• Korean journal of food and cookery science
• /
• v.9 no.3
• /
• pp.198-203
• /
• 1993

The objective of this study was to evaluate the effect the Seokibyung, when the ingrdients were changed in a variety aspects ; the amount of Seoki flour to rice flour, and several kinds of sweeteners such as sugar, honey and syrup and condition of water. The evaluation of these result were as followings ; 1. According to sensory evaluation, the, flavor, grain, softness, moistness, chewiness, sweetness, overalquality of Seokibyung were the most excellent the mixture of 60g sugar, 280g rice flour, 70g glutious rice flour and 10.5g seoki flour mixed in 90$m\ell$ boiled water. 2. According to Instron evaluation that the higer level resulted to the left to the right treatment that Hardness : syrup, honey, sugar Cohesiveness : honey, syrup, sugar, Adhesiveness : syrup, honey, sugar Gumminess : honey, syrup, sugar Springness : honey, sugar, syrup, Chewiness : honey, syrup, sugar. there was no significant difference among the three treatment groups in each experimental group. 3. The Color & color difference evaluation_that Overall color difference was sugar, honey, syrup in turn. 4. percentages of moisture of honey-added, sugar-added and syrup-added Seokibyung were 42.49%, 41.45% and 36.73% respectively.

• Geophysics and Geophysical Exploration
• /
• v.8 no.2
• /
• pp.145-155
• /
• 2005

A two-dimensional (2-D) interpretation of MT data has been performed for the purpose of fracture detection for geothermal development. Remote stations have been operated in Kyushu, Japan (480 km apart) as well as in Korea (60 km and 165 km apart in 2002 and 2003 data set, respectively). Apparent resistivity and phase curves calculated by remote processing with the Japan remote data showed enough quality for 2-D inversion for the whole frequency range. Remote reference processing with Korea remote reference data also showed quite good continuity in apparent resistivity and phase curves except some noisy frequency bands; around the power frequency, 60 Hz, and around the dead band $10^{-1}Hz\;Hz\;\~1\;Hz$, where the natural EM signal is known to be very weak. Even though the subsurface showed severe three-dimensional (3-D) characteristics in the survey area so that 2-D inversion by itself could not give enough information for deep geological structures, the 2-D inversion for the 5 survey lines showed several common features. The conductive semi-consolidate mudstone layer is dipping from north to south (about 500 m depth on the south and 200 m on the north most part of the survey area). The boundary between the low (L-2) and high (H-2) resistivity anomalies can be thought as a major fault with strike $N15^{\circ}E$, passing through the sites 206, 112 and 414. The shallow (< 1 km) conductive anomalies (L-4) seem to be fracture zones having strike E-W (at site 105) and $N60^{\circ}W$ (at site 434). And there exists a conductive layer in the western and west-southern part of the survey area in the depth below $2\~3\;km$, for which further investigation is to be needed.

• Economic and Environmental Geology
• /
• v.48 no.1
• /
• pp.25-39
• /
• 2015

$CO_2$ geological storage plays an important role in reduction of greenhouse gas emissions, but there is a lack of research for CCS demonstration. To achieve the goal of CCS, storing $CO_2$ safely and permanently in underground geological formations, it is essential to understand the characteristics of them, such as total storage capacity, stability, etc. and establish an injection strategy. We perform the impedance inversion for the seismic data acquired from the Ulleung Basin in 2012. To review the possibility of $CO_2$ storage, we also construct porosity models and extract attributes of the prospects from the seismic data. To improve the quality of seismic data, amplitude preserved processing methods, SWD(Shallow Water Demultiple), SRME(Surface Related Multiple Elimination) and Radon Demultiple, are applied. Three well log data are also analysed, and the log correlations of each well are 0.648, 0.574 and 0.342, respectively. All wells are used in building the low-frequency model to generate more robust initial model. Simultaneous pre-stack inversion is performed on all of the 2D profiles and inverted P-impedance, S-impedance and Vp/Vs ratio are generated from the inversion process. With the porosity profiles generated from the seismic inversion process, the porous and non-porous zones can be identified for the purpose of the $CO_2$ sequestration initiative. More detailed characterization of the geological storage and the simulation of $CO_2$ migration might be an essential for the CCS demonstration.

• Horticultural Science & Technology
• /
• v.33 no.4
• /
• pp.605-617
• /
• 2015

The ultimate goal of this research is to develop a botanical biofiltration system that combines a green interior, biofiltering, and automatic irrigation to purify indoor air pollutants according to indoor space and the size of biofilter. This study was performed to compare the stability of air flow characteristics and removal efficiency (RE) of fine dust within a wall-typed (vertical) botanical biofilter depending on humidifying cycle and to investigate RE of volatile organic compounds (VOCs) by the biofilter. The biofilter used in this experiment was designed as an integral form of water metering pump, water tank, blower, humidifier, and multi-level planting space in order to be suitable for indoor space utilization. As a result, relative humidity, air temperature, and soil moisture content (SMC) within the biofilter showed stable values regardless of three different humidifying cycles operated by the metering pump. In particular, SMCs were consistently maintained in the range of 27.1-29.7% during all humidifying cycles; moreover, a humidifying cycle of operating for 15 min and pausing for 45 min showed the best horizontal linear regression (y = 0.0008x + 29.09) on SMC ($29.0{\pm}0.2%$) during 120 hour. REs for number of fine dust (PM10) and ultra-fine dust (PM2.5) particles passed through the biofilter were in the range of 82.7-89.7% and 65.4-73.0%, respectively. RE for weight of PM10 passed through the biofilter was in the range of 58.1-78.9%, depending on humidifying cycle. REs of xylene, ethyl benzene, total VOCs (TVOCs), and toluene passed through the biofilter were in the range of 71.3-75.5%, while REs of benzene and formaldehyde (HCHO) passed through the biofilter were 39.7% and 44.9%, respectively. Hence, it was confirmed that the wall-typed botanical biofilter suitable for indoor plants was very effective for indoor air purification.

• Food Science and Preservation
• /
• v.20 no.5
• /
• pp.643-649
• /
• 2013

The antioxidant activity and amino acid composition of various Cheonggukjang extracts, such as the water extract from Cheonggukjang (CWE), the alcohol extract from Cheonggukjang (CEE), the water extract from Cheonggukjang with black garlic (BWE) and the alcohol extract from Cheonggukjang with black garlic (BEE), were examined to investigate the effect of black garlic on the sensory quality and functional properties of Cheonggukjang. The total polyphenol contents of various extracts were 7.03 mg/100 g (BWE), 3.64 mg/100 g (CWE), 2.88 mg/100 g (BEE) and 0.81 mg/100 g (CEE). The radical scavenging activity of the DPPH radical was highest in BWE (91.83%), followed by BEE (37.35%), CWE (25.54%) and CEE (14.80%), in that order. The SOD-like activity was highest in BWE (20.20%), followed by BEE (9.22%), CWE (7.91%) and CEE (6.45%). The thiobarbituric acid reactive substances (TBARS) were highest in BWE (35.18%), followed by BEE (28.33%), CWE (17.40%) and CEE ((14.93%). The total amino acid content of Cheonggukjang (CC) was higher than that of Cheonggukjang with black garlic (CCWB), but the essential amino acid content of CCWB (43.18%) was higher than that of CC (42.27%). The 27 kinds of free amino acid were found in CC, but only 23 kinds were found in CCWB. The L-lysine content was highest (9.23%) in CC, and the L-phenylalanine content was highest (23.14%) in CCWB. The free amino acids (L-threonine, L-serine, L-sarcosine, L-proline, L-alanine, L-valine and D,L-${\beta}$-aminoisobutyric acid) were found in CC but not in CCWB. The ${\gamma}$-amino-n-butyric acid (GABA) was found in CCWB but not in CC. These results suggest that the addition of black garlic has beneficial effects on the functionality of Cheonggukjang without decreasing its sensory characteristics.

• Korean Journal of Remote Sensing
• /
• v.26 no.2
• /
• pp.251-262
• /
• 2010

In order to provide quantitative control of the standard products of Geostationary Ocean Color Imager (GOCI), on-board radiometric correction, atmospheric correction, and bio-optical algorithm are obtained continuously by comprehensive and consistent calibration and validation procedures. The calibration/validation for radiometric, atmospheric, and bio-optical data of GOCI uses temperature, salinity, ocean optics, fluorescence, and turbidity data sets from buoy and platform systems, and periodic oceanic environmental data. For calibration and validation of GOCI, we compared radiometric data between in-situ measurement and HyperSAS data installed in the Ieodo ocean research station, and between HyperSAS and SeaWiFS radiance. HyperSAS data were slightly different in in-situ radiance and irradiance, but they did not have spectral shift in absorption bands. Although all radiance bands measured between HyperSAS and SeaWiFS had an average 25% error, the 11% absolute error was relatively lower when atmospheric correction bands were omitted. This error is related to the SeaWiFS standard atmospheric correction process. We have to consider and improve this error rate for calibration and validation of GOCI. A reference target site around Dokdo Island was used for studying calibration and validation of GOCI. In-situ ocean- and bio-optical data were collected during August and October, 2009. Reflectance spectra around Dokdo Island showed optical characteristic of Case-1 Water. Absorption spectra of chlorophyll, suspended matter, and dissolved organic matter also showed their spectral characteristics. MODIS Aqua-derived chlorophyll-a concentration was well correlated with in-situ fluorometer value, which installed in Dokdo buoy. As we strive to solv the problems of radiometric, atmospheric, and bio-optical correction, it is important to be able to progress and improve the future quality of calibration and validation of GOCI.

• Korean Journal of Poultry Science
• /
• v.48 no.4
• /
• pp.287-295
• /
• 2021

In this study, we aimed to evaluate the impact of different feed withdrawal periods (2, 3, 4, 5, and 6 h) on Salmonella contamination in the crop, intestinal weight, and blood parameters of broilers before harvesting. A total of 100 broilers (initial live weight 1.906±0.06 kg) were randomly assigned to the same five treatment groups and broilers had access to water but no feed before catching. Feed withdrawal times were 2, 3, 4, 5, and 6 h prior to slaughter. Measurements included live weight, pre-slaughter weight, carcass weight, weight of gastrointestinal tract. In addition, Salmonella and Campylobacter contamination in the crop, serum biochemical profiles, counts of leukocytes, erythrocytes, and platelets, and meat quality were assessed. The results demonstrate that carcass weight, blood corticosterone, meat pH, meat color, and water holding capacity did not differ based on the feed withdrawal time. Carcass yield increased as the withdrawal time increased, but the weights of the crop, proventriculus, jejunum, ileum, and rectum were significantly reduced by 6 h (P<0.05). Salmonella counts were the lowest in the crops subjected to 6 h of feed withdrawal (P<0.05). Shear force was highest in chicken breast meat after 6 h of feed withdrawal (P<0.05). However, when the feed was withdrawn after 6 h, the shear force increased, but it did not affect the sensory characteristics in consumers, and the Salmonella count also decreased and had a reduction effect on contamination during slaughter. These findings can serve as reference data for setting the feed withdrawal time.

• Journal of the Korean Wood Science and Technology
• /
• v.7 no.2
• /
• pp.3-30
• /
• 1979

Larch ($\underline{Larix}$ $\underline{leptolepis}$ GORDON), one of the major afforestation species in Korea in view of its growing stock and rate of growth, is not favored as a raw material for pulp due to its low yield of pulp and difficulties with bleaching arising from the high content of extractives in wood, and the high heartwood ratio and the active phenolics, respectively. The purpose of this study is to investigate the characteristics of firstly pulping with various additives of cellulose protector for the yield of pulp, and secondly bleaching with oxygen for chlotination-alkali extraction of five stage-sequence to reduce chlorine compounds in bleaching effluents. The kraft cooking liquor for five age groups of larchwood was 18 percent active alkali with 25 percent sulfidity and 5 : 1 liquor-to-wood ratio, and each soda liquor for sap-and heart-wood of the 15-year-old larchwood was 18 percent alkali having one of the following cellulose protectors as the additive; magnesium sulfate ($MgSO_4$, 2.5%), zinc sulfate ($ZnSO_4$, 2.5%), aluminium sulfate ($Al_2(SO_4)_3$, 2.5%), potasium iodide (KI, 2.5%), hydroquinone (HQ, 2.5%), anthraquinone (AQ, 0.1%) and ethylene diamine (EDA, 2.5%). Then each anthraquinone-soda liquor for the determination of suitable cooking condition was the active alkali level of 15, 17 and 19 percent with 1.0, 0.5 and 0.1 percent anthraquinone, respectively. The cooking procedure for the pulps was scheduled to heat to 170$^{\circ}C$ in 90 minutes and to cook 90 minutes at the maximum temperature. The anthraquinone-soda pulps from both heartwood and sapwood of 15-year-old larchwood prepared with 0.5 percent anthraquinone and 18 percent active alkali were bleached in a four-stage sequency of OCED. (O: oxygen bleaching, D: chlorine dioxide bleaching and E: alkali extraction). In the first stage oxygen in atmospheric pressure was applied to a 30 percent consistency of pulp with 0.1 percent magnesium oxide (MgO) and 3, 6, and 9 percent sodium hydroxide on oven dry base, and the bleached results were compared pulps bleached under the conventional CEDED (C: chlorination). The results in the study were summarized as follows: 1. The screened yield of larch kraft pulp did not differ from particular ages to age group, but heartwood ratio, basic density, fiber length and water-extractives contents of wood and the tear factor of the pulp increased with increasing the tree age. The total yield of the pulp decreased. 2. The yield of soda pulp with various chemicals for cellulose protection of the 15-year-old larchwood increased slightly more than that of pure soda pulp and was slightly lower than that of kraft pulp. The influence of cellulose protectors was similar to the yield of pulps from both sapwood and heartwood. The effective protectors among seven additives were KI, $MgSO_4$ and AQ, for which the yields of screened pulp was as high as that of kraft pulp. Considering the additive level of protector, the AQ was the most effective in improving the yield and the quality of pulp. 3. When the amount of AQ increased in soda cooking, the yield and the quality of the pulp increased but rejects in total yield increased with decreasing the amount of active alkali from 19 to 15 percent. The best proportion of the AQ seemed to be 0.5 percent at 17 percent active alkali in anthraquinone-soda pulping. 4. On the bleaching of the AQ-soda pulp at 30 percent consistency with oxygen of atomospheric pressure in the first stage of the ODED sequence, the more caustic soda added, the brighter bleached pulp was obtained, but more lignin-selective bleaching reagent in proportion to the oxygen was necessary to maintain the increased yield with the addition of anthraquinone. 5. In conclusion, the suitable pulping condition for larchwood to improve the yield and quality of the chemical pulp to the level for kraft pulp from conventional process seemed to be. A) the selection of young larchwood to prevent decreasing in yield and quality due to the accumulation extractives in old wood, B) the application of 0.5 percent anthraquinone to the conventional soda cooking of 18 percent active alkali, and followed, C) the bleaching of oxygen in atmospheric pressure on high consistency (30%) with 0.1 percent magnesium oxide in the first stage of the ODED sequence to reduce the content of chlorine compounds in effluent.

• Journal of the Korean Geographical Society
• /
• v.30 no.1
• /
• pp.35-56
• /
• 1995

During the last two decades, Korea has achieved remarkable economic growth. In this process the nation has become urbanized and industrialized. But we have also encountered widening regional disparity, housing shortage of larger cities, transportation congestion, environmental pollution and many other problems. Rapid increasing urbanization and continuous migration toward Seoul since the late 1960s have been one of the major concerns of government. Government has sought ways to moderate the population increase in Seoul. The regulation which include new town development near Seoul and dispersion strategies of higher education and other administration and living facilities outside of Seoul havemade a great expansion of the spatial influence of Seoul city. Seoul metropolitan reaion has evolved as the most powerful center of political and economical spaces. Generally within a metropolitan region, there exists a growing mutual interdependence economically, as well as socially between a central city and its surrounding area. Seoul metropolitan region manifests itself not only as a coherent system of urbanized regions, but also as an integral part of the daily urban system. The surrounding Gyunggi province and Seoul city become closely linked both economically and functionally, constituting true functlonai urban system. This study is primarily undertaken with the purpose of delineation of the sphere of influence of Seoul city in 1990. At the time of 1985, Seoul metropolitan region was delineated according to the result of the study which was performed by Korea Research Institute for Human Settlements. Afterward, the rapid speed of metropolitanization process with dramatic increase in mobility through the provision of wider transportation system across the Capital region have evolved, resulting in the great expansion of the spatial influence of Seoul city. So this study examines the expanded area of Seoul metropolitan regin during the period of 1985-90. In order to delineate Seoul metropolitan region, the indices of urbanization and functional linkage are selected. Variables included in the measurement of the urbanization level are agricultural structure, population characteristics, manufacturing and service industries, and cultural aspects such as newspaper circulation, the ratio of car ownership and piped water supply. Variables included in the measurement of functional linkage are commuting, shopping pattern, centralized service such as medical facilities and trade of agricultural products. The standardization method and factor analysis are employed in making the delineation of Seoul metropolitan region. According to the result of this study, 2 cities, 8 Eups and 46 Myuns are included Seoul metropolitan region in 1990. If we compare this delineated area in 1990 to that of 1985, we can find the distinctive pattern of expanded axes according to the main transportation routes such as Seoul-Suweon, Seoul-Gwangju, Seoul-Incheon. In 199O, all the Gyunggi province, except a few Myuns located at the north and northwest part of Gyunggi province, are included in Seoul metropolitan region. Furthermore, this study attempts to the analysis of regional structure of Seoul metropolitan region according to the functional characteristics of each city and Gun. Variables included in this analysis are the new residential function, manufacturing function, service function, education and infermation function, public facility function and agricultural function. Factor analysis and cluster analysis are employed in making regionalization. Seoul metropolitan reaion is subdivided into four subregions which reflect different functional specialization. The first group is the specialized region of newly formed residential function. The second group is the specialized reaion of manufacturing function. The third group is the specialized region of service function. And the fourth group has little specialized in terms of manufacturing, service, and residential function. But this region has some potentiality of development when Seoul metropolitan region grow continuously. Seoul metropolitan region accounted for 43% of national population, despite 11.8% of national land size in 1990. Although Seoul metropolitan region enjoys important agglomeration economies, it also has huge social cost in the form of transportation congestion, housing shortage, rapid increase of land value, environment pollution, and etc. Efficient metropolitan plan making is a vital element in promoting Seoul's economic development and providing high quality living environment at low cost. In the light of the result of this study, the outer ring of Seoul metropolitan region, especially northeastern part, are underdeveloped compared to overdeveloped southwestern area. It is needed to develop the guidelines for the implement of the growth control and management plan, inducing more balanced development for whole Seoul metropolitan reaion.

• Journal of Animal Science and Technology
• /
• v.47 no.6
• /
• pp.1059-1066
• /
• 2005

The objective of this study was to investigate the physico-chemical characteristics of chicken breast surimi processed by four times washing (C) and adjustment to pH 3.0 (T1) and pH 11.0 (T2). Water, crude protein, myofibrillar protein and yield of the treatment C were lower compared to other two treatments. Crude fat of T2 was higher than other two treatments. pH, WHC, breaking force and deformation were not different among the treatments. Shear force of T2 was the highest, followed by T1 and C. L* of T2 and a* of T1 were lower than other two treatments. b* of C was the highest, while T2 was the lowest. Brittleness and hardness in textural properties were not different among the treatments. Cohesiveness of T1 was the lowest among three treatments. Springiness and chewiness of T1 and T2 were higher than those of treatment C, respectively. Gumminess of T2 were higher compared to C and T1. Appearance and flavor in sensory evaluation were the highest in T1 and the lowest in C among three treatments. Color, aroma, juiciness, tenderness and overall acceptability were not different among the treatments. In conclusion, physico-chemical quality of chicken breast surimi was the highest in T2 among three treatments.