• 한국해양공학회지
• /
• 제18권3호
• /
• pp.1-7
• /
• 2004

Flaw visualization and velocity field measurement methods have practical applications in the various fluid engineering fields, such as mechanics, ships, and heat fluids. In this study, the basic principles and theoretical methods are used to establish an application technique of Particle Imae Velocimetry(abbreviated to PIV below). Accordingly, the measured results of velocity field distribution of a section inside the Circulating Water Channel (abbreviated to CWC below) are computed using the PIV is presented. The uniformity of velocity distribution of the section in CWC is confirmed, by comparing this PIV data with the existing current meter data. Also, in order to measure the flaw fields of surroundings of 2-dimensional cylinder in the CWC, the flaw visualization technique using the PIV is applied.

• 한국수자원학회논문집
• /
• 제43권2호
• /
• pp.153-165
• /
• 2010

Large-Scale Particle Image Velocimetry (LSPIV)는 Particle Image Velocimetry (PIV)를 실험실내의 비교적 규모가 큰 흐름이나 하천에서의 표면유속장의 측정 등 넓은 영역에 적용할 수 있도록 확장시킨 것이다. LSPIV는 PIV의 구성요소를 포함하여 추적자 투하, 조명, 촬영, 이미지 변환, 이미지 처리 및 후처리의 여섯 단계로 구성된다. 본 연구에서는 LSPIV의 모바일 버전인 MLSPIV를 이용하여 하천에서의 유속측정시 각 단계별로 발생가능한 오차성분을 정의하였고, 기존의 연구 결과를 바탕으로 오차의 영향이 정량적으로 밝혀진 것을 정리하였다. 각 단계별로 오차 발생요인을 조사한 결과 27개의 성분오차성분을 파악하였다. 이중에서 5개의 오차요소는 기존에 연구가 진행되었고, 7개의 오차요소는 본 논문에서 적용시의 MLSPIV에는 그 효과가 미치지 않는 것으로 파악하였다. 나머지 15개의 오차성분 중 4가지 오차성분- 샘플링시간, 이미지 해상도, 추적자의 성질, 바람-에 대해서 유속산정시 미치는 영향을 파악하기 위하여 개수로 실험장치를 이용한 실내시험을 실시하였다. 이미지 프로세싱에 이용한 이미지수로부터 나타나는 유속계산 오차를 조사한 결과 이미지의 개수가 50매 이상인 경우는 이로 인한 오차가 1 % 이하로 감소함을 파악하였다. 촬영된 이미지의 해상도가 유속계산시 미치는 영향을 조사하기 위해 세 가지 이미지 해상도로 변화시키면서 유속측정 오차를 분석한 결과 저해상도의 이미지를 이용한 경우 고해상도 이미지를 이용한 경우와 비교하여 3 % 가량의 차이를 나타내었다. 추적자의 성질과 바람의 영향에 대해서는 흐름의 평균유속이 큰 경우에는 바람이 추적자에 마치는 영향이 현격히 줄어듬을 보이고 있다. 즉, 유속이 증가함에 따라 바람의 영향은 감소하나, 바람의 영향을 최소화시키기 위해서는 가급적 비중이 큰 물질(0.5

• 한국지반공학회논문집
• /
• 제31권11호
• /
• pp.49-60
• /
• 2015

개방수역 퇴적물 처리는 해안공사에서 다양한 목적으로 수행되고 있다. 매립토의 거동은 수중 침강단계와 하상 퇴적단계로 구분하여 해석을 수행하였으며, 이를 이용하여 매립토의 수중 투기에 의한 유보율을 평가하였다. 매립토 입자의 침강단계는 thermal 단계와 swarm 단계로 구분하여 입자구름의 침강속도와 환산 반경에 대한 일반화된 방정식을 제시하였다. 하상 퇴적단계는 개발된 프로그램을 이용하여 매립토의 마찰각과 유속의 변화에 따른 퇴적형상의 성장계수를 평가하였다. 유보율은 매립토의 해수면 위의 투기지점을 원의 중심으로 하고 원의 유효 반경내에 잔류하는 매립토의 질량비로 정의하였다. 싱가포르 현장을 기준으로 수심을 20m, 유속은 0.0-1.5m/s 구간에서 유효반경 5m에 대한 유보율도를 제시하였다. 이는 해안 매립공사에서 매립토의 유실율을 저감하여 시공성을 개선하고 주변환경오염을 최소화하는 자료로 활용될 수 있다.

• 상하수도학회지
• /
• 제23권1호
• /
• pp.121-128
• /
• 2009

Objectives of this study were to investigate influencing factors of detention time, particle size distribution, and filter medium characteristics for waterworks sludge dewatering. The stepped pressure filtration was carried out with lab scale apparatus and the filter press pilot test for dewatering was conducted at the water treatment plant. Effects of filter medium and polymer dose were examined through observing water content and dewatering velocity and cyclic dewatering rate with filter press pilot test. Relationships among detention time, particle size distribution and filtration resistance were analyzed. Prolongation of sludge detention time was found to cause blinding phenomenon in cake and filter medium and to decrease dewatering process efficiency. The average specific resistance increased according to detention time. In pilot test of dewatering for thickened sludge with Nylon Multi-NY840D and Nylon Mono-100% filter media, dewatering velocities were 0.92 and $0.93kg\;DS/m^2{\cdot}hr$ according to 0.1% polymer dose of dried solids weight base. And cyclic dewatering rates were 2.45 and $2.50kg\;DS/m^2{\cdot}cycle$ cycle for the Nylon Multi-NY840D and Nylon Mono-100% media. Dewatering velocity of polymer dosed sludge was observed to be higher than that of non-polymer sludge.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권6호
• /
• pp.965-974
• /
• 2009

The current study reviews the formula used to calculate the stability of an artificial reef in the breaking wave zone of coastal waters. A comparison was carried out between the existing formula and a new formula that takes into account the water particle velocity in the breaking wave zone. Water particle velocity was analyzed using the Fluent (CADMAS-SURF) software program. The new formula took into various factors, including the difference in the drag coefficient due to the direction of the current and the ratio of distance between two reefs. The drag coefficient of the artificial reef due to the direction of the current was 0.84 when the distance ratio was 0.5. When the artificial reef was placed at 45 degree angle to the current, the product of the drag coefficient and the project area were 40 to 46 % greater than when the reef was placed at 90 degree angle. Our results regarding the stability of an artificial reef indicate that the new formula provides the designers of artificial reefs with a more rational and economic design rationale rather than the existing formula.

• 상하수도학회지
• /
• 제18권5호
• /
• pp.673-679
• /
• 2004

Particle breakthrough can occur by either the breakoff of previously captured particles (or flocs) or the direct passage of some influent particles through the filter. Filtration experiments were performed in a laboratory-scale filter using spherical glass beads with a diameter of 0.55 mm as collectors. A single type of particle suspension (Min-U-Sil 5, nearly pure $SiO_2$) and three different destabilization methods (pH control, alum and polymer destabilization) were utilized. The operating conditions were similar to those of standard media filtration practice: a filtration velocity of 5 m/h. To assess the possibility of particle detachment during the normal filtration, a hydraulic shock load (20% increase of flow rate) was applied after 4 hours of normal filtration. The magnitude of particle detachment was proportional to the particle size for non-Brownian particles. At the same time, less favorable particles, i.e., particles with larger surface charge, were easily detached during the hydraulic shock load. Therefore, proper particle destabilization before filtration is crucial for maximum particle removal as well as minimum particle breakthrough.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2007년도 추계학술대회
• /
• pp.116-118
• /
• 2007

Three-dimensional (3D) velocity field information of a laminar flow in a curved micro tube of circular cross-section has been measured using a digital micro holographic particle tracking velocimetry (HPTV). The temporal evolution of instantaneous velocity field of a water flow in a curved micro tube of $100\;{\mu}\;m$ and $300\;{\mu}\;m$ in inner diameter was obtained. The 3D mean velocity field distribution was obtained quantitatively by statistical-averaging of instantaneous velocity fields. At low Dean number (De), a secondary flow was not generated in the curved tube. With increasing Dean number, the secondary flow constituted of two large-scale counter-rotating vortices was formed due to enhanced centrifugal force. To reveal the flow characteristics of high Dean numbers, trajectories of fluid particles were evaluated experimentally from the 3D velocity fields data measured by the HPTV technique. The present experimental results, especially the 3D particle trajectories, would be helpful to design and to understand the mixing phenomena in 3D curved passages of various curved micro-tubes or micro-channels.

• 상하수도학회지
• /
• 제20권2호
• /
• pp.295-302
• /
• 2006

Over the past decades, a flocculation and/or sedimentation process have been adopted to remove pollutants from CSOs. It has been learned that major factors affecting settlement of pollutants are the particle size distribution, their settling velocities and their specific gravity. It is, therefore, a good idea to analyze the particle size distribution and settleability of CSOs pollutants in order to develop details in designing a process. Discussed in this study are pollutant characteristics of CSOs such as particle size distribution and settleability of pollutants. The power law function is applied and is found to be an effective and reliable index for expressing the particle size distribution of pollutants in CSOs. Based on the regression analysis it is observed that the derived constants of curves representing settling velocity profile are proportional to the initial concentration of particles and to the ${\beta}$-values of power law distributions.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.393-398
• /
• 2005

부유된 광물성 미립자는 강, 저수지 그리고 호수의 유속 및 운송력이 감소하는 곳에서 침전되며, 다른 중금속들에 의해 오염된다. 그 실예들이 퇴적물의 준설, 수질오염, 운하 및 수공구조물의 유지관리의 문제이다. 이런 침전 문제들을 다루기 위해선 물에 녹아있는 이온(NaOH, HCl, NaCl)의 첨가 및 밀도의 변화 아래 점착성 퇴적물의 물리-화학적인 특성의 이해가 필요하다. 왜냐하면 미립자인 점착성 퇴적물은 물리-화학적인 영향 때문에 쉽게 응집현상이 일어나며, 다른 특성을 갖게 되기 때문이다. 본 실험은 광물성 미립자(alumina 와 Quartz)를 가지고 담수 및 염분을 함유한 침강수주 안에서 실시되었다. 정수 중에 부유된 미립자의 침강속도는 압력센서(최대 10 mbar)로 측정되었다. 초기 농도 20,000 mg/l)까지 quartz의 침강 속도는 증가하였으며, 그 후 감소하였다. Quartz의 침강 속도는 산성에서 강한 응집현상 때문에 증가하였으며 알칼리성에서는 낮게 측정되었다. 그러나 alumina의 침강 속도는 그 정반대의 현상을 보였다.

• Nuclear Engineering and Technology
• /
• 제38권8호
• /
• pp.763-778
• /
• 2006

Injection of microbubbles within the turbulent boundary layer has been investigated for several years as a method to achieve drag reduction. However, the physical mechanism of this phenomenon is not yet fully understood. Experiments in a channel flow for single phase (water) and two phase (water and microbubbles) flows with various void fraction values are studied for a Reynolds number of 5128 based on the half height of the channel and bulk velocity. The state-of-the art Particle Tracking Velocimetry (PTV) measurement technique is used to measure the instantaneous full-field velocity components. Comparisons between turbulent statistical quantities with various values of local void fraction are presented to elucidate the influence of the microbubbles presence within the boundary layer. A decrease in the Reynolds stress distribution and turbulence production is obtained with the increase of microbubble concentration. The results obtained indicate a decorrelation of the streamwise and normal fluctuating velocities when microbubbles are injected within the boundary layer.