Korean Society of Safety
• /
• v.36 no.2
• /
• pp.10-17
• /
• 2021

This paper presents the robust design of each component used in the development of an induction bolt heating system for dismantling the high-temperature high-pressure casing heating bolts of turbines in power plants. The induction bolt heating system comprises seven assemblies, namely AC breaker, AC filter, inverter, transformer, work coil, cable, and CT/PT. For each of these assemblies, the various failure modes are identified by the failure mode and effects analysis (FMEA) method, and the causes and effects of these failure modes are presented. In addition, the risk priority numbers are deduced for the individual parts. To ensure robust design, the insulated-gate bipolar transistor (IGBT), switched-mode power supply (SMPS), C/T (adjusting current), capacitor, and coupling are selected. The IGBT is changed to a field-effect transistor (FET) to enhance the voltage applied to the induction heating system, and a dual-safety device is added to the SMPS. For C/T (adjusting current), the turns ratio is adjusted to ensure an appropriate amount of induced current. The capacitor is replaced by a product with heat resistance and durability; further, coupling with a water-resistant structure is improved such that the connecting parts are not easily destroyed. The ground connection is chosen for management priority.

• Journal of Korean Society of Rural Planning
• /
• v.30 no.3
• /
• pp.9-17
• /
• 2024

Agricultural reservoirs play a crucial role in rural areas, providing essential water resources for agriculture. However, collapses or overfilling of reservoirs can lead to significant damages to both property and lives. Unfortunately, the safety of agricultural reservoirs is often uncertain due to aging infrastructure and lack of comprehensive safety management systems. Additionally, the escalating severity of climate change exacerbates these risks, because of extreme weather events. This study proposes a business model for a flood damage management platform tailored to rural areas to predict downstream flooding caused by agricultural reservoirs and to integrate comprehensive reservoir safety management. It aims to predict more accurate downstream flood damage using improved methods based on previous studies. The proposed business model presents strategies for providing improved downstream flood damage prediction services, and identifies potential customers and service supply strategies for the flood damage management platform. Finally, it presents an economic analysis of the proposed business model and strategies for further revenue generation.

• Culinary science and hospitality research
• /
• v.15 no.2
• /
• pp.255-267
• /
• 2009

The purpose of this study is to evaluate the importance and performance of the educational laboratory facilities for culinary practice. The questionnaire was distributed to 100 students enrolled in the culinary arts department at Y University located in Chung-buk province, and a total of 71 usable, completed questionnaires were received for the research. Collected data was statistically analyzed using the SPSS 10.0 Windows version, and the IPA(Importance-Performance Analysis) was conducted to compare importance and satisfaction from kitchen laboratory facilities which have been a key element of culinary education. Results of this study can be summarized as follows. Firstly, it was found that performance (M=3.42) for culinary practice facilities was lower than importance(M=4.09) for culinary practice facilities. Secondly, through IPA, the importance and satisfaction of culinary laboratory elements showed some differences between the students who had have some educational experience in culinary art prior to enrollmnet and those who had not. The former students attached importance to the usefulness of facilities rather than the size of facilities. And as rapidly improved factors, they answered ventilation and water supply facilities for culinary laboratories. The application of this study in physical environment of culinary education will contribute to improve students` satisfaction with the quality of education. However, the critical point of this study is a limited sampling, so the results of this study cannot be generalized.

• International Journal of Highway Engineering
• /
• v.11 no.3
• /
• pp.41-49
• /
• 2009

Cement concrete pavement has become more common in Korean highway systems. However, as its service period increases, there are some technical problems occurs and no clear solution is available primarily due to the lack of active researches. This research, hence, aims to develop a new mix proportion that may provide better strength and durability with extended service life. Based on a variety of literature reviews, the experimental variables were determined as unit cement content, S/a ratio and W/C ratio. From the experimental works, it is recommended to increase the unit cement content up to 375kg/$m^3$, 400kg/$m^3$ and 425kg/$m^3$. The target slump and air content were set 40mm and 5%, respectively. The maximum size of coarse aggregate was decided to be 25mm because of the easiness of supply in the field. The reduction of W/C ratio was necessarily required and decreased to 0.4 which was proven not to cause any mixing problem with the increased unit cement contents along with polycarbon-based high range water reducing agent. In addition, it was known that the S/a ratio could be reduced to 0.34. The lowered S/a might be possible because of the increased cement paste and hence increased cohesiveness and workability.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.135-135
• /
• 2015

Tubes are of extreme importance in industries as for fluid channels or wave guides. Furthermore, some weapon systems such as cannons use the tubes as gun barrels. To increase the service life of such tubes, a protective coating must be applied to the tubes' inner surface. However, the coating methods applicable to the inner surface of the tubes are very limited due to the geometrical restriction. A small-diameter cylindrical magnetron sputtering gun can be used to deposit coating layers on the inner surface of the large-bore tubes. However, for small-bore tubes with the inner diameter of one inch (~25 mm), the magnetron sputtering method can hardly be accommodated due to the space limitation for permanent magnet assembly. In this study, a new approach to coat the inner surface of small-bore tubes with the inside diameter of one inch was developed. Instead of using permanent magnets for magnetron operation, an external electro-magnet assembly was adopted around the tube to confine the plasma and to sustain the discharge. The electro-magnet was operated in pulse mode to provide the strong axial magnetic field for the magnetron operation, which was synchronized with the negative high-voltage pulse applied to the water-cooled coaxial sputtering target installed inside the tube. By moving the electro-magnet assembly along the tube's axial direction, the inner surface of the tube could be uniformly coated. The inner-surface coating system in this study used the tube itself as the vacuum chamber. The SS-304 tube's inner diameter was 22 mm and the length was ~1 m. A water-cooled Cu tube (sputtering target) of the outer diameter of 12 mm was installed inside of the SS tube (substrate) at the axial position. The 50 mm-long electro-magnet assembly was fed by a current pulse of 250 A at the frequency and pulse width of 100 Hz and 100 usec, respectively. The calculated axial magnetic field strength at the center was ~0.6 Tesla. The central Cu tube was synchronously driven by a HiPIMS power supply at the same frequency of 100 Hz as the electro-magnet and the applied pulse voltage was -1200 V with a pulse width of 500 usec. At 150 mTorr of Ar pressure, the Cu deposition rate of ~10 nm/min could be obtained. In this talk, a new method to sputter coat the inner surface of small-bore tubes would be presented and discussed, which might have broad industrial and military application areas.

• Journal of Wetlands Research
• /
• v.15 no.4
• /
• pp.461-469
• /
• 2013

Even though a sewer rehabilitation BTL project has been executed throughout the nation with the input of a significant amount of budget, the overall review on effectiveness of the project is insufficient. And disputes over effectiveness of the project and of the employment of I/I indexes for evaluation of the project are continued due to reliable issues of flux data which has been measured after completion of certain projects and excessive amounts of I/I. Thus, this study has reviewed effectiveness of the project, current status and problems of the installation of fixed flow meters as well as countermeasures based on 15 projects subject to the operation performance evaluation after the completion of the project. The review on operation of the project has revealed that sewer rehabilitation BTL projects are significantly effective and highly effective on reducing a rate of infiltration water. The review on the employment of proper countermeasures for main issues revealed during the investigation on the installation and operation of fixed flow meters has shown that such countermeasures could result in securing more reliable flux data.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.25 no.2
• /
• pp.26-41
• /
• 2020

In order to culture a life for the physiological and ecological research of the meiofauna, this study aimed to identify the most ideal condition in which the meiofauna can be cultured within a laboratory by setting various environmental conditions. The sediment deposits and seawater were collected from the intertidal zone in Mallipo of the west coast. A aquarium in which the internal environment can be controlled by constantly maintaining the temperature and humidity was fabricated and the culture experiments of the collected meiofauna were conducted together with the sea water and sediment deposits collected. The experiment 1 was conducted after establishing the similar environment as the collecting location. Under the same condition as the experiment 1, the experiment 2 verified a difference between when live foods were supplied and were not. In the experiment 3, the changes in the meiofauna colony were checked according to with or without light and live foods. In the results of culturing experiments, the habitat density and the number of appeared classification groups of the meiofauna colony were relatively higher both in the water tank with supplying the live foods and under the condition of having light in 12-hour cycle than those in the aquarium without live foods and under no light condition. In addition, the habitat density of meiofauna cultured within a laboratory exhibited relatively higher value than that under the natural state.

• Journal of the Korean Geographical Society
• /
• v.30 no.1
• /
• pp.35-56
• /
• 1995

During the last two decades, Korea has achieved remarkable economic growth. In this process the nation has become urbanized and industrialized. But we have also encountered widening regional disparity, housing shortage of larger cities, transportation congestion, environmental pollution and many other problems. Rapid increasing urbanization and continuous migration toward Seoul since the late 1960s have been one of the major concerns of government. Government has sought ways to moderate the population increase in Seoul. The regulation which include new town development near Seoul and dispersion strategies of higher education and other administration and living facilities outside of Seoul havemade a great expansion of the spatial influence of Seoul city. Seoul metropolitan reaion has evolved as the most powerful center of political and economical spaces. Generally within a metropolitan region, there exists a growing mutual interdependence economically, as well as socially between a central city and its surrounding area. Seoul metropolitan region manifests itself not only as a coherent system of urbanized regions, but also as an integral part of the daily urban system. The surrounding Gyunggi province and Seoul city become closely linked both economically and functionally, constituting true functlonai urban system. This study is primarily undertaken with the purpose of delineation of the sphere of influence of Seoul city in 1990. At the time of 1985, Seoul metropolitan region was delineated according to the result of the study which was performed by Korea Research Institute for Human Settlements. Afterward, the rapid speed of metropolitanization process with dramatic increase in mobility through the provision of wider transportation system across the Capital region have evolved, resulting in the great expansion of the spatial influence of Seoul city. So this study examines the expanded area of Seoul metropolitan regin during the period of 1985-90. In order to delineate Seoul metropolitan region, the indices of urbanization and functional linkage are selected. Variables included in the measurement of the urbanization level are agricultural structure, population characteristics, manufacturing and service industries, and cultural aspects such as newspaper circulation, the ratio of car ownership and piped water supply. Variables included in the measurement of functional linkage are commuting, shopping pattern, centralized service such as medical facilities and trade of agricultural products. The standardization method and factor analysis are employed in making the delineation of Seoul metropolitan region. According to the result of this study, 2 cities, 8 Eups and 46 Myuns are included Seoul metropolitan region in 1990. If we compare this delineated area in 1990 to that of 1985, we can find the distinctive pattern of expanded axes according to the main transportation routes such as Seoul-Suweon, Seoul-Gwangju, Seoul-Incheon. In 199O, all the Gyunggi province, except a few Myuns located at the north and northwest part of Gyunggi province, are included in Seoul metropolitan region. Furthermore, this study attempts to the analysis of regional structure of Seoul metropolitan region according to the functional characteristics of each city and Gun. Variables included in this analysis are the new residential function, manufacturing function, service function, education and infermation function, public facility function and agricultural function. Factor analysis and cluster analysis are employed in making regionalization. Seoul metropolitan reaion is subdivided into four subregions which reflect different functional specialization. The first group is the specialized region of newly formed residential function. The second group is the specialized reaion of manufacturing function. The third group is the specialized region of service function. And the fourth group has little specialized in terms of manufacturing, service, and residential function. But this region has some potentiality of development when Seoul metropolitan region grow continuously. Seoul metropolitan region accounted for 43% of national population, despite 11.8% of national land size in 1990. Although Seoul metropolitan region enjoys important agglomeration economies, it also has huge social cost in the form of transportation congestion, housing shortage, rapid increase of land value, environment pollution, and etc. Efficient metropolitan plan making is a vital element in promoting Seoul's economic development and providing high quality living environment at low cost. In the light of the result of this study, the outer ring of Seoul metropolitan region, especially northeastern part, are underdeveloped compared to overdeveloped southwestern area. It is needed to develop the guidelines for the implement of the growth control and management plan, inducing more balanced development for whole Seoul metropolitan reaion.

• Journal of Preventive Medicine and Public Health
• /
• v.11 no.1
• /
• pp.86-97
• /
• 1978

The mobile medical service has been operated for many years by a number of medical schools and hospitals as a most convenient means of medical service delivery to the people residing in such area where the geographical and socioeconomic conditions are not good enough to enjoy modern medical care. Despite of official appraisal showing off simply with numbers of outpatients treated and medical persons participated, however, as well recognized, the capability (in respect of budget, equipment and time) of those mobile medical teams is so limitted that it often discourages the recipients as well as medical participants themselves. In the midst of rising need to secure medical service of good quality to all parts of the country, and of developing concept of primary health care system, authors evaluated the effectiveness of and problems associated with mobile medical servies program through the community diagnosis of a village (Opo-myun, Kwangju-gun) to obtain the information which may be halpful for future improvement. 1. Owing to the nationwide Sae-Maul movement powerfully practiced during last several years, living environment of farm villages generally and remarkably improved including houses, water supply and wastes disposal etc. Neverthless, due to limitations in budget time and lack of knowledge (probably the most important), these improvements tend to keep up appearances only and are far from the goal which may being practical benefit in promoting the health of the community. 2. As a result of intensive population policy led by the government since 1962, there has been considerable advances in understanding and the rate of practicing family planning through out the villages and yet, one should see many things, especially education, to be done. Fifty eight per cent of mothers have not received prenatal check and the care for most (72%) delivery was offered by laymen at home. 3. Approximately seven per cent of the population was reported to have chronic illness but since only a few (practically none) of the people has had physical check up by doctors, the actual prevalence of chronic diseases may reach many times of the reported. The same fact was observed also in prevalence of tuberculosis; the patients registered at local health center totaled 31 comprising only 0.51% while the numbers in two neighboring villages (designated as demonstration area of tuberculosis control and mass examination was done recently) were 3.5 and 4.0% respectively. Prevalence rate of all dieseses and injuries expereinced during one month (July, 1977) was 15.8%. Only one tenth of those patients received treatment by physicians and one fifth was not treated at all. The situation was worse as for the chronic patients; 84% of all cases either have never been treated or discontinued therapy, and the main reasons were known to be financial difficulty and ignorance or indifference. 4. Among the patients treated by our mobile clinic, one third was chronic cases and 45% of all patients, by the opinion of doctors attended, were those who may be treated by specially trained nurses or other paramedics (objects of primary care). Besides, 20% of the cases required professional managements of level beyond the mobile team's capability and in this sense one may conclude that the effectiveness (performance) of present mobile medical team is quite limitted. According to above findings, the authors would like to suggest following for mobile medical service and overall medicare program for the people living in remote country side. 1. Establishment of primary health care system secured with effective communication and evacuation (between villages and local medical center) measures. 2. Nationwide enforcement of medical insurance system. 3. Simple outpatient care which now constitutes the main part of the most mobile medical services should largely be yielded up to primary health care unit of the village and the mobile team itself should be assigned on new and more urgent missions such as mass screening health examination of the villagers, health education with modern and effective audiovisual aids, professional training and consultant services for the primary health care organization.