• 한국정밀공학회지
• /
• 제18권3호
• /
• pp.53-60
• /
• 2001

Water jet cutting is a new technology using very high pressure water as a cutting tool. Water jet cutting system consists of water preparation part, pressure generation pate, cutting head, and motion part. A PC-based numerical controlled (PC-NC) X-Y table is developed and water get cutting system is installed thereon. Water jet machining is applicable to various kinds of materials ranging from soft materials such as rubber and meat to hard-to-cut materials such as titanium. This paper shows the application of the abrasive waterjet system to titanium cutting.

• 대한화학회지
• /
• 제4권1호
• /
• pp.51-57
• /
• 1957

Hydroquinone-formaldehyde resin prepared from hydroquinone, formaldehyde and hydrochloric acid as a catalyst was shown to be oxidized with ferric chloride solution and regenerated by stannous chloride solution. The influence of various conditions of preparation on the capacity of oxidation was studied. Results show that the concentration of a solution of hydroquinone has not any effects below 14 parts of water to 1 part of hydroquinone, by the after-heat-treatment for 5-6 hours at 100-120 deg. C. the capacity of oxidation is exhibited a maximum, and decreased as the mole ratio of hydroquinone to formaldehyde increase. The optimum conditions for the preparation of this resin are as follows: hydroquinone 1 part to distilled water 10 parts, mole ratio of formaldehyde 1.2 to hydroquinone 1, and 5 hours of after-heat-treatment at 120 deg. C. The maximum capacity under the above conditions is 13.99 meq/g-ersin.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권3호
• /
• pp.11-22
• /
• 2013

SEAWAT, a linked modeling program of Visual MODFLOW was used to analyze the change in groundwater levels and salinity related groundwater dam construction in Cheongsan island, Wando-Gun, Jeollanam-Do. The steady-state model results show the groundwater flow and salinity distribution of the studied area. The groundwater flows from north-west and south-east highlands into the river, located in the middle part of the basin, and is eventually discharged to the ocean. Part of the sea water infiltrates into the river; and through the estuary's alluvium aquifer, the sea water intrusion takes place spreading to about 830 m from the ocean. The transient model results show that after the groundwater dam construction, groundwater levels will rise to a maximum of 2.0 m upstream, and the groundwater storage will increase 21,000 after 10 years. Meanwhile 31% of the total area affected by sea water intrusion will decrease. To conclude, the groundwater dam is a very useful method for a secure water resource in preparation for drought and water shortages in the island regions.

• Journal of Ginseng Research
• /
• 제6권2호
• /
• pp.168-203
• /
• 1982

Effects of soil moisture on growth of Panax ginseng, of various factors on soil moisture, and of moisture on nutrition, quality, physiological disorder, diseases and insect damage were reviewed. Optimum soil moisture was 32% of field capacity with sand during seed dehiscence, and 55-65% for plant growth in the fields. Optimum soil moisture content for growth was higher for aerial part than for root and higher for width than for length. Soil factors for high yield in ginseng fields appeared to be organic matter, silt, clay, agreggation, and porosity that contributed more to water holding capacity than rain fall did, and to drainage. Most practices for field preparation aimed to control soil moisture rather than nutrients and pathogens. Light intensity was a primary factor affecting soil moisture content through evaporation. Straw mulching was best for the increase of soil moisture especially in rear side of bed. Translocation to aerial part was inhibited by water stress in order of Mg, p, Ca, N an Mn while accelerated in order of Fe, Zn and K. Most physiological disorders(leaf yellowing, early leaf fall, papery leaf spot, root reddening, root scab, root cracking, root dormancy) and quality factors were mainly related to water stress. Most critical diseases were due to stress, excess and variation of soil water, and heavy rain fall. The role of water should be studied in multidiciplinary, especially in physiology and pathology.

• 한국환경독성학회:학술대회논문집
• /
• 한국환경독성학회 2003년도 추계국제학술대회
• /
• pp.149-149
• /
• 2003

A new technique is proposed for the determination of alkylphenols, chlorophenols and bisphenol A in tap water. The sample preparation consists of a solid phase extraction (SPE) of alkylphenols, chlorophenols and bisphenol A from a water sample with XAD-4 and subsequent conversion to isobutyloxycarbonyl (isoBOC) derivatives or tert.-butyldimethylsilyl (TBDMS) derivatives for sensitive analysis with the GC/MS-SIM mode. The recoveries were 86.6∼105.2 % (isoBOC derivatization) and 97.6∼484.5 % (TBDMS derivatization), respectively. The limit of quantitation of alkylphenols, chlorophenols and bisphenol A for SIM were 0.001∼0.050 $\mu\textrm{g}$/l (isoBOC derivatization) and 0.003∼0.050 $\mu\textrm{g}$/l (TBDMS derivatization). The SIM responses were linear with the correlation coefficient varying 0.9755∼0.9981 (isoBOC derivatization), and 0.9908∼0.9996 (TBDMS derivatization). The derivative methods and their application to tap water samples will be disscussed.

• 한국가정과교육학회지
• /
• 제11권1호
• /
• pp.25-45
• /
• 1999

Home economics is a very important part of high school curriculum. The goal of home economics is to enable the students to get necessary knowledge and skills of household affaires, so they can manage their household tasks easily. This study was investigated to know the present condition of high school food preparation classes and evaluation method and to find out the problems related to the evaluation. Ninety four teachers from Kyoung-Ki province answered the questionnaire. The results are as follows： They though that the most appropriate food preparation classes should be at least 4-6 in a year. But in practice they only had 1-2 classes because of the time and budget. Because most of the teachers wanted the students to apply their knowledge to real life, they mainly chose Korean foods instead of western foods. It may help the students understand the Korean traditional food. Most of the schools needed additional gas oven ranges, microwave ovens and water purifiers. Most teachers(87.50%) evaluated the students in groups. This was due to limited time and lack of objective evaluation methods. So it is suggested that the Ministry of Education must make the measure of objective evaluation and allot more home economics hours at high school curriculum.

• Nuclear Engineering and Technology
• /
• 제42권5호
• /
• pp.500-519
• /
• 2010

AEGIS is a lattice physics code incorporating the latest advances in lattice physics computation, innovative calculation models and efficient numerical algorithms and is mainly used for light water reactor analyses. Though the primary objective of the AEGIS code is the preparation of a cross section set for SCOPE2 that is a three-dimensional pin-by-pin core analysis code, the AEGIS code can handle not only a fuel assembly but also multi-assemblies and a whole core geometry in two-dimensional geometry. The present paper summarizes the major calculation models and part of the verification/validation efforts related to the AEGIS code.

• 한국식품영양과학회지
• /
• 제31권2호
• /
• pp.343-350
• /
• 2002

문헌과 실제 공장에서 채택하고 있는 된장의 제조방법을 조사하여 재래식과 개량식 방법으로 나누어 각 단계별로 표준화하였다. 재래식 된장 제조는 먼저 재래식 메주 제조로 시작되는데 재래식 메주는 자연발효로 대두를 증자하고 분쇄하여 벽돌형의 메주를 성형 한다. 이를 건조시킨 후 볏짚으로 엮어 매달아 2~3개월간 발효시켜 메주를 제조한다. 발효가 끝난 메주는 소금물에 띄우고(meju : salt : water = 18.4 : 14.6 : 67.0) 고추, 숯을 넣어 2~3개월 발효 숙성하고 된장과 간장을 분리한다. 이를 다소 수정하여 콩알메주를 만들어 재래된장을 만들기도 하는데, 증자대두에 Asp. oryzae를 접종하여 기존B. subtilis와 함께 콩알 메주를 제조하여 염수와 함께 6개월 정도 발효 숙성하여 콩알메주 재래된장을 제조 한다. 한편 개량 된장 제조방법은 기본적으로 일본식을 따르는데 재래식과 일본식을 수정한 방법을 선택하고 있다. 증자된 소맥분에 Asp. oryzae로 제국을 하고 증자된 대두를 혼합 한다. 이때 전분질원으로 증자된 밀쌀을 첨가하기도 하고 재래식 된장의 맛을 주기 위해 증자대두에 B. subtilis를 접종하여 발효시킨 메주 또는 재래식 메주를 혼합하기도 한다. 혼합된 소맥제국과 증자대두 등에 염수를 첨가하여 45~60일 발효숙성하고 살균($65^{\circ}C$, 30분) 과정을 거치고 제품화한다. 이제는 한국의 재래식과 재래 된장 맛을 포함하여 기능성이 우수한 한국의 된장을 만들기 위해 기존 장류 공장은 재래 된장의 제조 방법을 공정에 사용할 필요가 있으며 이를 이용하여 일본 미소와는 완전히 다르면서 한국 전통적인 된장 제조법을 개발하여 수출 및 세계화를 이를 필요가 있다. 따라서 재래식 된장 공장은 재래식 방법을 좀더 과학화 및 산업화하여 전통을 이어가며 안전성 확보와 일정한 맛과 기능성이 우수한 재래 된장을 제조해야 한다. 현대의 실정 에 맞는 과학적 제조방법을 이용하여 산업화한다면 재래식으로 인해 걸리는 시간, 노력 에 걸맞은 가격, 품질 등을 유지해 나갈 수 있으리라 본다.

• Environmental Analysis Health and Toxicology
• /
• 제18권3호
• /
• pp.199-208
• /
• 2003

A new technique was proposed for the determination of alkylphenols, chlorophenols and bisphenol A in tap water samples. The sample preparation consists of a solid phase extraction (SPE) of alkylphenols, chlorophenols and bisphenol A from a water sample with XAD-4 and subsequent conversion to isobutyloxycarbonyl (isoBOC) derivatives or tert-butyldimethylsilyl (TBDMS) derivatives for sensitive analysis with the CC/MS SIM mode. The recoveries were 86.6 ∼ 105.2％ (isoBOC derivatization) and 97.6∼484.5％ (TBDMS derivatization), respectively. The limit of quantitation of alkylphenols, chlorophenols and bisphenol h for SIM were 0.001∼0.050 $\mu\textrm{g}$/1 (isoBOC derivatization) and 0.003∼0.050 $\mu\textrm{g}$/1 (TBDMS derivatization). The SIM responses were linear with the correlation coefficient varying 0.9755∼0.9981 (isoBOC derivatization), and 0.9908∼0.9996 (TBDMS derivatization). When these methods were applied to tap water samples, the range of concentrations were 22.8∼31.3 ng/1 in 2,4-dichlorophenol, 28.6∼70.3 ng/1 in pentachlorophenol, 15.2∼17.4 ng/1 in t-butylphenol, 10.8∼13.2 ng/1 in t-octylphenol and 17.6∼36.3 ng/l in bisphenol A, respectively.

• 한국수처리학회지
• /
• 제26권6호
• /
• pp.117-124
• /
• 2018

For the effective removal of phosphorus in water, a novel type of composite was prepared by combining Poly Alumiun Chloride, widely used in sewage/wastewater treatment plants, and Humic Acid particles, which are known to have phosphorus removal ability, with CI. The surface of the ferromagnetic CI particles was oxidized and activated, and then PAC and HA were synthesized to finally produce CIPAC and CIHA. CIPAC and CIHA prepared by this study showed similar results to the phosphorus removal efficiencies of PAC and HA coagulants. The novel composite has a larger weight than the conventional coagulant, and the coagulated sludge precipitates rapidly. The sludge could be easily separated in a short time if the external magnetic field was given by the ferromagnetic force of CIPAC and CIHA prepared with CI as support. Therefore, it can be concluded that if phosphorus removal is carried out using CIPAC and CIHA prepared through this study with external magnetic field, the sedimentation rate will be much faster than that of conventional coagulant. Thus it is possible to obtain a high economic benefit in the sludge recovery part.