• Composites Research
• /
• v.36 no.2
• /
• pp.69-79
• /
• 2023

Oil-water separation is a critical process for several industrial applications, including oil production, wastewater treatment, food processing, and environmental area such as marine oil spills. The separation efficiency of oil-water mixtures can be influenced by various factors such as mixture composition, oil and water conditions, and the separation technology used. Over the years, various technologies have been developed to separate water and oil by physical, chemical and biological methods. This paper presents an overview of the various methods and technologies available for oil-water separation, including gravity separation, centrifugal separation, and separation using adsorbents, filters. The strengths and limitations of each method are discussed, along with recent research trends and future prospects. Furthermore, this paper aims to provide direction for future research and industrial application of sustainable and environmentally friendly oil-water separation technologies. In conclusion, we provide a comprehensive overview of recent oil-water separation technologies that will be beneficial to researchers and industrialists in the field of oil-water separation.

• Journal of Korean Society on Water Environment
• /
• v.23 no.4
• /
• pp.458-466
• /
• 2007

This study is to evaluate control effects of separation wall by surveying water quality and sewer overflows during dry and wet periods in combined sewer and separated sewer systems. Ravine water from the combined Seokgyo outfall with the separation wall was separated about four times larger than sewage flow during dry periods. The water quality of the combined Seokgyo outfall with separation wall during dry periods is flow weighed average BOD 61 mg/L, the combined Cheonseokgyo outfall without the separation wall is average BOD 71 mg/L, and the separated Pyeongsong center outfall is average BOD 41 mg/L. The BOD concentration in separated outfall form about 57% of the combined outfall, and this means the separated outfall (i.e. storm sewer) is polluted by inflow of sewage. The overflow load of the separated outfall is ten times higher than the combined outfall and its overflow load per rainfall is three times than combined outfall during the wet periods. Therefore, the control plan of overflow load is required in storm sewer. The control effects of the overflow load increased 79% by setting the separation wall in the combined sewer, and showed 27% increase without the separation wall in separated sewer, but forecasted over 80% increase of effects if the separation wall was set.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.6
• /
• pp.1-6
• /
• 2007

A study on the new active circulation type oil-water separation system including buoyancy type guidance system was carried out in this paper. Newly developed oil-water separation system is composed of several oil separation steps. In the beginning of these steps, buoy type separation system would be used. Buoy type oil guiding system was developed based on the difference of density of water and oil.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.2
• /
• pp.21-25
• /
• 2010

In response to the industrial needs for automated handling of very thin solar cell wafers, this paper presents the design concept for the individual wafer separation from the stacked wafers by utilizing continuous water jet. The experimental apparatus for automated wafer separation was constructed and it includes the water jet system and the microprocessor controlled wafer stack advancing system. Through a series of tests, the performance of the proposed design is quantified into the success rate of single wafer separation and the rapidity of processing wafer stack. Also, the inclination angle of wafer equipped cartridge and the water jet flowrate are found to be important parameters to be considered for process optimization. The proposed design shows the concept for fast and efficient processing of wafer separation and can be implemented in the automated manufacturing of silicon based solar cell wafers.

• Journal of Conservation Science
• /
• v.25 no.2
• /
• pp.171-178
• /
• 2009

When we considered the superior ability of the semi-water soluble urethane 1st transcription and final epoxy products, the stability for moving historic sites depend on physical properties and the peel off state of separation media. In this paper, we synthesised three type of water-borne epoxy solution without using a surfactant, and investigated the peel off state, physical properties, and the state between urethane surface and epoxy surface after exfoliation. The life time of water-borne separation media is over the 60 days. When it is used the 30% solution of water-borne separation media, it made good separation of urethane pre-products surface and epoxy final product surface and no color change. The separation tension pressure is about 15~50 kg/$cm^2$ and there is no surface whitewash phenomenon. We suggest that this water-borne epoxy will be best material as separation media of low viscosity type.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.6
• /
• pp.712-720
• /
• 2016

When bioethanol and water are mixed at a proper ratio, phase separation can occur because of the immiscibility of biobutanol with water. Phase separation in bioethanol blends fuels is a major problem for gasoline vehicle users due to effect of octane number and component corrosion. Thus, in this study, the phase separation of bioethanol was examined effect of bioethanol blends (E3 (3 vo.% bioethanol in gasoline), E5 and E10) in presence of water. The effect were evaluated behavior with phase separation test, simulation test of fuel tank in gas station according to water addition volume and it was investigated change of water content, bioethanol content and octane number for gasoline phase in bioethanol blends (E3, E5 and E10) every 1 week after water addition. The E3 occurred phase separation more easily than the E5 and E10 in small water contents because solubility of water on ethanol content difference in gasoline-ethanol. It was kept a initial level of water content, bioethanol content, and octane number by repeated sample replacing in simulation test of fuel tank.

• Journal of the Korean Applied Science and Technology
• /
• v.24 no.1
• /
• pp.86-91
• /
• 2007

Gasohol, which is combined solution of gasoline and ethanol, is difficult to apply to the field, because it usually brings phase separation by mingling of water. We investigated phase separation by adding different concentrations of "Ethanol", anhydrous and fermentative, to "Gasolines", gasoline, gasoline base and naphtha, Placing ethanol itself open to the air, the concentrations of water are increased in length of time. The phase separation temperatures of the gasolines-ethanol solutions have dropped in the following order : gasoline, gasoline base and naphtha. When adding water to the solutions of gasolines and anhydrous ethanol, the temperatures of phase separation is higher when the concentration of water increases more. Thus, it is obvious that the water is sensitive in phase separation.

• Korean Chemical Engineering Research
• /
• v.49 no.6
• /
• pp.823-828
• /
• 2011

Characteristics of water separation in a FWKO(Free Water Knok Out) vessel was investigated to remove water from oil-water mixture. Decane, toluene, and asphalt were used as model oils. Preliminary experiments were carried out for decane in a prototype FWKO vessel. Based on the results of preliminary experiments, the prototype vessel was modified and its performance was evaluated by using toluene. The effects of experimental variables on the separation of oil-water mixture were evaluated in terms of separation efficiency. The experimental variables include water cut(water ratio), number of baffles, residence times, and operation temperatures. The optimum conditions of water separation were found to be 0.8 water cut, 3 baffles, 1,200 sec, and $45^{\circ}C$.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.10a
• /
• pp.185-189
• /
• 2001

A study on the new active circulation type oil-water separation system including buoyancy type guidance system was carried out in this paper. Oil-water separation system is composed of several oil separation steps. Buoy type oil guiding system was developed based on the difference of buoyance of water and oil. The design speed of this vessel is 25 knots.

• Journal of Sensor Science and Technology
• /
• v.25 no.3
• /
• pp.213-217
• /
• 2016

The superhydrophobic and superoleophobic meshes surfaces have been used in various applications such as self-cleaning, anti-icing, gas exchange, oil-water separation, sound-wave penetrable anti-wetting structures, etc. In particular, there are many studies for oil-water separation with environmental issues. Because of high pressure and dynamic environment, oil-water separation filters must have stable surface properties as super-hydrophobicity and superoleophobicity. The oleophobicity of surface depends on the surface chemistry and roughness of the surface. The roughness of oleophobic surface enhances its static contact angle and stability. The multi-scale hierarchical structure provides a stable superhydrophobic state by maintaining a Cassie state. In this research, we fabricated a superoleophobic mesh with a multi-scale hierarchical structure to increase the pressure resistance and adjusted a size of the mesh hole.