• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2000년도 춘계학술대회 논문집(Proceeding of the KOSME 2000 Spring Annual Meeting)
• /
• pp.115-121
• /
• 2000

As the development of industry water quality of river is going to bad because of waste water of an industrial complex and general home agricultural chemicals exhaust of $SO_3$ and CO gas acid rain and so on. Corrosion damage of boiler factory equipment and so forth occur quickly due to using of the polluted water resulting in increasing leak accident. Especially working life of hot water boiler using the polluted water becomes more short and energy loss increases. The cathodic protection method is the most economical and reliable one to prevent corrosion damage of steel structures. Mg-base alloys galvanic anode protection of cathodic protection method is suitable for than application of hot water boiler using water with high specific resistance such as tap water. This paper is studied on the cathodic protection characteristics of how water boiler. In tap water and 0.001mol/$\ell$ NaCl solution the characteristics of anodic polarization of Mg-base alloys galvanic anode and tube material is investigated the measurement of cathodic protection potential according to the time elaspsed is carried out.

• 상하수도학회지
• /
• 제27권1호
• /
• pp.129-138
• /
• 2013

Water interruption is often caused by a rupture in the branch-like singular pipeline. This will cause critical complaints from household and may decrease public service quality. As an alternative of singular pipeline, additional parallel pipeline could be installed for sustainable water supply. This system is called double pipeline system and able to be utilized for water transmission line between treatment plant and distribution reservoir. Construction of double pipeline was thought to increase capital cost, which can be an issue to waterworks authorities. Reducing capital cost was possible by means of installing connectors between two parallel pipelines because of reduced diameter of each pipe. To obtain optimal design condition for connectors, it was necessary to compare water pressure according to accident location, to investigate flow according to connection pipe spacing, connection pipe diameter, and aging of pipe. Reliable and economical connection layouts were determined based on these results. The cost estimation for each design condition was carried out. Cost was approximately reduced by 20 ~ 30 % compared to the double pipeline without connections. In addition to this, connection between double pipelines could expect extra benefits for maintenance since the pipe could be repaired and rehabilitated without interruption.

• 한국기계가공학회지
• /
• 제5권4호
• /
• pp.7-12
• /
• 2006

Galvanized steel pipe, copper pipe and stainless steel pipe, which is being used in waterworks piping materials. In case of galvanized steel pipe, the precipitation of a product is being generated due to the pollution of the tap water, a white water phenomenon, and various corrosion reaction because a zinc ion is melted by tap water. And in case of a cupper pipe, many problems which is harm in sanitation appeared because of a inflow of harmfulness substance by a frequent accident of a water leakage. So, to prevent these problems, it is substituted for stainless steel pipe. However, those problems is still occurring because of badness of welding, a problem of a water leakage in connection part, and a increment of construction expenses. Therefore, this research has examined the laying period according to each piping thickness and a corrosion shape according to each laying depth after laying in various soils(sandy loam, loamy, clay loam, clay) using galvanized steel pipe, copper pipe, and stainless steel pipe. That is, we has studied the data which is necessary for a rational method of preserving the quality of water by examining the corrosion properties of piping materials in the soil environment which waterworks piping materials is being used.

• Journal of the korean society of oceanography
• /
• 제33권4호
• /
• pp.168-177
• /
• 1998

Five and a half months after the Keumdong oil spill accident on the 21$^{st}$ of September 1993, 34 seawater samples and 94 sediment samples were collected from Kwangyang Bay and Namhaedo area to assess its environmental impacts. Hydrocarbon concentration in the seawater ranged from 0.8 to 9.2 ${\mu}$g/1 with an average of 3.3 ${\mu}$g/1. This average value was nearly the same as the value(3.7 ${\mu}$g/1) before the oil spill accident. This suggests that by the early March of 1994 majority of the coastal water in the study area restored to its background hydrocarbon concentration before the oil spill accident. Nutrients, heavy metals and other general environmental parameters of the seawater did not show any aggravated seawater quality compared with the previous records. From the regression analysis of time-course observation of hydrocarbon in the seawater, except the sediment environment, the effect of oil spill on the water column was estimated to last at least 4 months in the study area after the oil spill accident. In the shoreline sediments, oil deposits were, however, still found at the high water marks at several stations, and very high values were found in the west of Namhaedo, ranging from 3.7 to 40.1 mg/g of wet sediment. Gas chromatography of these samples showed a very distinct Bunker C chromatogram identical to the Keumdong oil spill. Hydrocarbons in the subtidal bottom sediments in the study area and the reference stations (YB and CB) ranged from 0.45 to 18.08 ${\mu}$g/g of wet sediment with an average of 3.09 ${\mu}$g/g. West of Namhaedo (Stations Bl2-B33) generally showed much higher values than inner Kwangyang Bay and in Chinju Bay. Chinju Bay generally showed the lowest value among the study area. Subtidal bottom sediments in inner Kwangyang Bay and Chinju Bay seemed to be less affected than west of Namhaedo. Heavy metal concentrations in the sediment were relatively higher in the Kwangyang Bay than in the Chinju Bay. However, metal concentrations in the study area were in general comparable to the reference areas.

• 상하수도학회지
• /
• 제31권1호
• /
• pp.1-6
• /
• 2017

Surge pressure is created by rapid change of flow rate due to operation of hydraulic component or accident of pipeline. Proper control of surge pressure in distribution system is important because it can damage pipeline and may have the potential to degrade water quality by pipe leakage due to surge pressure. Surge relief valve(SRV) is one of the most widely used devices and it is important to determine proper parameters for SRV's installation and operation. In this research, determining optimum parameters affecting performance of the SRV were investigated. We proposed the methodology for finding combination of parameters for best performance of the SRV. Therefore, the objective function for evaluate fitness of candidate parameters and surge pressure simulation software was developed to validate proposed parameters for SRV. The developed software was integrated into genetic algorithm(GA) to find best combination of parameters.

• 환경위생공학
• /
• 제10권1호
• /
• pp.1-11
• /
• 1995

We had passed through a serious water pollution with a rapid urbanization and industrialization in the 1960's. Seoul Chunggyechun Sewage Disposal System set uP in 1966 and finished in 1976, as the first sewage disposal system in Korea, had covered only 4 percentage of the sewage disposal system per capita for 10 years. Through holding the Asian Games in 1986 and the Olympic Games in 1988, we expanded the sewage disposal system so that it became increased 18 percentage of the population in 1986. Finally, we have installed about 60 sewage disposal system by 1994 for a large environmental investment which was critically caused by "Phenol Accident in Nakdong River" . Now, the sewage disposal system per capita covers 42 percentage and the activity for water quality improvement is going on rapidly. The method of sewage disposal is mainly "activated sludge process" . However, the technical ability for the sewage disposal has largely developed since 1991 so the "extended aeration process" is used in Po$\v{u}$n, Tangyang, Mun$\v{u}$i, "rotating biological contact process" in Onch$\v{u}$ng, Pukok, and "oxidation ditch process" in K$\v{o}$ch'ana.

• 한국수자원학회논문집
• /
• 제31권1호
• /
• pp.85-93
• /
• 1998

본 연구는 도시하천인 한강 하류부에 2차원 유한요소모형을 적용하여 하천의 수리학적 특성에 따른 오염물질의 거동특성을 모의하고 예측하기 위한 것으로서 흐름상태를 분석할 수 있는 RMA-2V 모형과 동적 수질예측이 가능한 RMA-4모형을 이용하였다. 2차원 유한요소모형을 사용하여 수질의 거동특성을 모의하여 본 결과 유량 및 유속의 변화는 오염물질의 이송확산에 큰 영향을 미치는 것으로 나타났으며, 탄천 및 중랑천은 대상구역내의 수질오염에 큰 영향을 미치는 것으로 나타났다. 불시의 오염사고가 발생했을 때 오염물질이 하류부로 이동함에 따라 최대 COD 값은 감소하고,오염물질이 영향을 미치는 지속기간은 커지는 것을 알 수 있었고, 전체적으로 좌·우안의 오염물질의 농도차가 크게 나타났으며, 이로써 한강과 같은 대하천의 경우 실시간 예측시 2차원 해석이 필요한 것으로 나타났다.

• 산업경영시스템학회지
• /
• 제46권3호
• /
• pp.285-292
• /
• 2023

As various accidents have occurred in underground spaces, we aim to improve the quality validation standards and methods as specified in the Regulations on Producing Integrated Map of Underground Spaces devised by the Ministry of Land, Infrastructure and Transport of the Republic of Korea for a high-quality integrated map of underground spaces. Specifically, we propose measures to improve the quality assurance of pipeline-type underground facilities, the so-called life lines given their importance for citizens' daily activities and their highest risk of accident among the 16 types of underground facilities. After implementing quality validation software based on the developed quality validation standards, the adequacy of the validation standards was demonstrated by testing using data from two-dimensional water supply facilities in some areas of Busan, Korea. This paper has great significance in that it has laid the foundation for reducing the time and manpower required for data quality inspection and improving data quality reliability by improving current quality validation standards and developing technologies that can automatically extract errors through software.

• Nuclear Engineering and Technology
• /
• 제45권7호
• /
• pp.871-894
• /
• 2013

KAERI (Korea Atomic Energy Research Institute) has been operating an integral effect test facility, the Advanced Thermal-Hydraulic Test Loop for Accident Simulation (ATLAS), for transient and accident simulations of advanced pressurized water reactors (PWRs). Using ATLAS, a high-quality integral effect test database has been established for major design basis accidents of the APR1400 plant. A Domestic Standard Problem (DSP) exercise using the ATLAS database was promoted to transfer the database to domestic nuclear industries and contribute to improving a safety analysis methodology for PWRs. This $2^{nd}$ ATLAS DSP (DSP-02) exercise aims at an effective utilization of an integral effect database obtained from ATLAS, the establishment of a cooperation framework among the domestic nuclear industry, a better understanding of the thermal hydraulic phenomena, and an investigation into the possible limitation of the existing best-estimate safety analysis codes. A small break loss of coolant accident with a 6-inch break at the cold leg was determined as a target scenario by considering its technical importance and by incorporating interests from participants. This DSP exercise was performed in an open calculation environment where the integral effect test data was open to participants prior to the code calculations. This paper includes major information of the DSP-02 exercise as well as comparison results between the calculations and the experimental data.

• 방사성폐기물학회지
• /
• 제17권2호
• /
• pp.235-243
• /
• 2019

원자력 사고 후 대기로 누출된 방사성물질이 지표 토양내 침적된 후 강우에 의하여 주변 환경으로 이동하여 지표수계를 오염시킨다. 지표 토양내 침적된 방사성핵종의 거동 평가를 위하여 수립된 지표 수계 및 토양 유실 모델의 주요 입력자료를 수집하여 분석하였다. 월성 원전이 위치한 낙동강권역의 하천과 호수에서의 물리적 특성과 주요 생물상의 변화를 파악하기 위해서 원전 주변 수생 환경의 조사 및 분석을 수행하였다. 이를 위해 국내 여러 기관에서 제공하는 수치지도, 수문자료, 수질 및 생태환경자료 등을 수집 분석하여 자료간 상호 연계성을 갖도록 체계적인 DB를 구축하였다. 구축된 수생환경 자료는 지표수계에 흡착된 방사성물질의 중장기 거동 평가를 위하여 수립된 지표수계 유동, 토사유실 및 생태계 모델의 기본 입력자료로 제공되어 종합적인 방사선영향평가에 활용될 예정이다.