• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.11
• /
• pp.772-779
• /
• 2012

For improving performance of conical air diffuser generating fine bubble, both experimental and numerical simulation method were used. After adapting diffusers inner real scale bubble column, suitable for various diffuser submergence, the effect of diffuser submergence on oxygen transfer performance such as Oxygen Transfer Coefficient ($K_{L}a_{20}$) and Standard Oxygen Transfer Efficiency (SOTE) was investigated empirically. As flow patterns for various diffuser number and submergence were revealed throughout hydrodynamic simulation for 2-phase fluid flow of air-water, the cause of the change for oxygen transfer performance was cleared up. As results of experimental performance, $K_{L}a_{20}$ was increased slightly by 7% and SOTE was increased drastically by 39~72%, 5.6% per meter. As results of numerical analysis, air volume fraction, air and water velocity in bioreactor were increased with analogous flow tendency by increasing diffuser number. As diffuser submergence increased, air volume fraction, air and water velocity were decreased slightly. Because circulative co-flow is determinant factor for bubble diffusion and rising velocity, excessive circulation intensity can result to worsen oxygen transfer by shortening bubble retention time and amount.

• Journal of Korean Society on Water Environment
• /
• v.33 no.6
• /
• pp.715-721
• /
• 2017

Tree box filters, an example of bioretention systems, were compacted and versatile urban stormwater low impact development technique which allowed volume and water quality treatment performance to be adjusted based on the hydrologic, runoff quality and catchment characteristics. In this study, the overall performance of a 6 year-old tree box filter receiving parking lot stormwater runoff was evaluated. Hydrologic and hydraulic factors affecting the treatment performance of the tree box filter were also identified and investigated. Based on the results, the increase in rainfall depth caused a decrease in hydrologic and hydraulic performance of the tree box filter including volume, average flow, and peak flow reduction (r = -0.53 to -0.59; p<0.01). TSS, organics, nutrients, and total and soluble heavy metals constituents were significantly reduced by the system through media filtration, adsorption, infiltration, and evapotranspiration mechanisms employed in the tree box filter (p<0.001). This significant pollutant reduction by the tree box filter was also found to have been caused by hydrologic and hydraulic factors including volume, average flow, peak flow, hydraulic retention time (HRT) and runoff duration. These findings were especially useful in applying similarly designed tree box filter by considering tree box filter surface area to catchment area of less than 1 %.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.5
• /
• pp.616-621
• /
• 2017

The objective of this study was to investigate the physicochemical properties of domestic strong wheat flour (DSWF). Three commercial DSWFs (D1, D2, and D3) were compared with imported strong wheat flour (ISWF). DSWFs had higher moisture content, crude protein content, lightness, and whiteness than ISWF. DSWFs showed lower solvent retention capacity and water absorption index than ISWF. DSWFs also showed significantly higher water solubility index than ISWF (P<0.05). Setback values by rapid visco analysis were significantly higher in D1 and D2 than in ISWF and D3, which means ISWF and D3 were better in retarding retrogradation. Differential scanning calorimetry results showed that ISWF required 6.2 J/g of energy for phase transition, whereas DSWFs needed 6.67~7.13 J/g. The farinograph results showed that ISWF had higher water absorption, longer dough stability time, and significantly higher softening of dough at 20 min than DSWF (P<0.05). Dough resistance and extensibility were higher in ISWF than in DSWFs.

• Clean Technology
• /
• v.28 no.1
• /
• pp.79-93
• /
• 2022

In this study, an electronics industrial wastewater activated sludge model (e-ASM) to be used as a Water Digital Twin was calibrated based on real high-tech electronics industrial wastewater treatment measurements from lab-scale and pilot-scale reactors, and examined for its treatment performance, effluent quality prediction, and optimal process selection. For specialized modeling of a high-tech electronics industrial wastewater treatment system, the kinetic parameters of the e-ASM were identified by a sensitivity analysis and calibrated by the multiple response surface method (MRS). The calibrated e-ASM showed a high compatibility of more than 90% with the experimental data from the lab-scale and pilot-scale processes. Four electronics industrial wastewater treatment processes-MLE, A2/O, 4-stage MLE-MBR, and Bardenpo-MBR-were implemented with the proposed Water Digital Twin to compare their removal efficiencies according to various electronics industrial wastewater characteristics. Bardenpo-MBR stably removed more than 90% of the chemical oxygen demand (COD) and showed the highest nitrogen removal efficiency. Furthermore, a high concentration of 1,800 mg L^-1 T MAH influent could be 98% removed when the HRT of the Bardenpho-MBR process was more than 3 days. Hence, it is expected that the e-ASM in this study can be used as a Water Digital Twin platform with high compatibility in a variety of situations, including plant optimization, Water AI, and the selection of best available technology (BAT) for a sustainable high-tech electronics industry.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.296-296
• /
• 2022

This study was investigated to compare the milling and physicochemical characteristics of six Korean wheat cultivars (Keumkang, KK; Jokyung, JK; Goso, GS; Joongmo2008, JM; Baekkang, BK; Saekeumkang, SKK) and five foreign wheat classes (Australian standard white wheat, ASW; Australian hard, AH; US northern spring, NS; US hard red winter, HRW; Soft wheat, SW). Korea and foreign wheat grains were milled using a Buhler MLU-202. Flour moisture, ash, protein, gluten, sedimentation, particle size, solvent retention capacity (SRC) and dough properties of flour were analyzed. Results showed that the hard wheats had a greater total flour yield and reduction fraction yield than the soft wheats regardless of the country. However, there were in the milling characteristics between the US and Korean soft wheats. GS, a soft wheat in Korea, had the lowest flour yield (59.6%) and the highest bran fraction yield (21.4%). The particle sizes of flour by milling fraction were B1>B2>B3 for the largest, and the R1〈R2〈R3 for the smallest. Particle size, ash, protein contents and the values of lactic acid SRC showed highly correlated with flour yield. The gluten-performance-index (GPI) is the ratio of the lactic acid SRC value to the sum of sodium carbonate and sucrose SRC values, and it has been used as a quality indicator for overall performance potential of flour. GPI values differed depending on the wheat variety or class, JM (0.82) was the highest value, and SKK (0.56) and SW (0.59) were low. The curve pattern of the Mixolab result also gives a quality indication of the flour sample. JM and NS flour had similar pattern at water absorption and gluten strength parameters and BK and HRW had similar viscosity patterns. These results will enable further study for blending Korean wheat cultivar to improve the flour quality.

• Korean Journal of Environment and Ecology
• /
• v.38 no.2
• /
• pp.204-216
• /
• 2024

Understanding the trade-off effect in ecosystem services and measuring the interrelationships between services are crucial for managing limited environmental resources. Accordingly, in this study, we identified the dominant trends and increases and decreases in ecosystem services derived from changes in land cover over about 30 years and tracked changes in the relationships between ecosystem services that occurred over time. Through it, we determined the relationship between land cover changes and ecosystem service changes, as well as the distinct characteristics of service changes in different areas. The research primarily utilized the InVEST model, an ecosystem service assessment model. After standardizing the evaluation results between 0 and 1, it went through principal component analysis, a dimensionality reduction technique, to observe the time-series changes and understand the relationships between the services. According to the research results, the area of urbanized regions dramatically increased between 1989 and 2019, while forests showed a significant increase between 2009 and 2019. Between 1989 and 2019, the national ecosystem service supply witnessed a 13.9% decrease in water supply, a 10.5% decrease in nitrogen retention, a 2.6% increase in phosphorus retention, a 0.9% decrease in carbon storage, a 1.2% increase in air purification, and a 3.4% decrease in habitat quality. Over the past 30 years, South Korea experienced an increase in urbanized areas, a decrease in agricultural land, and an increase in forests, resulting in a trade-off effect between phosphorus retention and habitat quality. This study concluded that South Korea's environment management policies contribute to improving ecosystem quality, which has declined due to urbanization, and maximizing ecosystem services. These findings can help policymakers establish and implement forestry policies focusing on sustainable environmental conservation and ecosystem service provision.

• Journal of Life Science
• /
• v.27 no.2
• /
• pp.123-130
• /
• 2017

This study was conducted to investigate the physicochemical quality characteristics of pork patty added with four different amount (T0:0%, T1:0.3%, T2:0.7%, T3:1.0%) of tangerine (Citrus unshiu) peel. There was no significant difference in chemical composition, cooking yield, water holding capacity, moisture retention, fat retention, hardness, springiness, cohesiveness, gumminess, chewiness, VBN content, L-value. In taste, texture, juiciness and palatability, the addition of 0.3%~1.0% tangerine peel in pork patty showed no significant difference on sensory properties compared to the pork patty without tangerine peel. Total polyphenol content was highest in T3, and DPPH radical scavenging activity was highest in T2 and T3 (p<0.001). The TBARS contents decreased as tangerine peel become added (p<0.001). The pH was highest in T0, and was lowest in T3 (p<0.001). The external a-value of T2 and T3 were significantly higher than that of T0 (p<0.01). The external and internal b-value of T2 and T3 were higher than those of T0 (p<0.01). Flavor of T2 and T3 were higher than those of T0 and T1 (p<0.01). In conclusion, the results of this study indicate that an addition of tangerine peel could be utilized as an ingredient in pork patty in promotion of function of tangerine by-products.

• Applied Chemistry for Engineering
• /
• v.10 no.5
• /
• pp.718-725
• /
• 1999

In order to investigate the interaction characteristics of poly(dimethylsiloxane) (PDMS) with various solvents such as water, ethanol, and iso-propanol, Inverse Gas Chromatography(IGC) at finite concentration, which is a very fast, accurate, and thus promising technique in thermodynamic study of polymer systems, is employed. By measuring the specific retention volumes of the probes, the interaction parameters are calculated by means of the Flory-Huggins equation. From the results, the interaction parameters of the probes are, as expected due to the hydrophobicity of the polymer, found to be of large positive values (2$2.0{\times}10^{-3}mol/g$. For the linear PDMS, interpretation of the space distribution of molecules is performed by the Kirkwood-Buff-Zimm(KBZ) integrals, which give intuitive information about physical properties. From the KBZ integrals, water does not show the tendency of preferential solvation with the PDMS but formed self-cluster. The larger solvent molecules show a stronger tendency to distribute more randomly in the mixture.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.6
• /
• pp.1074-1079
• /
• 1996

Physicochemical characteristics of pigment separated from cockle shell were studied. Pigment on the cockle shell was peeled with distilled water, and soaked in 4% TCA solution for 30 minutes and filtered. Filtrate was washed 3 times with distilled water and Iyophilized. Dried pigment was dissolved with 2N NaOH solution and preparative TLC with 2N NaOH : acetone(1 : 1). UV/vis spectrum of pigment separated from cockle shell and melanin as standard was same one peak at UV area and λ$_{max}$was 226nm. Dissolved property of pigment was same as that of melanin. Pigment was not ommochrome but like melanin, because it was insoluble in formic acid, whitening in $H_2O_2, $ and pattern of UV-spectrum was same as melanin. Pigment separated from cockle shell was stable at high temperatures. In thermal treatment at $70^{\circ}C, $ $80^{\circ}C, $ $90^{\circ}C$ and $100^{\circ}C$ for 8 hours, retention ratio of pigment separated from cockle shell were 95.0%, 93.3%, 90.8% and 87.6%, respectively.

• Journal of Korean Society on Water Environment
• /
• v.23 no.1
• /
• pp.138-143
• /
• 2007

This study goes in for the observation of the characteristics of nitrogen removal from swine wastewater by struvite crystallization. In addition, the struvite formation potential in supernatants after struvite crystallization was investigated. In the study for nitrogen removal by struvite crystallization, the effects of pH and molar ratio of magnesium (Mg) injected using bittern as Mg source were investigated. Also, the potential of struvite formation in the supernatant with amount of Mg added was carefully observed. As the results, the optimum pH in the removal of nitrogen was 8.8 and sludge volume was increased as pH was raised from 7 to 12 under the condition that the molar ratio of $Mg^{2+}$ to ${NH_4}^+$-N to ${PO_4}^{3-}$-P was 1:1:1. An optimum removal efficiency of ammonia-N was observed at 1 molar ratio of Mg to ${NH_4}^+$-N, showing no further increase at over 1 molar ratio and dramatical deterioration at under 1 molar ratio. However, the sludge volume was increased by increasing the molar ratio of Mg. In the experiments for the potential of struvite formation in the supernatants, initial -log([$Mg^{2+}$][${NH_4}^+$][${PO_4}^{3-}$]) value was much lower than $pK_{sp}$ and gradually reached $pK_{sp}$ at 2 days, as the molar ratio of Mg increased over 1.2. At 31 days, -log([$Mg^{2+}$][${NH_4}^+$][${PO_4}^{3-}$]) value was returned to the initial value. In addition, the supernatants had a potential precipitation of hydroxylapatite due to calcium contained in bittern, $K_2Mg(SO_4)_3$ and $K_3Na(SO_4)_2$ resulting from the decrease of sodium and potassium in supernatants formed after struvite crystallization as times go by. Based on the results, it appears that some retention time and proper dosage of Mg may be needed for the prevention of scale in pipe line.