• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(2)
• /
• pp.1226-1227
• /
• 2005

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 추계학술발표회
• /
• pp.99-102
• /
• 2001

The soil-to-air fluxes of three PAHs(Phenanthrene, Pyrene, Benzo(a)pyrene) from a laboratory contaminated forest soil were investigated in experimental microcosms. The effects of soil temperature(45$^{\circ}C$, $25^{\circ}C$, 5$^{\circ}C$) and relative humidity(0%, 100%) were investigated according to existence of the humic layer(O layer) over the mineral layer(A layer). Volatilization flux experiments were carried out for a period of 96 hrs. The resulting PAHs volatilization fluxes from the different conditions were quantified and compared. In the mineral layer, highest volatilization flux among the individual PAHs was Phenanthrene >Pyrene> Benzo(a)pyrene on the conditions of 45 $^{\circ}C$, RH=100%. In the humic layer over the mineral layer, maximum volatilization flux was Phenanthrene on the condition of 45$^{\circ}C$, RH=0%. Results from flux experiments showed that volatilization fluxes of PAHs were dependent on soil temperature. Existance of humic layer over the mineral layer delayed transportation to the air of especially heaveir molecular PAHs. But, if humic layer is contained water sufficiently, it is possible that volatilization fluxes are enhanced by water convective flux according to variation of soil temperature and air relative humidity.

• 한국해양학회지:바다
• /
• 제9권4호
• /
• pp.153-163
• /
• 2004

In order to estimate the nutrient flux of the Seomjin River into the coastal waters of South Sea, and to understand the estuarine reactions during mixing between river water and seawater, we collected surface water along the salinity gradient in the Seomjin River estuary from Mar. 1999 to Apr. 2001. We found that nitrate and silicate were delivered by fluvial input, while phosphate was, supplied from disposed wastes in the Gwangyang Bay. Mean annual flux of dissolved inorganic nitrogen (DIN), phosphate and silicate into the Gwangyang Bay was estimated 10.9 molesㆍsec$^{-1}$(4,820 tonnesㆍyr$^{-1}$), 0.07 molesㆍsec$^{-1}$(68 tonnesㆍyr$^{-1}$), 13.3 molesㆍsec$^{-1}$(11,747 tonnesㆍy$^{-1}$), respectively. An evident removal of phosphate, silicate and ammonium at the mid-salinity zone during the dry season was attributed to the active uptake of phytoplankton, and consequently nutrient flux into the Gwangyang Bay was low. Whereas, during the flood season in summer, conservative or additional distribution of the nutrients was observed in the estuary. As a rsult nutrient flux into the Gwangyang Bay was maintained high. High concentrations of chlorophyll a and the active removal of nutrient during the dry season at the mid-salinity zone suggest that nutrient distribution in the Seomjin River estuary was mainly controlled by biological processes and nutrient fluxes into the Gwangyang Bay might be significantly modified of by the primary production.

• 멤브레인
• /
• 제9권2호
• /
• pp.107-113
• /
• 1999

상업용 PDMS(polydimethylsiloxiane) 복합막과 플라즈마 처리된 PP(polypropylene)막을 사용하여 투과증발에 의한 알코올 농축을 수행하였고, 공정 조업 변수에 따른 영향을 조사하였다. PDMS막에 대한 부탄올의 친화력과 물의 친화력보다 크기 때문에 공급액의 부탄올 농도가 증가함에 따라 투과량의 선택도가 모두 증가하였다. 조업 온도가 증가함에 따라 고분자 사슬내의 자유 부피)free volume)가 증가하고 막에 대한 알코올과 물의 용해도 및 확산계수도 증가하여 투과량은 증가하였지만, 선택도는 감소하였다. PDMS 막과 용해도 계수(solubility parameter)값의 차가 적은 알코올일수록 높은 투과량과 선택도를 나타내었다. PP막을 메탄올로 플라즈마 처리한 경우 PDMS 복합막과 유사한 분리효율을 나타내면서도 투과량은 6배나 증가하였다. 플라즈마 처리 시간에 따라 투과량과 선택도는 모두 향상되었으나 일정 시간 이후에는 기공의 막힘 현상으로 투과량은 감소하였다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.176-181
• /
• 2007

This study aims to evaluate theoretically heat transfer characteristics and heat flux performance in ondol system of dried type is composed of panel of ceramics to improve of thermal conductivity and fin to expand heat. To this end, we analyzed effect of design factors(temperature of hot water, set temperature of room and thermal conductivity of finishing materials) in ondol system of dried type by heat transfer analysis. The main results of this study are summarized as follows; The deviation of heat flux and temperature was reduced by heat expansion from fin decreasing heat loss generated in air layer. The temperature and heat flux in upper finishing materials surface linearly increased according to temperature increment of hot water, but the temperature distribution in upper surface was assessed uneven. The greater heat resistance value of upper finishing materials, the deviation of maximum temperature and minimum temperature was decreased. Also, we suggested a basic design data about ondol system of dried type through an analysis of simulation results on heat transfer characteristics and heat flux performance.

• 대한안전경영과학회지
• /
• 제19권4호
• /
• pp.317-322
• /
• 2017

When the heat flux on the heating surface following changing heat condition in the boiling heat transfer system exceeds critical heat flux, the critical heat flux phenomenon is going over to immediately the film boiling area and then it is occurred the physical destruction phenomenon of various heat transfer systems. In order to maximize the safe operation and performance of the heat transfer system, it is essential to improve the CHF(Critical Heat Flux) of the system. Therefore, we have analysis the effect of improving CHF and characteristics of heat transfer following the nanoparticle coating thickness. As the results, copper nanocoating time are increased to CHF, and in case of nano-coatings are increased spray-deposited coating times more than in the fure water; copper nanopowder is increased up to 6.40%. The boiling heat transfer coefficients of the pure water are increased up to 5.79% respectively. Also, the contact angle is decreased and surface roughness is increased when nano-coating time is increasingly going up.

• 상하수도학회지
• /
• 제21권4호
• /
• pp.493-501
• /
• 2007

The membrane pilot plant has being operated in the Hyeondo pumping station to find the optimal operation technique of Gong-Ju membrane water treatment plant (WTP) which is constructing in $250m^3/d$ scale. The pilot plant was consisted of two trains which can treat $30,000m^3/d$ per train. First train was operated for one year under the condition of flux $1m^3/m^2{\cdot}d$ while the effects of flux variation and addition of powdered activated carbon(PAC) were evaluated in second train. The turbidity of membrane product water of first train which is operated on Flux $1m^3/m^2{\cdot}d$ was always below 0.05 NTU regardless of raw water turbidity. And also, the trance-membrane pressure(TMP) was maintained at $0.3{\sim}0.5kgf/cm^2$ for about 9 months and increased rapidly to $1.8kgf/cm^2$ which is maximum operating TMP. However, TMP was rapidly increased to $1.8kgf/cm^2$ within 2 months as flux was increased from 1 to $2m^3/m^2{\cdot}d$, especially, within 10 days under high turbidity(30~50NTU). This reault means that if Gongju membrane WTP is operated in flux $1m^3/m^2{\cdot}d$, chemical cleaning period can be maintained over 6 months. Only 10% of dissolved organic carbon (DOC) was removed in membrane process while the removal efficiencies of manganese and iron were 60% and 77% respectively. However, because only solid manganese and iron were removed in membrane process, an additional process for treating soluble manganese is required if souble manganese is high in raw water. 70% of 70ng/L 2-MIB which is causing taste & odor was removed in powdered activated carbon (PAC) tank with 50mg/L PAC which is design concentration of Gongju WTP. In addition, TMP was reduced with addition of 50mg/L PAC regardless of flux. Because TMP was not influenced even if 100mg/L PAC was added, the high taste and odor problem can be controled by additional injection of PAC.

• 공업화학
• /
• 제10권6호
• /
• pp.954-959
• /
• 1999

본 연구에서는 소수특성의 PP 정밀여과막에 방사선을 조사하여 친수성 모노머인 2-hydroxyethyl methacrylate(HEMA), acrylic acid(AAc) 및 methacrylic acid(MAAc)를 그라프트 중합하였다. 3가지 모노머에 대한 그라프트 중합반응에서 물/메탄올 혼합용매의 조성에 따라 그라프트율에 미치는 효과를 조사하였으며, 이에 대한 각 모노머의 농도에 따른 영향을 고찰하였다. 가장 높은 그라프트율을 얻는 용매조건은 AAc는 순수한 물에서, MAAc는 물/메탄올 혼합비가 50/50 vol %에서, 그리고 HEMA는 25/75 vol %이었다. 그라프트된 PP 다공성 분리막의 모노머 도입여부와 표면특성변화는 FTIR-ATR 및 SEM을 이용하여 관찰하였다. 또한 인장강도와 연신율을 측정하여 그라프트율에 따른 막의 기계적 특성을 평가하였다. 그라프트된 PP막은 본래의 PP막보다 물 투과속도가 증가하였으며, 물 투과에 적당한 모노머로 HEMA임을 알았고 99%의 그라프트율에서 가장 좋은 물 투과속도를 보였다. 또한 AAc가 그라프트된 PP막 및 MAAc가 그라프트된 PP막의 물 투과속도는 pH나 $Cu^{2+}$에 의해 크게 좌우되나 HEMA는 pH나 $Cu^{2+}$에 영향이 거의 없었다.

• Korean Membrane Journal
• /
• 제11권1호
• /
• pp.15-20
• /
• 2009

The periodic water-back-flushing using permeate water was performed to minimize membrane fouling and to enhance permeate flux in tubular ceramic ultrafiltration (UF) system for Gongji stream water treatment in Chuncheon city. The filtration time (FT), which was the water-back-flushing period, 2 min with periodic 15 sec water-back-flushing showed the highest value of dimensionless permeate flux ($J/J_o$), and the lowest value of resistance of membrane fouling ($R_f$), and we acquired the highest total permeate volume ($V_T$) of 6.35 L. Consequently FT 2 min at back-flushing time (BT) 15 sec could be the optimal condition in advanced UF water treatment of Gongji stream. Then the average rejection rates of pollutants by our tubular ceramic UF system were 99.4% for Turbidity, 31.8% for $COD_{Mn}$, 22.6% for $NH_3$-N and 65.9% for T-P.

• 멤브레인
• /
• 제24권3호
• /
• pp.194-200
• /
• 2014

본 연구의 목적은 대기공 정밀여과(Large Pore Micro-Filtration, LPMF)막의 수처리 응용을 위한 실험실 규모에서의 성능을 평가한 것으로 이를 통해 문제점 및 해결방안을 제시하는 것이다. 본 연구에 사용된 평균 기공이 $5{\mu}m$ LPMF막은 PET Braid가 보강되어 있는 PVDF 재질의 외압형 중공사막으로 여과실험은 30 cm의 수두차 혹은 1.5 bar 이하의 압력차로 수행하였으며, 역세는 여과수에 압축공기로 약 4 bar의 압력을 가한 후 수초 내에 순간 역세하는 가압역세였다. 0.2 bar의 TMP (Trans Membrane Pressure)에서 $0.05{\mu}m$ UF로 전처리한 시수로 $0.4{\mu}m$의 MF와 flux를 비교한 결과 UF에 비해 LPMF의 flux가 약 2배 정도 높았으며, 동일한 시수에 대해 15~30 cm의 수두차에 따른 flux를 측정한 결과 30 cm 수두차에서 800 LMH 이상의 높은 flux를 확인하였다. 또한 여과수의 탁도 향상과 여과 flux의 안정적 유지를 위해 여러 가지 무기응집제에 대한 $5{\mu}m$ 기공의 여지를 이용한 Time-To-Filter (TTF)를 통해 적정 응집제 및 그 주입량을 결정하였다. 고농도 무기응집제 주입 및 30 cm 이상의 수두차로 LPMF를 중력식으로 운전하였을 때 flux는 80 LMH 이상이었고, 탁도 제거율은 93.5~99.5%이었다. 특히 약 4 bar의 압력의 순간 가압역세를 한 결과 막의 충진율이 19%인 경우 여과수의 회수율을 약 97%로 유지하면서도 여과 flux가 안정적으로 유지되었으나, 막충진율을 약 43%인 경우 순간 가압역세만으로는 역세가 불안정하였던 관계로 여과압력이 지속적으로 상승하는 등의 여과공정이 불안정한 문제점을 보였다.