• Journal of Korean Medicine Rehabilitation
• /
• v.20 no.4
• /
• pp.73-81
• /
• 2010

Objectives : The purpose of this study is to establish literatural evidence about thermotherapy and cryotherapy for Korean medicine through literatural review. Methods : Applicable paragraphs which were related to the thermotherapy and cryotherapy of cutaneous and muscle meridian were phrased from in "Yibujicheng(醫部集成) and "Dongyibaojian(東醫寶鑑)" where were archiving of Oriental or Korean medicine literatures. Searched paragraphs were analysed for establishing historical and theoretical bases of thermotherapy and cryotherapy in Korean medicine. Results : Thermotherapy of cutaneous and muscle meridian(經皮經筋溫熱療法) such as hot pack, warm water therapy, paraffin bath, ultrasound is originated from yu(慰) warm water(溫水) hot water(熱水). Matching indications are various pain conditions(caused by coldness(寒), hard-work(僗若), extravasated blood(瘀血), inflammatory skin disease, frostbite and several internal diseases. It also treats gynecological diseases and facial palsy. Diathermic therapy on acupuncture points(穴位照射溫熱療法) such as infra-red, microwave, shortwave is originated from huolu(火爐), wenlu(溫爐), xianglu(香爐), lamp light(燈火). Its objective is to improve the effects of herb medicine by aiding sweating or to treat the residual symptoms of fever disease or to care skin disease and pain from bone fracture, contusion. Cryotherapy of cutaneous and muscle meridian(經皮經筋溫寒冷療法) such as ice pack, ice spray, iced whirpool, cool water bath is originated from lengfu(冷敷), lengtie(冷貼), lengshiyu(冷石熨). Matching indications are contusions, animal bite injury, corn(肉刺) and (淋病), eye disease, nasal bleeding, hemorrhoid, inflammatory skin disease and chicken pox. Conclusions : Thermotherapy and cryotherapy of cutaneous and muscle meridian(經皮經筋溫冷療法) are the treatments which were used in Korean medicine from the ancient Korean medicine. As scientific equipments were originated from yu(慰), huolu(火爐), wenlu(溫爐), xianglu(香爐), lamp light(燈火). lengfu(冷敷), lengtie(冷貼), lengshiyu(冷石熨). It can be said that these are elements of Korean medicine. More rigorous studies are needed to establish clinical evidence about not only thermotherapy and cryotherapy but also the other physiotherapy of Korean medicine.

• Environmental and Resource Economics Review
• /
• v.24 no.1
• /
• pp.165-187
• /
• 2015

In this paper, we tested if the sewage subsidy from Korean Water Management Fund discourage sewage fee increase by Korean local governments, and consequently hinder water quality improvement. To examine this counter-incentive effect of Water manage Fund sewage subsidy, we estimated the effect of sewage subsidy on the ratio of sewage fee revenue to environmental treatment facilities' operation cost of local governments in 2009-12, using two-stage least square estimation. We found that the sewage subsidy has negative effect on the sewage fee revenue to sewage operation cost ratio. But, the statistical significance of this effect was sensitive to model specification. And the size was too small to conclude that the counter-incentive effect was economically significant.

• Journal of Korean Society of Rural Planning
• /
• v.18 no.2
• /
• pp.69-79
• /
• 2012

This study was carried out to analyze the disparities of basic living infrastructure between Guns(rural counties), and between Eups/Myuns(rural districts) in Jeollanam-do province. For the purpose of this study, dimensions of regional disparity in basic living structure were measured by 3 components ; road, public water service and sewage disposal. By utilizing the published statistics, this study has examined 8 Guns(counties) containing Eup and Myon in Jeollanam-do province which can represent 4 different rural areal types, respectively, i,e. mountainous, semi-mountainous, flat and seashore areas. The data acquisition time of this study is fixed on end of 2009 year in order for possible collections of the most recent published statistics. It presents evidence on the magnitude and evolution of discussion of regional disparities between Guns(counties), and between Eup & Myon, and between Myons in Jeollanam-do province even though infrastructure provision level of Jeollanam-do rural areas are much more improved than the past. Concludingly, the existing disparities in this area is meaningful and so, it should be seriously reconsidered when deciding local government's budget allocation priority.

• Journal of the Korean Society of Tobacco Science
• /
• v.35 no.1
• /
• pp.1-6
• /
• 2013

Near InfraRed Spectroscopy(NIRS) is a quick and accurate analytical method to measure multiple components in tobacco manufacturing process. This study was carried out to develop calibration equation of near infrared spectroscopy for the prediction of the amount of chemical components and hot water solubles(HWS) of reconstituted tobacco leaf. Calibration samples of reconstituted tobacco leaf were collected from every lot produced during one year. The calibration equation was formulated as modified partial least square regression method (MPLS) by analyzing laboratory actual values and mathematically pre-treated spectra. The accuracy of the acquired equation was confirmed with the standard error of prediction(SEP) of chemical components in reconstituted tobacco leaf samples, indicated as coefficient of determination($R^2$) and prediction error of sample unacquainted, followed by the verification of model equation of laboratory actual values and these predicted results. As a result of monitoring, the standard error of prediction(SEP) were 0.25 % for total sugar, 0.03 % for nicotine, 0.03 % for chlorine, 0.16 % for nitrate, and 0.38 % for hot water solubles. The coefficient of determination($R^2$) were 0.98 for total sugar, 0.97 for nicotine, 0.96 for chlorine, 0.98 for nitrate and 0.92 for hot water solubles. Therefore, the NIRS calibration equation can be applicable and reliable for determination of chemical components of reconstituted tobacco leaf, and NIRS analytical method could be used as a rapid and accurate quality control method.

• Nuclear Engineering and Technology
• /
• v.43 no.4
• /
• pp.391-398
• /
• 2011

The U metal chips generated in developing nuclear fuel and a gamma radioisotope shield have been stored under immersion of water in KAERI. When the water of the storing vessels vaporizes or drains due to unexpected leaking, the U metal chips are able to open to air. A new oxidation treatment process was raised for a long time safe storage with concepts of drying under vacuum, evaporating the containing water and organic material with elevating temperature, and oxidizing the uranium metal chips at an appropriate high temperature under conditions of controlling the feeding rate of oxygen gas. In order to optimize the oxidation process the uranium metal chips were completely dried at higher temperature than $300^{\circ}C$ and tested for oxidation at various temperatures, which are $300^{\circ}C$, $400^{\circ}C$, and $500^{\circ}C$. When the oxidation temperature was $400^{\circ}C$, the oxidized sample for 7 hours showed a temperature rise of $60^{\circ}C$ in the self-ignition test. But the oxidized sample for 14 hours revealed a slight temperature rise of $7^{\circ}C$ representing a stable behavior in the self-ignition test. When the temperature was $500^{\circ}C$, the shorter oxidation for 7 hours appeared to be enough because the self-ignition test represented no temperature rise. By using several chemical analyses such as carbon content determination, X-ray deflection (XRD), Infrared spectra (IR) and Thermal gravimetric analysis (TGA) on the oxidation treated samples, the results of self-ignition test of new oxidation treatment process for U metal chip were interpreted and supported.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.24 no.3
• /
• pp.85-98
• /
• 2021

In this study, the characteristics of tree growth and soil environment were analyzed at 5 sites that had been planted on the back slope of dam for more than 15 years in Korea. First, as a result of investigating the growth of 15 trees planted on the back slope of the dam, the average height was 10.6m, diameter at roots was 27.3cm, and DBH was 22.9cm, showing good growth status of most of the trees. In particular, the growth levels of pine, hackberry, and oak were similar or better than those of general forests and artificial ground. As a result of excavating and investigating the roots of trees, horizontal roots grew well in the left and right directions of the back slope of the dam, and the growth of vertical roots was insufficient. Currently, the roots of trees do not directly affect dam safety, but they may continue to grow in the long term and interfere with dam management. Second, the physicochemical characteristics of the soil on the back slope of dam were generally above the intermediate level in terms of landscape design standards, and were similar to those of the domestic forest soil. Therefore, although it was judged to be suitable for plant growth, isolation of the site, soil acidification, and nutrient imbalance may affect tree growth and forest health in the long term. Through this study, it was possible to confirm the potential and applicability of planting area on the back slope of dam as an ecological base. Continuous monitoring is required for safety management and ecological value of dams in the future, and through this, it will be possible to secure the feasibility of planting trees on the slopes of new or existing dams and improving management.

• Geomechanics and Engineering
• /
• v.29 no.3
• /
• pp.281-290
• /
• 2022

The direct shear test is commonly used to evaluate the shear behavior of frozen soil-structure interfaces under normal stress. However, failure criteria, such as the Mohr-Coulomb failure criterion, are needed to obtain the unconfined shear strength. Hence, the punch shear test, which is usually used to estimate the shear strength of rocks without confinement, was examined in this study to directly determine the adfreezing strength. It is measured as the shear strength of the frozen soil-structure interface under unconfined conditions. Different soils of silica sand, field sand, and field clay were prepared inside the steel and concrete ring structures. Soil and ring structures were frozen at the target temperature for more than 24 h. A punch shear test was then conducted. The test results show that the adfreezing strength increased with a decrease in the target temperature and increase in the initial water content, owing to the increase in ice content. The adfreezing strength of field clay was the smallest when compared with the other soil specimens because of the large amount of unfrozen water content. The field sand with the larger normalized roughness showed greater adfreezing strength than the silica sand with a lower normalized roughness. From the experiment and analysis, the applicability of the punch shear test was examined to measure the adfreezing strength of the frozen soil-structure interface. To find a proper sample dimension, supplementary experiments or numerical analysis will be needed in further research.

• Journal of Wetlands Research
• /
• v.23 no.2
• /
• pp.189-200
• /
• 2021

To improve the water quality of agricultural reservoirs, constructed wetlands are applied in many places. These are technologies that establish ecosystems and important design factors include water depth distribution, inflow and outflow, water flow distribution, hydraulic residence time, water quality treatment efficiency, aspect ratio, and the distribution of open water and covered water surfaces. For high efficiency during the operation of a constructed wetland, the design needs to be optimized and this requires consideration of the different types and length of the intake dam as well as the type and connection of wetland cells. Therefore, this study was conducted to investigate and suggest factors that needs to be considered during the design and for efficient operation measures through field surveys of 23 constructed wetlands that have been established and operated in agricultural reservoirs. Results of the field investigation shows that several sites were being operated improperly due to the malfunctioning or failure of the water level sensors, sedimentation in the intake dam, and clogging of the mechanical sluice frames. In addition, it was found that as the length of the inlet channel increases, the ecological disconnection between the intake dam upstream and the wetland outlet downstream also increases and was identified as a problem. Most of the wetlands are composed of 2 to 5 cells which can result to poor hydraulic efficiency and difficulty in management if they are too large. Moreover, it was found that the flow through a small wetland can be inadequate when there are too many cells due to excessive amounts of headloss.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.538-543
• /
• 2008

Urban development and industrialization cause many problems on urban environment such as climate changes, natural disasters and a decreasing number of species. Problems on urban environment are the main factor of that lower the quality of life and obstruct continual development. As a result, eco space becomes the important part of a urban planning. This research, building plan U-Eco city which is establishing with the clean environment and high technology for solve the development thoughtless for the city environment problem and ecological problem. We suggest U-Eco space system which accreted with Ubiquitous technology to three physical divisions, which are lithosphere (land), hydrosphere (water), and aerosphere (air), that interact with the whole biosphere by forming the system. It has composed with U-Green belt that corresponds to lithosphere, U-Blue belt that is applicable to hydrosphere, and U-White belt that comes under aerosphere.

• Journal of the Korean Society of Visualization
• /
• v.15 no.2
• /
• pp.48-58
• /
• 2017

To analyze bubbles generated by an ABB (Air Bubble Barrier), we developed image processing procedure and statistical analysis method. Air was discharged from 5 mm nozzle as swarm form at the bottom of 1 m3 water tank. Flow rates of discharged air are ranged from 2 L/min to 20 L/min and these are corresponding to Reynolds number of 1766-17663. Rise velocity of bubble is extracted by using image process pretending intrusive method. Mean equivalent velocity was calculated using void fraction weighting factor. Bubble diameter is obtained and compared with correlations in the literature. Also, we present a correlation according to the result of this study. Mean velocity and mean diameter of bubbles increase with increasing gas Reynolds number. But these parameters show an asymptotic trend when they approach to high Reynolds number.