• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.12
• /
• pp.1823-1829
• /
• 2016

This study investigated the optimal percentage of brownies substituted with rice bran dietary fiber (3%, 6%, 9%, and 12%). The sample and control were compared for quality characteristics, specific gravity, viscosity, pH, moisture content, water activity, specific volume, color, textural characteristic, consumer acceptance, and CATA (check-all-that-apply). The specific gravity of the control sample was not significantly different among the samples. The viscosity was highest at the brownie containing 12% of rice bran dietary fiber. Moisture content and water activity were highest in the 6% sample. pH of control sample batter was highest, but reduced with increasing amounts of rice bran dietary fiber. For colors, lightness of the 6% sample batter was highest at 25.31, and redness and yellowness significantly increased with increasing amounts of rice bran dietary fiber. For textural characteristics, hardness, and chewiness significantly increased with increasing amounts of rice bran dietary fiber. Cohesiveness and resilience were not significantly different between samples. In the sensory evaluation, overall acceptability was highest in the control group and lowest for the 12% sample. In the frequency analysis of the CATA, as rice bran dietary fiber was added, the amount of bran flavor, oliy, and unpleasant increased while frequency of bitterness, sweetness, and chocolate taste decreased. In the principal component analysis, characteristics of unpleasant, oily, soybean flavor, and sweetness were strongly detected in the 12% sample. The control sample showed strong sweetness and bitterness. The results indicate that 3% to 6% rice bran dietary fiber is appropriate for production of brownies.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.3
• /
• pp.171-178
• /
• 2013

In this study, the sludge that occurs in the initial operation of coagulation system developed for the treatment of CSOs were returned to the flocculation reactor. The purposes of this study were to analyze the Characteristics of flocs that are generated through the recycling sludge and settling characteristics of sludge, and to evaluate the possibility that high concentrations of particulate matter in the initial inflow of CSOs could be used as an weighted coagulant additive. As a result, the concentration of treated CSOs pollutants at the beginning of the CSOs influent with a large amount of particulate matter over 20 ${\mu}m$ was low, after gradually increasing the concentrations of them. The flocs generated from the sludge return were similar in size compared to flocs generated through injection of micro sands, and settling velocity in case of return sludge injection was decreased from 55.1 cm/min to 21.5 cm/min. SVI value of the sludge accumulated at the bottom of the sedimentation tank was 72, and settled sludge volume decreased rapidly due to the consolidation of sludge to the time it takes to 10 minutes. these mean that sludge used for recycling has good settling characteristic. A condition of returned sludge which is 0.1% return of 0.3% extraction was formed in the balance of settlement and extraction. In this case, This condition was to be adequate to maintain the proper concentration such as 100~200 mg/L of TS and 50~100 mg/L of VS in the flocculation reactor. The usage of the return sludge containing particulate matters of CSOs as an weighted coagulant additive was able to secure a stable treated water quality despite the change of influent water quality dynamically. Furthermore, it can be expected to reduce the alum dosage along with the sludge production.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.5
• /
• pp.734-744
• /
• 2011

A soil stabilization method is an effective and practical remediation alternative for arsenic (As) and heavy metal contaminated farmland soils nearby abandoned metal mine in Korea. This method is a technique whereby amendments are incorporated and mixed with a contaminated soil. Toxic metal bind to the amendments, which reduce their mobility in soil, so the successful stabilization of multi-element contaminated soil depends on the combination of critical elements in the soil and the type of amendments. The objective of this study is to investigate the treatment effects and applicability of limestone (LS) and steel refining slag (SRS) as the amendment for farmland soil contaminated with As and heavy metals, and a lab-column test was conducted for achieving this purpose. The result showed that soil treated with LS and SRS maintained pH buffer capacity and, as a result, the heavy metal leaching concentration was quite low below the water quality standard compared to untreated soil which leachate exceeding the water quality standard was observed, however, the arsenic concentration rather increased with increasing mixture ratio of SRS. This was believed to be related to phosphorus (P) contained in SRS, and dominancy in the competitive adsorption relation between As and P binding strongly to iron might be different according to soil characteristic. We suggested that LS is a effective amendment for reducing heavy metals in soil, and SRS should be used after investigating its applicability based on the adsorption selectivity of arsenic and phosphorus in selected soil.

• Korean Chemical Engineering Research
• /
• v.47 no.5
• /
• pp.639-645
• /
• 2009

In this study, alkanolamine was used to achieve high absorption rates for $CO_2$ as suggested at several literatures. The absorption rates of aqueous AMP and MEA solutions with $CO_2$, $SO_2$, $NO_2$ were measured using a stirredcell reactor. The reaction rate constants were determined from the measured absorption rates. The performances were evaluated under various operating conditions. As a result, the reactions with $SO_2$, $NO_2$ into aqueous AMP and MEA solutions were classified as an instantaneous reaction respectively. The absorption rates increased with increase of the reaction temperature and the concentration of absorbents. The simultaneous absorption rate of $CO_2/SO_2/NO_2$ into 3, 5, 10 wt.% MEA at various pressure of $CO_2/SO_2/NO_2$, was more increased 14~20% than AMP solution. We investigated the effect of $SO_2$ and $NO_2$ on the simultaneous absorption of $CO_2/SO_2/NO_2$ from a flue gas. The performances were evaluated under various operating conditions in order to investigate the absorption characteristic.

• Journal of Ginseng Research
• /
• v.37 no.3
• /
• pp.349-354
• /
• 2013

Dried ginseng (DG) is in fact the representing ginseng product in the worldwide market. Although it is made in various packages depending on the processing method, size and age of DG, basic scientific data reporting the chemical components are limited. In this study, 4-year-old curved ginseng (CG), one of the domestic DG products, was selected for further investigation. Eighty-six samples of 30 and 50 piece-grade CG, which are the most widely distributed in the market, were collected for 5 yr. Their major components, such as moisture, total sugar, acidic polysaccharides, total phenolic compounds, and saponins, were analyzed to figure out the standard quality characteristics. The moisture content of all CG samples was less than 15%. The total water-soluble sugar contents were 22.9% to 47.8% and 23.2% to 49.5% in the 30 and 50 piece-grade CG, respectively. The acidic polysaccharide contents were 3.6% to 6.7% and 2.9% to 6.9% in the 30 and 50 piece-grade CG, respectively. The total phenolic compound content was 0.4% to 0.5% in CG, regardless of the piece-grade. The crude saponin content, which represents the active component of ginseng, was over 2% in all samples. In 30 piece-grade CG samples, the contents of major ginsenosides, Rb1, Rf, and Rg1, were 2.2 to 4.7 mg/g, 0.4 to 1.3 mg/g, and 1.6 to 4.0 mg/g, respectively. The ginsenoside contents in 50 piece-grade CG samples were 2.1 to 3.9 mg/g (Rb1), 0.5 to 1.2 mg/g (Rf), and 1.3 to 3.4 mg/g (Rg1). Overall, since there were relatively high standard deviation and coefficient of variation in all the chemical component contents that were assessed, we found some difficulties in showing the CG standard chemical component characteristics by average, standard deviation, and other statistical analysis factors.

• The Korean Journal of Food And Nutrition
• /
• v.27 no.6
• /
• pp.1006-1013
• /
• 2014

This study is aimed at examining the usefulness of mugwort as an alternative of western herb by making widely known tomato sauce with mugwort powder added, the ingredient that has a bio-active substance. The control group showed the highest percentage of water from tomato sauce, 89.24%. The sauce with mugwort added in by 2% showed the lowest pH, 4.55. The brightness L value for chromaticity got lower significantly (p>0.001) as the amount of added mugwort increased, and red a value and yellow b value were high in the control group for 18.06 and 16.84 respectively, and got reduced as the amount of added mugwort increased. The salinity was the highest in the sauce mugwort added in by 2% for 1.02. Sugar content and reducing sugar were the lowest in the sauce mugwort added in by 2% for 9.49 and 56.01. As measuring total count change, no microorganism was found until $10^{th}$ day of storage, and was 0% $1.7{\times}10^3CFU/mL$ on the $15^{th}$ day, and no microorganism was found in the 1.5% and 2% added groups. Lastly for 60 days of storage, the control group without mugwort showed the highest microorganism count for $3.1{\times}10^8CFU/mL$ In a sensory test, color was in the 1% added group was 5.28, higher than the control group which showed 4.78, but there was no significant difference. Taste was rated most highly in the 1.5% added group for 5.65. After taste was also rated most highly in the 1.5% added group for 5.8. Overall preference was the highest in the 1% added group for 5.79. From the results, tomato sauce with mugwort added in showed the high storage capacity and was rated highly in the preference test. The possibility of the alternative of western spice and the potential to use Korean spice for other western spice were observed again.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.1
• /
• pp.1-6
• /
• 2006

Biological nutrient removal(BNR) process used in this study, which was packed with EPS(expanded polystylene) media, has more many advantages in aspect of reducing hydraulic retention time(HRT) of the process and having less effect of temperature in the winter season than commercial process in the present. Bench-scale study was performed using domestic wastewater. In the results, it was observed that the T-N removal efficiencies in HRT 6 hr and HRT 4 hr were 55% and 51%, respectively, showing the small reduction (about 4%) of T-N removal efficiency according to shortening of HRT. In comparison of T-N removal characteristic in summer and winter seasons, it showed that T-N removal efficiencies in summer and winter seasons were 65% and 54%, respectively, showing the 11% lower T-N removal efficiency in winter season than in summer season due to deterioration of nitrification in winter season. In the studies of influent loading rate and C/N ratio, the process showed stable effluent quality under the condition of broad influent loading rate and C/N ratio. Therefore, it is anticipated that the developed process in this study could be applicable to small wastewater treatment plant in nutrient removal.

• Food Science and Preservation
• /
• v.21 no.3
• /
• pp.350-356
• /
• 2014

Bobsikhae and Bellflower tea-added Bobsikhae samples were prepared. Their general ingredients and useful ingredients were analyzed. Among the general ingredients of the two samples, the crude protein, crude fat, crude ash, and carbonhydrate contents, but not the water, were found to have been higher in the Bellflower tea-added Bobsikhae. To summarize all the results of this study by comparing Bobsikhae with Bellflower tea-added Bobsikhae that used the Bellflower root with edible and medicinal values, their general ingredient contents were similar, but the lactic acid bacteria all tended to be higher in the Bellflower tea-added Bobsikhae. The results of the sensory evaluation showed that the overall taste and general acceptability were better in the Bellflower tea-added Bobsikhae than in the Bobsikhae. Thus, the Bellflower tea-added Bobsikhae is considered ideal for further commercialization. However, it was determined that further studies will be required to show if the bioactive substance would be influenced by the fermentation in the production progress of the Bellflower tea. Such findings and their application to the product development are expected to contribute much to the popularization of Bobsikhae.

• Journal of the Korea Concrete Institute
• /
• v.19 no.4
• /
• pp.393-399
• /
• 2007

Concrete bridge decks are directly exposed to the severe environmental conditions such as rain water and deicing chemicals resulting in the freeze-thaw action and the rebar corrosion during their service lift. These deteriorations of bridge decks shorten the service lift and consequently they are the major concerns of the maintenance. The high performance concrete (HPC) deck is proposed as the alternative to minimize the deterioration problems. To develop more durable concrete deck, the performance characteristic tests of HPC mixtures were carried out. In this study, 4 different concrete mixtures were used varying the mineral admixtures as the cement replacement; ordinary portland cement (OPC), 20% fly ash (FA),20% fly ash with 4% silica fume (FS), and 40% ground granulated blast-furnace slag (BS). The design compressive strengths of HPC specimens were 27 MPa and 35 MPa, respectively. The results showed that the compressive strength of concrete did not much affect the durability of concrete. HPC with fly ash and silica lune (FS) were turned out to have the good durability and crack resistance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.206-211
• /
• 2020

Tungsten alloys are used widely in general industrial fields, but they are difficult to cast, so products are manufactured using powder metallurgy. In this study, a mixed powder of tungsten, nickel, and iron homogenized using a ball mill was added to pure water as a solvent, and PVA as a binder was added to prepare a spray drying mixture. The mixed liquid was prepared using a spraying machine. A study was carried out to produce a granular powder that can reduce the variations between products during the molding and sintering process of the powder metallurgy method. A preliminary experiment was conducted to confirm the influence of the variables in the granulation process. Through the preliminary test results, this experiment was performed with the volume of solvent of the spray drying the mixture as an independent variable, and granular powder having a mean particle size similar to that of the existing mass-production conditions and an increased apparent density was prepared. In addition, a pilot test was conducted for the molding and sintering process. The improved granular powder reduced the characteristic variation (weight variation) of the mass-produced product.