• Current Optics and Photonics
• /
• 제3권3호
• /
• pp.199-203
• /
• 2019

The characteristics of a photonic crystal fiber sensor with reuleaux triangle are studied by using the finite element method. The wavelength sensitivity of the designed optical fiber sensor is related to the arc radius of the reuleaux triangle. Whether the core area is solid or liquid as well as the refractive index of the liquid core contributes to wavelength sensitivity. The simulation results show that larger arc radius leads to higher sensitivity. The sensitivity can be improved by introducing a liquid core, and higher wavelength sensitivity can be achieved with a lower refractive index liquid core. In addition, the specific channel plated with gold film is polished and then analyte is deposited on the film surface, in which case the position of the resonance peak is the same as that of the complete photonic crystal fiber with three analyte channels being filled with analyte. This means that filling process becomes convenient with equivalent performance of designed sensor. The maximum wavelength sensitivity of the sensor is 10200 nm/RIU and the resolution is $9.8{\times}10^{-6}RIU$.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2001년도 춘계 학술발표회 논문집
• /
• pp.119-124
• /
• 2001

• 대한기계학회논문집B
• /
• 제38권12호
• /
• pp.1051-1056
• /
• 2014

열간 압연을 거친 $800^{\circ}C$ 이상의 고온 철강 판재는 일반적으로 다중 봉상 수분류(multiple circular water jets)에 의해서 급속 냉각된다. 이 과정은 소재의 온도가 냉각수의 끓는점보다 훨씬 높기 때문에 소재 표면과 냉각수 사이에 막비등 열전달 현상이 발생하며 소재 표면에 매우 얇은 증기층이 형성되며, 이 증기층은 소재와 냉각수의 열교환을 방해하는 중요한 열저항으로 작용한다. 본 문제에는 비등 열전달 이외에도 소재 표면에 쌓이는 체류수의 자유표면 유동, 소재의 고속 주행 등 복잡한 물리현상들이 복합적으로 작용하고 있다. 본 논문에서는 이 모든 물리현상들을 동시에 고려할 수 있는 해석 절차를 적용하여 일정한 속도로 주행하는 고온 철강 판재의 상하부 동시 냉각 과정을 3 차원 수치해석 하였으며, 소재 상부 및 하부 면의 냉각 특성을 비교하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1315-1318
• /
• 2007

Hafnium dioxide nano film as gate insulator for organic thin film transistors is prepared by atomic layer deposition. Mostly crystalline of $HfO_2$ films can be obtained with oxygen plasma and with water at relatively low temperature of $150^{\circ}C$. $HfO_2$ was deposited as a uniform rate $1.2A^{\circ}/cycle$. The morphology and performances of OTFT will be discussed.

• 산업기술연구
• /
• 제33권A호
• /
• pp.67-72
• /
• 2013

CNT(carbon nanotube) humidity sensors with plasma treated electrodes exhibit a much faster response time and a higher sensitivity to humidity, compared to untreated CNT and porous Cr electrodes. These results may be partially due to their percolated pore structure being more accessible for water molecules and for expending the diffusion of moisture to the polyimide sensing film, and partially due to the oxygenated surface of CNT films. This paper shows a plasma process effect and selectivity characteristics of CNT film humidity sensor.

• KSBB Journal
• /
• 제31권4호
• /
• pp.291-299
• /
• 2016

In this study, Indomethacin, the poorly water soluble drug, was selected and prepared dispersing oral disintegrating films according to the molecular weight of polyethylene glycol (PEG) which are sort of dispersing agents. Also the molecular weight and content of PEG were evaluated effect on the degree of dispersion, physical property and dissolution when making oral dispersing film containing indomethacin to find appropriate condition and suggested guidelines of making oral dispersing film. The appropriate dispersing ratio of the amount of surfactants and dispersing agent were 1% and 4%, also the stability dropped in the PEG molecular weight of 4000 or more. Drying time of oral dispersing film was $90^{\circ}C$ for 10 minutes to 12 minutes that dispersing film's property about flexibility, detachability were very good. The oral dispersion film's content used PEG 400 was $98.6{\pm}0.5%$ and the most uniform. As the molecular weight of PEG increased, dissolution time also increased. On the basis of evaluation parameter, PEG with 400~600 of molecular weight was selected as good dispersing agent in oral dispersing film. Therefore, it can be suggested guideline of preparation application study in oral dispersing film.

• 한국수소및신에너지학회논문집
• /
• 제25권2호
• /
• pp.145-150
• /
• 2014

This study investigates the preparation of anti-reflective (AR) coating film to improve the efficiency of solar cell. The AR coating film was successfully obtained by dip-coating with AR coatings prepared by sol-gel method. Fluoroalkylsilane was additionally introduced into the coatings to give the self-cleaning effect of AR coating film. We performed the abrasion test, pencil scratch hardness test and cross-cut test to identify the mechanical strength of AR coating film. As the results, the transmittance of AR coating films with 9.07, 18.13 and 27.20 of IPA/MTMS molar ratios were 93.1, 93.6 and 95.3%, respectively. The water contact angle and transmittance of AR coating film increased by the introduction of hydrophobicity. The prepared AR coating film shows the high level of abrasion, hardness and adhesion. The IPA/MTMS molar ratio of 27.20 and the withdrawing speed range of 0.20 ~ 0.28cm/sec are the optimal coating condition in terms of the transmittance and mechanical strength of AR coating film.

• Preventive Nutrition and Food Science
• /
• 제13권4호
• /
• pp.370-374
• /
• 2008

The Gelidium corneum (GC)-whey protein isolate (WPI) blend film containing grapefruit seed extract (GSE) was prepared by incorporating different amounts (0, 0.02, 0.04, 0.08, 0.1%) of GSE into the film. The film's tensile strength (TS) and water vapor permeability (WVP) were improved by the addition of GSE. The film containing 0.1% GSE had a TS of 3.27 MPa, whereas the control had 2.64 MPa. WVP of the film was also significantly decreased by the addition of GSE. Addition of 0.1% GSE decreased the populations of Escherichia coli O157:H7, Listeria monocytogenes, and Salmonella Typhimurium by 1.0, 1.6, and 0.6 log CFU/g, respectively, compared to the control. Fish paste was packed with the GC-WPI blend film containing GSE, and microbial change in the fish paste inoculated with E. coli O157:H7, L. monocytogenes, and S. Typhimurium during storage was examined. Populations of E. coli O157:H7, L. monocytogenes, and S. Typhimurium were decreased by 0.60, 0.48, and 0.85 log CFU/g, after 7 day of storage, respectively. These results suggest packaging fish paste in the GC-WPI blend film containing GSE can extend the shelf life.

• 전기학회논문지
• /
• 제63권10호
• /
• pp.1412-1416
• /
• 2014

We report thin-film organic moisture barriers based on polystyrene(PS) laminates deposition by PECVD for an encapsulation of OLEDs. The organic polystyrene thin-film has the benzene ring structure and high hydrophobic characteristics and it was polymerized by PECVD in dry process. Life time properties of Ca test were obtained 32 minutes at the RF 100W process conditions. From the AFM test, the roughness of multi-layer thin-film was more excellent rather than that of a single-layer thin-film. In addition, 5 layers of the multi-layer film properties were obtained 45 minutes. So that the optical and electrical properties were not affected with these plasma polymerized organic thin-film encapsulation. For life time improvement, the inorganic $Al_2O_3$ thin-film were deposited 5nm using ALD atomic layer deposition. The WVTR(Water Vaper Transmission Rate) value of hybrid thin-film encapsulation in the optimum process conditions was resulted by less than $10-3g/m^2/day$. From the results of experiment, plasma polymerized hybrid encapsulation was suggested as the flexible display applications.

• 한국수산과학회지
• /
• 제33권4호
• /
• pp.356-360
• /
• 2000

${\beta}-chitin$으로 되어 있는 오징어 연골로부터 간헐적으로 chitosan을 만든 다음 Chitosan 및 acetylchitosan 필름을 제조하여 생물 기능성 소재로서의 필름의 특성에 대하여 검토한 결과 N-ACF-1을 만들 때 사용되는 무수초산과의 반응시간은 12시간 정도가 적당하였으며 이 때 I.R. spectrum상에 $1,732cm^(-1)$에서 bend가 나타났으며 이 ester carbonyl group은 1M KOH/MeOH로 실온에서 4시간 정도 침지시켰을 때 bend가 사라졌다. 두께가 0.02 mm인 chitosan film의 인장강도가 $1,240kg/cm^2$, 신장율 $58.25{\%}$로 가장 컸으며 N-ACF-1이 투습도 $5391m^2{\cdot}24hr$, 산소투과도 $20,000cm^3/m^2{\cdot}24hrs{\cdot}atm$로 3개의 필름 중 가장 높았다. 필름의 흡수능은 두께가 0.02mm인 N-acetylchitosan film이 $60min에서 350{\%}$ 정도 흡수하였다. 두께가 0.04mm N-ACF-1은 $60min$에서 약 $300{\%}$ 흡수하여 두께가 얇은 것이 더 높은 흡수능을 나타냈다.