• Korean Journal of Food Science and Technology
• /
• v.35 no.6
• /
• pp.1193-1198
• /
• 2003

The effects of preferment levels prepared with lactic acid bacteria isolated from kimchi on the quality of white pan bread were studied. The aim was to investigate how preferment influenced the baking-technological, textural, and sensory properties of white pan bread. During the process of making white pan bread, the pH decreased as the preferment levels increased, whereas the titratable acidity increased. The loaf specific volume increased from 4.66 to $5.59\;cm^3/g$ as preferment content increased from $10%{\sim}25%$. The moisture content and water activity of the bread ranged from 40.77 to 41.49%, and 0.961 to 0.966, respectively, indicating that no appreciable differences were related with the preferment levels (p<0.05). The textural characteristics of white pan bread were highly correlated with the amount of preferment added. White pan bread containing preferment showed a decrease in hardness and gumminess, and an increase in springiness. The color of white pan bread was not significantly different from that of the control. In sensory evaluation, the values for volume, springiness, and umami were highest in the white pan bread with 20% preferment, and the sour and umami tastes increased with the amount of preferment.

• Korean Journal of Food Science and Technology
• /
• v.13 no.2
• /
• pp.107-113
• /
• 1981

Free sugars were isolated from ginseng root and its products and analyzed by using high performance liquid chromatogrphy. To isolate free sugars from aqueous sample solution fat-soluble components, crude saponin and protein were removed from the solution by extracting with benzene, water-saturated butanol and 80% ethanol, respectively. Free sugars found from both ginseng root and its products were fructose, glucose, sucrose and maltose, and the only sugar detected from red ginseng root and its products was rhamnose. Major sugar detected from fresh ginseng and white ginseng roots was sucrose, while sucrose and maltose were major sugars of red ginseng root.

• Korean journal of food and cookery science
• /
• v.28 no.6
• /
• pp.789-796
• /
• 2012

This study attempted to investigate the characteristics of Superjami, which had a high C3G (cyandin-3-glucoside) content by comparing it with common rice (Ilpum) and black rice (Heougjinju, Suwon 415) for their components and physio-chemical characteristics. There were no significant differences in the water content, however there were significant differences in crude protein and crude fat in the order of Ilpum < Superjami < Heougjinju. As for the morphological characteristics of grains, it had been learned that Superjami was heavier and longer than the common rice, moreover Superjami had bigger seeds. As for the hardness of grains, the longer the time of steeping, the more decreased their hardness was at large. In the case of color, they showed significant differences in all the L, a, and b values of grains and flours. As a result of the experiment of pigment elution after steeping of the rice flours at $20^{\circ}C$ and $40^{\circ}C$, the longer the time steeping, the more increased the pigment elution became. The values are bigger with Heougjinju and Superjami than with Ilpum. As for the elution pH after rice steeping, the longer the time of steeping, the lower pH all the assays tended to have. As a result of the analysis of the total polyphenol contents of Ilpum, Heougjinju, and Superjami, it had turned out that the total polyphenol contents of Heougjinju and Superjami are 1.2 times as high as Ilpum, a common rice, and that Superjami is significantly higher than Heougjinju. As a result of the experiment of DPPH radical scavenging ability, there are significant differences among the assays in the order of Superjami > Heougjinju > Ilpum. Futher, it has turned out that Superjami has a higher DPPH radical scavenging ability than Heougjinju. Consequently, it can be stated that Superjami has a strong anti-oxidative ability. Thus, we should more precisely grasp the cooking characteristics of Superjami, which is in the state of brown rice, via comparing it with a common brown rice, and also provide opportunities to apply Superjamii to more foods by studying its starch characteristics in addition to its grain and flour properties.

• Applied Biological Chemistry
• /
• v.35 no.4
• /
• pp.308-314
• /
• 1992

To examine the characteristics of anti-complementary compounds from Arecae Pericarpium (the pericarps of Areca catechu) which showed the highest activity during our screening procedures, the extraction and purification were performed. AC-1 fraction from Arecae Pericarpium was purified by hot water extraction, methanol reflux, ethanol precipitation, dialysis and lyophilization. This compound had total sugar 48.2%, uronic acid 14.6% and protein 36.8%. Rhamnose, arabinose, mannose and galactose were found in sugar components. By cetavlon (cetyltrimethylammonium bromide) treatment AC-1 was fractionated to AC-2, AC-3 and AC-4. Among them, AC-2 showed the highest activity and yield. By periodate oxidation, AC-2 was deactivated, but had no change in activity by pronase digestion. Moreover active fractions, AC-2-IIIa and AC-2-IIIc isolated from AC-2 by two successive column chromatography using DEAE-Toyopearl $650C(Cl^-form)$ and Sephadex G-100. AC-2-IIIa was mainly made up of rhamnose, mannose, galactose and glucose, and AC-2-IIIc, mannose, galactose and glucose. These both polysaccharides were identified as homogeneous by gel filtration of Sepharose CL-4B and electrophoresis, and molecular weights of them were 120,000 and 15,000, respectively.

• Journal of Applied Biological Chemistry
• /
• v.60 no.3
• /
• pp.191-198
• /
• 2017

Hyaluronidase inhibitory activity as inflammatory factor of Koreinsis chinensis leaf ethanol extract was showed higher inhibitory activity than water extract. 29.5% inhibitory activity was shown at concentration of $200{\mu}g/mL$ phenolics. Lipopolysaccharide (LPS)-stimulated Raw 264.7 cells were treated with different concentrations ($5-25{\mu}g/mL$) of Koreinsis chinensis leaf extract and the amount of nitric oxide (NO) was determined; LPS-treated cells produced 3 times more NO than non-LPS treated cells. Moreover, the NO production in cells treated with Koreinsis chinensis leaf extract showed inhibitory effect in a concentration-dependent manner. Due to the stimulant-induced NO production is regulated by the inducible nitric oxide synthase (iNOS), we determined the iNOS protein level to elucidate the mechanism by which the NO production was inhibited. It was reduced by 40% with a Koreinsis chinensis leaf extract concentration of $25{\mu}g/mL$ and identified iNOS inhibition in dose-dependent manner. The prostaglandin $E_2$ production in cells treated with Koreinsis chinensis leaf extract was reduced by 26.2% at concentration of $25{\mu}g/mL$. The protein expression of cyclooxygenase-2 in LPS-treated Raw 264.7 cells was inhibited by 64% at $25{\mu}g/mL$ of Koreinsis chinensis leaf extract. Koreinsis chinensis leaf extract had a concentration-dependent inhibitory effect on the production of tumor necrosis factor-${\alpha}$ and interleukin-6 as pro-inflammatory cytokine in LPS-treated Raw 264.7 cells at $25{\mu}g/mL$ of Koreinsis chinensis leaf extract. Their levels were decreased by 61.7 and 62% respectively.

• Journal of Fisheries and Marine Sciences Education
• /
• v.5 no.1
• /
• pp.31-44
• /
• 1993

Through the early 1900's, the evolution of the surface condenser was closely tied to the development of steam engine and the turbine. As the chemical and petroleum industries evolved in the 1900's, the use of surface condensers in many different processes. Today, industry uses condensers in many shapes and sizes. The actual condensation process occurs on the outside surface of tubes. The nature of this surface geometry affects the condenser's heat transfer performance. The first condensers were built with plain tubes. As tube manufacturing techniques advanced, manufacturers started making tubes with integral fins. In the 1940's, fin densities were limited to about 600 to 700 fins per meter(fpm) because of manufacturing procedure. Today new manufacturing techniques allow production of tubes with fin densities ranging from 750 to 1600 fpm. The integral-fin tubes investigated in this paper are nominally 19 mm diameter. Eight tubes have been used with trapezodially shaped integral-fins having fin density from 748 to 1654 fpm and 10, 30 grooves. For comparison, tests are made using a plain tube having the same inside diameter and an outside diameter equal to that at the root of the fins for the finned tubes. Betty and Katz's theoretical modelis is used to predict the R-11 condensation coefficient on horizontal integral-fin tubes having 748, 1024 and 1299 fpm. Experiments are carried out using R-11 as working fluid. The refrigerant condensates at a saturation state of $30^{\circ}C$ on the outside tube surface cooled by coolant. The amount of noncondensable gases present in the test loop is reduced to a negligible value by repeated purging. For a given heat input to the boiler and given cooling water flow rate, all test data are taken at steady state. The observed heat transfer enhancement for the finned and grooved tubes significantly exceeded that to be expected on grounds of increased area. For the eight fin tubes and one plain tube tested, the best performance has been obtained with a tube having a fin density of 1299 fpm, and a fin bight of 1.2mm and 30 grooves.

• Membrane Journal
• /
• v.23 no.1
• /
• pp.92-99
• /
• 2013

In this study the nanofiltration (NF) membrane treatment of a sulfuric acid waste solutions containing copper ion ($Cu^{+2}$) discharging from the etching processes of the printed circuit board (PCB) manufacturing industry has been studied for the recycling of acid etching solution. SelRO MPS-34 4040 NF membrane from Koch company was tested to obtain the basic NF data for recycling of etching solution and separation efficiency (total rejection) of copper ion. NF experiments were carried out with a dead-end membrane filtration laboratory system. The pure water flux was increased with the increasing storage time in sulfuric acid solution and lowering pH of acid solution because of the enhancement of NF membrane damage by sulfuric acid. The permeate flux of acid solution was decreased with the increasing copper ion concentration. Total rejection of copper ion was decreased with the increasing storage time in sulfuric acid solution and copper ion concentration, and lowering the pH of acid solution. The total rejection of copper ion was decreased from initial 37% to 15% minimum value.

• Journal of Fashion Business
• /
• v.15 no.5
• /
• pp.43-54
• /
• 2011

Digital Textile Printing(DTP) is appropriate for quick response system(QRS) and is closely connected with high value added fashion industry. Fashion products of high price are mainly silk and cotton. For high quality DTP products, it is important to optimize the parameters of media, pre and after-treatment, ink, printer, etc. DTP for these two fiber materials is also accompanied certainly with steaming as after-treatment process for coloration. Role of steam is like water in exhaustion dyeing. Steam can diffuse dye or ink in printing paste to fiber. Quality of DTP products depend on after-treatment processes such as steaming, washing, drying. Current production amount of DTP is smaller than one of conventional textile printing. However conventional after-treatment system has been using so far. This is mismatched with DTP in terms of process efficiency, spot work of small lot, quality control. In this study, continuous after-treatment system has been suitably designed for DTP that washing and drying are available after steaming. So, It is possible to improve efficiency of DTP process. Especially, the effects of after-treatment process, such as temperature of heat drum, steaming time on printability, color difference, color fastness were examined. Two types of samples(cotton knit and silk fabrics) were used. The results were obtained as follows : First, there is no a wide difference between the K/S values of cotton and silk treated with continuous after-treatment system and those of sample treated with conventional printing after-treatment method. So it is more effective to use the continuous after-treatment system than conventional printing after-treatment system in case of the daily throughput of 1,000 yards below. Second, after continuous after-treatment for DTP, K/S values were increased and lightness($L^*$) values were decreased. ${\Delta}E$ values were below 2.3. Third, DTP samples treated with continuous after-treatment system were tested for fastness(washing, light, rubbing). Grades of fastness(washing, light, rubbing) were above 3 grade.

• Journal of Life Science
• /
• v.15 no.3 s.70
• /
• pp.374-381
• /
• 2005

The production of functional foods providing health benefit is one of the fast growing fields in the food industry. Mannitol as GRAS (generally recognized as safe) is a functional food. Mannitol is about $70\%$ as sweet as sucrose and slowly and incompletely absorbed from the intestine, suppling only about one-half energy value of glucose. Commercially, the mannitol is synthesized by catalytic or electrochemical reduction of glucose. However, as strong demand for natural products increased, biological techniques have been developed for mannitol production. The object of this study was to determine the optimum conditions of mannitol fermentation by Leuconostoc mesenteroides sp. strain JFY isolated from fermented vegetables. The processes parameters such as pH, temperature, yeast extract concentration, and fructose concentration were optimized. The chosen ranges were 4.5 to 7.5 for pH, 22 to $34^{\circ}C$ for temperature, 0.05 to $2.0\%$ for yeast extract. and 5 to 350 g/L for fructose. The mineral medium used consisted of 3.0g $KH_2PO_4,\;0.01g\;FeSO_4{\cdot}H_2O,\;0.01g\;MnSO_4{\cdot}4H_2O,\;0.2g\; MgSO_4{\cdot}7H_2O,\;0.01g\;NaCl,\;and\;0.05g\;CaCl_2$ per 1 liter of deionized water. The optimum values of pH, temperature, yeast extract, and fructose concentration were obtained at about pH 6.5, temperature $28^{\circ}C$, yeast extract $0.5\%$ and fructose 30g/L. At optimum condition, the production of mannitol amounted to 31.6g/l. We hope that these findings are of particular importance for industrial application of mannitol production.

• Korean Journal of Food Science and Technology
• /
• v.42 no.5
• /
• pp.632-636
• /
• 2010

The level of ${\gamma}$-aminobutyric acid (GABA) in pigmented rice was quantitatively and qualitatively determined by high pressure liquid chromatography/fluorescence detection (HPLC/FLD). In this study, the recovery rate and limit of detection (LOD) of GABA were 122.4${\pm}$2.4% and 0.23 ${\mu}g/g$, respectively. The geminating pigmented rice samples, which were harvested in Paju, Korea, were soaked in water at $18^{\circ}C$ for 20 hr. After soaking, the samples were germinated at $30^{\circ}C$ for about 24 hr. GABA content was highest (293.0 ${\mu}g/g$) in the germinated red rice. Furthermore, GABA levels in the germinated rice increased significantly by up to 11.1 and 24.7-fold as compared to non-germinated rice and milled rice, respectively. The GABA concentrations of non-germinated rice, with the exception of red rice, were significantly higher than those of milled rice by 7.6-20.6-fold.