• Spatial Information Research
• /
• 제9권2호
• /
• pp.291-307
• /
• 2001

오늘날 환경공학분야에서는 지표상의 유체와 오염물질 흐름에 대한 화학적·생물학적 프로세스를 보다 정확하고 효과적으로 파악하기 위하여 GIS 기법을 적용하는 연구가 활발히 진행되고 있다. 그러나, 공간적으로 표현되는 지표오염부하와 호수·하천 프로세스 간의 연계는 상대적으로 미흡한 실정이다. 이러한 연속성의 부재로 인하여 공간적인 오염원 특성과 수질모델의 연계 방안이 요구되고 있다. 본 연구의 목적은 GIS 소프트웨어인 Arcview와 USEPA의 수질 모델인 WASP5를 양방향으로 연계하여 오염부하와 수질모델의 입·출력 관계를 구현하는 것이다. 연구의 범위는 연구 동향 및 사례 분석, GIS를 이용한 점오염부하 및 비점오염부하 산출, WASP5 모델링, GIS와 모델의 연계 등을 포함한다. 본 연구는 GIS를 이용한 전처리(수질모델 입력 자료 생성), WASP5 수질 모델링, GIS를 이용한 후처리(수질 모델링 결과 출력)의 절차로 수행되었다. 전처리 단계에서는 소유역별 오염부하량을 산정한 후, 격자 분석 등을 통하여 모델링의 기본 단위가되는 세그먼트를 분할하고 각 세그먼트로 유입되는 경계농도를 산출하였다. 그리고 WASP5 수질 모델링 단계에서는 실측치를 이용하여 모델을 보정하고 모델링 결과를 분석하였다. 마지막으로 후처리 단계에서는 모델 결과를 GIS 형태의 자료로 변환하고, 이를 그래프나 주제도 형태로 표현하였다. 본 연구에서 구현된 인터페이스는 수질 관리를 위한 기본적인 환경을 제공하기 때문에 수질 정책 수립이나 의사 결정에 효과적으로 사용될 수 있을 것으로 기대된다.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2005년도 국제학술대회
• /
• pp.381-385
• /
• 2005

Characterization of particle behavior is becoming more important in performance evaluation of water treatment system as well as in operation of the system because conventional parameter, turbidity has lack of explaining ability on small sized microorganisms such like Cryptosporidium etc. Accordingly, particle counter has been introduced in evaluation and operation of the treatment system. However researches on the relationship between turbidity, particle count and/or different sand/anthracite sizes have not been concurrent. Therefore in this study, the relationship was investigated to improve performance evaluation of sand filter so as to help choosing sand/anthracite effective size as a design parameter of water treatment facility. According to the results, too small or too large effective size media filter reached to turbidity limit(0.1 NTU)earlier. However, because shallow sand layer may cause early breakthrough, the depth of sand layer should be provided enough in order to compromise water quality and productivity.

• Computers and Concrete
• /
• 제29권4호
• /
• pp.237-246
• /
• 2022

The concrete quality relies on general factors like preparation technique, uniformity of the compaction, amount and appropriateness of the additives. The current article investigates the impact of a well knows amino acid, L-arginine as an additive on water requirements, setting durations and characterization of various cement samples. Compressive strength tests of reference and L-arginine added cements at age of 2, 7 and 28 days were carried out according to TS-EN 196-1. Samples were blended by incorporating various amounts of L-arginine (25 ppm, 50 ppm and 75 ppm) in the cement water mixture which were tested with Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermo-gravimetric analysis (TG), scanning electron microscopy (SEM) and the energy-dispersive X-ray spectroscopy (EDS) on the 28th day. Results revealed that L-arginine does not affect the setting time, volume expansion of cement and water demands negatively; rather it imparts enhanced sustainability to the samples. It was determined that the highest value belonged to the 75L mortar with an increase of 2.6% compared to the reference sample when the compressive strengths of all mortars were compared on the 28th day. Besides, it has been observed that the development of calcium silicate hydrate or C-S-H gel, calcium hydroxide or CH and other hydrated products are associated with each other. L-arginine definitely has a contribution in the consumption of CH formed in the hydration process.

• 상하수도학회지
• /
• 제21권2호
• /
• pp.235-242
• /
• 2007

Road runoff water includes various heavy metals (zinc, Zn; lead, Pb; copper, Cu; chrome, Cr; cadmium, Cd; etc.) and pathogens (E-coli and coliform). Since these pollutants are significantly harmful to human beings and have negative impact on water streams, numerous studies have been conducted to determine the characterization of these non-point pollutants from road runoff water. However, since these non-point pollutant concentrations vary depending on road traffic, road construction, and road maintenance, measurement of pollutant loadings in different site is necessary to estimate the effect of road runoff water on drinking water source. The objective of this study was to examine the quality of road runoff water from a city bridge in Seoul, Korea. This study was conducted for two years to assess annual discharge pollution loads. In this study, five key heavy metals (Zn, Pb, Cu, Cr, and Cd) and two pathogens (E-coli and coliform) were measured at 18 different events. The pollutant load mass transported was always higher than the corresponding runoff volume for Zn, Cu, and Cd, while Pb and Cr showed similar values between the load mass transported and the corresponding runoff volume. The event mean concentrations were Zn (0.908 mg/L), Pb (0.092 mg/L), Cu (0.141 mg/L), Cr (0.023 mg/L), and Cd (0.006 mg/L). Like Zn, Cu, and Cd, E-coli and coliform values (relatively high in Summer and Fall) are higher at the beginning of each event and decrease afterwards.

• Journal of Forest and Environmental Science
• /
• 제33권2호
• /
• pp.113-121
• /
• 2017

In flight particulate matter particularly emissions generated by incomplete combustion processes has become a subject of global concern due to the health problems and environmental impacts associated with them. This has compelled most countries to set standards for coarse and fine particles due to their conspicuous impacts on environment and public health. This contribution therefore explores forest fire emissions and how its particulates affects air quality, damage to vegetation, water bodies and biological functions as architects for lung diseases and other degenerative illnesses such as oxidative stress and aging. Soot was collected from simulated forest fire using a clean glass surface and carefully transferred into amber vials for analysis. Volatile components of soot were collected over 10 mL dichloromethane and analyzed using a QTOF Premier-Water Corp Liquid Chromatography hyphenated to a mass selective detector (MSD), and Gas Chromatograph coupled to a mass spectrometer (GC-MS). To characterize the size and surface morphology of soot, a scanning electron microscope (SEM) was used. The characterization of molecular volatiles from simulated forest fire emissions revealed long chain compounds including octadec-9-enoic acid, octadec-6-enoic acid, cyclotetracosane, cyclotetradecane, and a few aromatic hydrocarbons (benzene and naphthalene). Special classes of organics (dibenzo-p-dioxin and 2H-benzopyran) were also detected as minor products. Dibenzo-p-dioxin for instance in chlorinated form is one of the deadliest environmental organic toxins. The average particulate size of emissions using SEM was found to be $11.51{\pm}4.91{\mu}m$. This study has shown that most of the emissions from simulated forest fire fall within $PM_{10}$ particulate size. The molecular by-products of forest fire and particulate emissions may be toxic to both human and natural ecosystems, and are possible precursors for various respiratory ailments and cancers. The burning of a forest by natural disasters or man-made fires results in the destruction of natural habitats and serious air pollution.

• 미생물학회지
• /
• 제34권4호
• /
• pp.200-206
• /
• 1998

암모니아와 아민류가 주된 악취원인 실가동 분뇨처리장의 악취가스를 생물탈취탑에서 처리하기위한 연구의 일환으로 다양한 비율의 소나무 껍질, 분변토, 퇴비로 구성된 생물여재를 적용하는 탈취탑 여재내의 세균 분포 및 특성을 조사하였다. 153일간 사용한 탈취탑내 여재(이하 사용후)와 악취처리에 사용하지 않은(이하 사용전) 여재 각각을 대상으로 하였다. 그 결과 사용전 여재는 질산화한천 배지, 황산화한천 배지, 표준한천 배지 상에서 g당 $10^7{\sim}10^8$ 수준의 세균이 존재하였고 사용후 여재 역시 $10^5{\sim}10^7$에 이르는 다량의 세균이 존재하였다. 또한 질산화한천 배지에서 사용전 여재와 사용후 여재 모두 큰 차이 없이 간균과 구균이 존재하였다. 종속영양 세균 총 45주를 분리하여 동정한 결과 Pseudomonas, Bacillus, Flavobacterium, Alcaligenes속 등이 분리되었으며, 그 중 21주는 질산화한천 배지 상에서 집락을 형성한 것을 표준한천 배지에서 재 분리하여 동정하였는데 표준한천 배지 상에서 직접 분리한 분리주보다 Alcaligenes가 특징적으로 많이 분리되었다. Alcaligenes는 사용후 여재에서 높은 비중으로 검출되었고, 처리가 우수한 분변토 혼합여재에서의 검출비중이 소나무껍질여재보다 높아 생물탈취처리의 기여도가 높은 것으로 사료되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.342-345
• /
• 1997

We fabricated the sample of u1tra thin lipid membrane(L-${\alpha}$-DLPC ) by LB methode. The $\pi$-A isotherm of the DLPC was measured at the air-water interface varying with the compressing speed and amounts of solutions for spreading. For good property of lipid monolayer film, it was necessary for the lower speed of compressing, and 40${\mu}\ell$ of solutions for spreading. The molecular arrangement of deposited films were evaluated by measuring the absorption, transmitance and intensity with the UV spectrophotometer. The Y-type multilayers prepared at 50mN/m showed weaker than Z-type. So we found building-up of structurally high quality LB films is essential to study properties of the films and to get reproducible data.

• Journal of Ginseng Research
• /
• 제34권4호
• /
• pp.282-287
• /
• 2010

An optimized manufacturing process was developed for the production of high-quality loess red ginseng using a hybrid process in which loess (yellow earth) was incorporated into the conventional ginseng manufacturing process system. We designed conventional ginseng processing facilities and prepared the loess module by baking loess that contained 42% water at $860^{\circ}C$ for 8 h. The loess module showed excellent performance in deodorization and humidity control. The optimum steaming temperature at which maximum expansion of starch organisms occurred was 90 to $98^{\circ}C$.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권6호
• /
• pp.548-554
• /
• 1997

We fabricated the sample of ultra thin lipid membrane(L-$\alpha$-DLPC) by LB method. The $\pi$-A isotherm of the DLPC was measured at the air-water interface varying with the compressing speed and amounts of solutions for spreading. For the good property of lipid monolayer film, it was necessary to prepare at the lower speed of compressing, with an appropriate volume of solutions for spreading. Absorption, transmitance and intensity with the UV spectrophotometer were measured. The Z-type multilayers showed good characteristics better than Y-type. So we found building-up of structurally high quality LB films is essential to study properties of the films and to get reproducible data.

• 한국식생활문화학회지
• /
• 제36권6호
• /
• pp.640-648
• /
• 2021

In this study, when manufacturing Yakgwa, 0, 25, or 50% of embryonic rice flour (ERF) was substituted for wheat flour (WF) to make the dough. After making Yakgwa by hot air frying (HF) or deep-fat frying (DF) methods, physicochemical characterization and acceptance tests were conducted. ERF had a higher water-binding capacity and a lower fat-binding capacity than WF (p<0.05). Yakgwa prepared by HF had lower crude fat contents, peroxide values, and expansion rates, but higher hardnesses, lightnesses, and rednesses (p<0.05) than that prepared by DF. Higher ERF substitution ratios reduced acid values and expansion rates and increased hardness (p<0.05). Acceptance testing showed 0% ERF Yakgwa prepared by HF had a significantly higher acceptance than Yakgwa prepared by DF. HF was found to have a positive effect on product acceptability. Yakgwa prepared with the DF method by substituting WF with ERF resulted in better flavor and overall acceptability than Yakgwa prepared with WF alone (p<0.05).