• The Journal of Industrial Distribution & Business
• /
• v.9 no.2
• /
• pp.39-45
• /
• 2018

Purpose - The purpose of this study is to examine the image similarity and attribute recognition of the top 10 rated spa destinations (Chungnam Deoksan, Chungnam Dogo, Busan Dongrae, Daejeon Yuseong, Chungnam Asan, Gyeongbuk Bomun, Chungbuk Suanbo, Gyeongnam Jangyu, Chungnam Onyang, & Gyeongbol Bugok) in Korea based on the visits to these spa places by the customers. Research design, data, and methodology - The survey of this study was conducted on the visitors to the top 10 spa destinations in Korea from April 8 ~ April 21, 2017, and a total of 300 questionnaires were distributed. Of them, effective questionnaires used in the final study were a total of 241. In this study, empirical analysis was made through frequency analysis, factor analysis, and multidimensional scaling ALSCAL(spinning symmetry for image similarity and rectangle for attributes recognition) by using the Statistics Package SPSS 24.0. Results - According to the analysis result of spa destination image similarity, the stress level was 0.16453 and the level of the stress was good. Moreover, the coefficient of determination (RSQ) was, which had a description of each aspect of the spa destination, 0.79908. According to the results of attribute recognition, the stress value of 0.11805 represents a degree of conformity, and the coefficient of determination(RSQ) appeared at 0.98665. Therefore, the results of this analysis are that the similarities between spa destinations and the attribute recognition of the spa destinations is a suitable model that is properly expressed in two dimensions. Conclusions - First, according to the analysis result of image similarity, Deoksan & Dogo spa revealed similar images, as well as the Dongrae and Yuseong spa, while on the contrary Asan, Bomun, Suanbo spa has different images from the rest. Second, according to the results of attribute recognition, Asan and Onyang spa has competitiveness in terms of accessibility to spa destination; Yuseong, Dongrae, Jangyu spa in terms of spa facilities, spa tourism conditions, and service & shopping conditions. while spa water quality and spa costs showed low attribute reflection for all 10 spas. Therefore, the spa visitors cannot recognize the differentiation of spa water quality and spa costs.

• Journal of the Korean Society of Groundwater Environment
• /
• v.5 no.4
• /
• pp.215-222
• /
• 1998

The objective of this study was to investigate the effects of physico-chemical environmental factors on the changes of bacterial population from two sites used for drinking water and eight sites polluted with various pollutant in Seoul city. In all the stations except for two sites used for drinking water, the concentrations of nitrate- nitrogen and ammonia were in excess of the criteria of groundwater quality by the result of analysis of 40 variations including physicochemical environmental factors, heavy metals, and bacterial populations. The numbers of total bacteria, heterotrophic bacteria and functional groups of bacteria were ranged from 5.1 to 41.4${\times}$10$\^$5/cells/ml and from 0.01 to 29.6${\times}$10$^4$cfu/ml, respectively. The activities of extracellular enzymes showed the ranges of 0.005∼11.3${\mu}$M/l/hr and its order to lipase, phophatase, ${\beta}$-glucosidase, cellulase, chitinase, amylase. The results of correspondence and multidimensional scaling analysis between bacterial populations and its physico-chemical environmental factors were explained the effects of physico-chemical environmental factors according to site characters and separated four group, which is accord with potential pollutants at wells.

• Wind and Structures
• /
• v.38 no.4
• /
• pp.261-275
• /
• 2024

Before performing an experimental study on the downburst-generated wave, it is necessary to examine the scale effects and corresponding corrections or compensations. Analysis of similarity is conducted to conclude the non-dimensional force ratios that account for the dynamic similarity in the interaction of downburst with wave between the prototype and the scale model, along with the corresponding scale factors. The fractional volume of fluid (VOF) method in association with the impinging jet model is employed to explore the characteristics of the downburst-generated wave numerically, and the validity of the proposed scaling method is verified. The study shows that the location of the maximum radial wind velocity in a downburst-wave field is a little higher than that identified in a downburst over the land, which might be attributed to the presence of the wave which changes the roughness of the underlying surface of the downburst. The impinging airflow would generate a concavity in the free surface of the water around the stagnation point of the downburst, with a diameter of about two times the jet diameter (D_jet). The maximum wave height appears at the location of 1.5D_jet from the stagnation point. Reynolds number has an insignificant influence on the scale effects, in accordance with the numerical investigation of the 30 scale models with the Reynolds number varying from 3.85 × 10⁴ to 7.30 × 10⁹. The ratio of the inertial force of air to the gravitational force of water, which is denoted by G, is found to be the most significant factor that would affect the interaction of downburst with wave. For the correction or compensation of the scale effects, fitting curves for the measures of the downburst-wave field (e.g., wind profile, significant wave height), along with the corresponding equations, are presented as a function of the parameter G.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.10
• /
• pp.1217-1224
• /
• 2014

This paper provides a practical scaling method to solve an old problem for scaling and developing the speed and resistance of a model to full-scale submarine in fully submerged underwater test. In every experimental test in towing tank, water tunnel and wind tunnel, in the first step, the speed of a model should be scaled to the full-scale vessel (ship or submarine). In the second step, the obtained resistance of the model should be developed. For submarine, there are two modes of movement: surface and submerged mode. There is no matter in surface mode because, according to Froude's law, the ratio of speed of the model to the full-scale vessel is proportional to the square root of lengths (length of the model on the length of the vessel). This leads to a reasonable speed and is not so much for the model that is applicable in the laboratory. The main problem is in submerged mode (fully submerged) that there isn't surface wave effect and therefore, Froude's law couldn't be used. Reynold's similarity is actually impossible to implement because it leads to very high speeds of the model that is impossible in a laboratory and inside the water. According to Reynold's similarity, the ratio of speed of the model to the full-scale vessel is proportional to the ratio of the full-scale length to the model length that leads to a too high speed. This paper proves that there is no need for exact Reynold's similarity because after a special Reynolds, resistance coefficient remains constant. Therefore, there is not compulsion for high speeds of the model. For proving this finding, three groups of results are presented: two cases are based on CFD method, and one case is based on the model test in towing tank. All these three results are presented for three different shapes that can show; this finding is independent of the shapes and geometries. For CFD method, Flow Vision software has been used.

• Journal of Korean Society of Water and Wastewater
• /
• v.12 no.3
• /
• pp.65-74
• /
• 1998

Life cycle assessment (LCA) on two different sludge treatment systems, on-site treatment and pipe-collected intensive treatment was performed to estimate the environmental impact in the aspect of global warming effect. As a main parameter of the estimation, $CO_2$ was chosen and quantified through the whole life cycle of the treatment systems including construction, operation and dismantlement. In this study, the changes of $CO_2$ production unit (CPU) by up-scaling n currently used sludge treatment processes were also calculated. As the result, a larger amount of $CO_2$ was exhausted from the construction step of intensive treatment system than that of on-site treatment system, because an additional pipe-collection system was needed in intensive treatment system. However, the total amount of $CO_2$ exhausted from whole life cycle including not only construction and dismantlement but also 15 year-operation and maintenance was reduced by appling intensive treatment.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.60-64
• /
• 2005

강우-유출 모형을 수행하기 위해서는 지표면의 성질을 나타내는 보조 자료로서 식생피복자료, 토양분포, DEM 등이 주어지는데, 이러한 인자들이 흐름을 지배하게 되므로 중요하다. 그러므로 강우-유출 모형에서는 지표에서의 식생을 적절하게 나타내 줄 필요가 있는데, 최근의 원격 탐사 기술이 하나의 대안으로 제시되어 왔으며 식생 정보는 2차원 디지털 지도로 작성되어 수치모형에서는 이 디지털지도로부터 조도계수의 값을 전환하는 다단계 방법을 이용하여 오고 있다. 그러나 강우-유출 모형의 격자 간격이 식생 피복을 나타내기 위한 디지털 지도의 격자 간격과 항상 일치하는 것이 아니고 디지털 지도의 격자 간격이 일반적으로 더 세밀하므로 강우-유출 모형에서 디지털 지도를 이용하기 위해서는 적당한 방법의 스케일 확장 (up-scaling)이 필요하며, 이 연구에서는 질량 보존의 법칙을 사용하여 이론적 기반에 근거한 하나의 전략적인 방법이 제시된다. 이 연구의 목적은 강우-유출 모형의 수행 시 이질성을 보이는 지표면에서 식생과 관련된 매개변수를 통합/확장 처리하는 하나의 기법을 대기모형에서 이미 제시된 방법을 모사하여 제시함으로써 이질성을 보이는 지표면의 처리할 때 방향을 설정해 주고자함이다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.115-119
• /
• 2008

강우빈도해석기법 중 지점빈도해석은 대상지점의 확률강우량을 추정하기 위한 방법으로, 이를 위해서는 특정 지속시간에 대해 구축된 강우자료가 필요하나 현실적으로 대상지점의 특정 지속시간에 대한 자료가 구축되어 있지 않거나, 휴전선 부근의 지역과 북한지역은 강우자료를 구축하기 어려우므로 인근 지점의 자료를 이용하여 빈도해석을 실시하기도 한다. 따라서 본 연구에서는 강우자료간의 스케일 성질을 이용하여 특정 지속시간에 대한 연최대강우자료 추정의 정확성을 판단해 보았고, 강우의 스케일 성질을 이용하여 북한지역의 평강, 원산, 장전에서 특정 지속시간에 대한 연최대강우량을 추정하기 위해 세계기상통신시스템(GTS: Global Telecommunication System)을 통하여 자료를 수집한 북한지역 3개 지점에 대해 강우의 스케일 성질을 적용해 보았다.

• Journal of the Korea Concrete Institute
• /
• v.12 no.4
• /
• pp.41-48
• /
• 2000

This study is to investigate for the frost resistance of high-strength concrete using finely ground granulated blast-furnace slag with experimental parameters, such as water/binder ratio, replacement proportion of granulated blast-furnace slag, air content and methods of curing. The high-strength concrete using granulated blast-furnace slag is effective to resist frost and decrease scaling. The more increasable replacement proportion of granulated blast-furnace slag is, the better the effect is. The high-strength concrete using granulated blast-furnace slag needs hydrating adequately to prevent deterioration by drying in the early curing period. The micro structure of high-strength concrete, increased to the pore number with diameter of 0.03~0.1mm, is changed by using granulated blast-furnace slag, but is presented differently according to water/binder ration and replacement proportion of granulated blast-furnace slag.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.705-708
• /
• 2004

The spatial variability of the L- and C- band large scale remotely sensed soil moisture data, obtained during tire Southern Great Plain 1999 (SGP'99), was characterized. The results demonstrate that soil moisture data using L-band show the break in statistical symmetry (multiscaling behavior) with the variation of scale of observation, which is similar to that of the soil property such as sand content. Also, soil moisture data using C-band show single scaling behavior with the variation of scale of observation, which Is similar to that of the vegetation condition.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.306-306
• /
• 2018

일반적으로 경향성 분석은 연최대강우량으로부터 산정하고 있으나 본 연구에서는 강우자료 이외의 자료를 이용하여 경향성 분석을 하고자 한다. 이를 위해 국내에서 가장 신뢰할 수 있는 기상청 산하의 강우량으로부터 연최대강우량을 추출하고 월단위인 월별 스케일 지수를 추정하였다. 비교를 위해 경향성 분석 방법 중 가장 널리 사용되고 있는 Mann-Kendall (MK) 분석을 사용하였고, 추가적으로 MK 분석의 단점을 보완할 수 있는 the block bootstrap-based MK (BBS-MK) 분석을 적용하였다. 연최대강우량을 이용한 경향성 분석 결과는 홍수기 기간에 해당하는 7월부터 10월까지의 경향성은 뚜렷하게 나타나지 않았다. 그러나 스케일 지수에 대한 경향성 분석 결과에서는 몇몇 지점에서 감소 또는 증가하는 경향을 보이는 강우 지점들을 확인할 수 있었다. 따라서 경향성 분석을 위해서는 연최대강우량뿐만이 아니라 다양한 인자를 이용한 경향성 분석이 필요함을 확인하였다.