고로슬래그(BFS) 경량기포콘크리트 제조의 최적 배합비를 도출하기 위해 반응표면분석법 중 하나인 Box-Behnken법을 이용하여 연구를 수행하였다. 경량기포콘크리트는 상압증기양생법으로 제조하였으며 주요 실험변수로는 물/분체($W/P_d$)비, BFS 치환률 그리고 분체량($P_d$) 기준 Al분말 첨가량을 설정하였다. 반응표면분석에 의해 경량기포콘크리트의 절건비중 및 압축강도에 대한 회귀 모델식이 유도되었다. 경량기포콘크리트의 절건비중과 압축강도에 대한 목표값을 각각 0.72와 4.42 MPa로 설정하고 회귀 모델식에 의해 도출된 경량기포콘크리트의 최적 배합비는 $W/P_d$비 0.62, BFS 치환률 35.5% 그리고 분체대비 Al분말 첨가량 0.05%이었다. 이처럼 도출된 배합비로 제조한 경량기포콘크리트 시험체에 대한 절건비중과 압축강도의 측정값을 통해 회귀 모델식의 신뢰성이 확인되었다.
이 연구는 변형률 경화거동을 나타내기 위한 압출성형된 ECC를 제조하기 위하여 사용되는 조성물의 특성, 제조 방식, 배합 조건, 양생 조건에 관한 검토를 수행하였으며, 섬유의 분포 특성이 압출성형 ECC의 휨거동에 미치는 영향을 파악하고자 하였다. 이를 위하여 이론적/실험적 연구를 수행하여 압출성형 ECC를 생산하기 위한 기본 배합 및 제조 공정을 제시하였으며, 이미지 프로세싱 기법을 이용하여 섬유 분포 특성을 파악하였다. 실험 결과, 최적의 압출성형 ECC 패널의 배합비를 물-매트릭스 비, 시멘트, ECC 파우더, 그리고 규사미분의 비율로 제시하였다. 또한 섬유 분포 특성은 배합에 따라 달라지며 이러한 섬유 분포 특성에 따라 휨거동에 차이가 발생하는 것으로 나타났다. 즉, 섬유 분산성이 좋을수록, 상보에너지($J_b'$)와 최고 가교 응력(${\sigma}_0$)이 클수록 휨 인성이 크게 나타났다. 이는 ECC 배합의 차이가 섬유 분포 특성에 차이를 줄 뿐만 아니라, 마이크로역학 특성에도 변화를 주기 때문이다. 섬유 방향성의 경우, 실험체 별로 크게 차이가 발생하지 않았으나 섬유의 분포가 3차원보다 2차원에 가깝게 배열되는 것으로 나타났다. 그러나 섬유 방향성에 대한 확률 밀도 함수는 2차원으로 가정한 경우와 매우 다른 양상을 보이는 것으로 나타났다. 따라서 원하는 성능(초기균열 강도 및 인성)을 얻기 위해서는 배합과 섬유 분포 특성을 고려하여야 하는 것으로 나타났다.
본 연구는 Pb와 Cu로 오염된 사격장 토양을 대상으로 폐자원을 가공하여 만든 안정화제를 이용하여 안정화 처리를 수행하였다. 안정화제는 폐굴껍질을 소성하여 생석회로 가공한 Calcined oyster shells (COS)와 폐소뼈를 가공한 Waste cow bones (WCB)로 오염토 함량대비 각각 5%와 3%를 사용하여, 28일간 습윤양생한 후 각종 용출시험법을 통해 효율성을 평가 하였다. 증류수 용출 및 SPLP에서는 뚜렷한 안정화 효율이 관찰되지 않았는데, 이는 중성 또는 약산성 환경에서는 중금속의 용출량 자체가 많지 않기 때문으로 판단된다. 반면, TCLP 및 0.1 N HCl을 이용한 용출실험에서는 안정화 처리를 한 토양의 경우 중금속의 용출량이 확연하게 감소한 것을 확인할 수 있었다. 특히, 0.1 N HCl 용출 결과에서 Pb 99.9%, Cu 83.9%의 매우 높은 용출량 저감효과를 보였고, 이는 비교적 강산성 용출환경에서는 중금속의 안정화 효과가 크게 나타남을 의미한다. 연속추출 결과를 통해 Pb와 Cu 간에 안정화 경향성의 차이는 Pb가 불용성 물질로의 변환과 안정화 효율이 더 탁월한 것으로 판단된다. 본 연구는 폐자원을 이용한 안정화제가 오염토양 처리에 활용 가능함을 증명하고 있고, 또한 폐기물로 취급되는 폐자원의 재사용 방안을 제시한다는 점에서도 큰 의미를 갖는다.
원전콘크리트는 두꺼운 벽체를 가진 매스콘크리트 구조이며 시공초기에 건조수축 및 수화열에 따른 균열이 발생하기 쉽다. 또한 냉각수를 항상 필요로 하므로 해안가에 위치하는데, 균열이 발생한 콘크리트에서는 염화물 이온의 유입으로 인해 철근 부식이 빠르게 발생한다. 본 연구에서는 6000 psi 급 고강도 원전콘크리트 배합을 이용하여 재령 및 균열에 따른 확산계수의 변화를 분석하였다. 이를 위해 재령 56일, 180일, 365일 동안 양생된 콘크리트에 균열폭을 0.0~1.4 mm까지 유도하였으며 정상상태의 촉진 확산실험을 수행하였다. 균열폭의 증가에 따라 확산계수는 최대 2.7~3.1배로 증가하였으며, 재령의 증가에 따른 확산계수의 저감성이 크게 평가되었다. 또한 180일 동안 비말대에 노출된 균열부 콘크리트에 대하여 겉보기 확산계수 및 표면염화물량을 평가하였으며, 촉진 실험결과와 비교를 수행하였다.
본 연구에서는 벤토나이트로 굴착 트렌치의 안정성을 유지하면서 시멘트와 벤토나이트 혼합물을 불투수벽체의 재료로 사용하여 지중차수벽체를 구성하는 새로운 시공방법에 대해 고찰하였다. 강화벤토나이트 차수벽체공법은 굴착된 구역을 균질하게 차수재료로 치환하므로 일반적인 그라우팅공법에 비해 차수효과의 예측과 시공성과의 검증이 보다 용이한 장점을 지닌다. 또한 강화벤토나이트 차수벽체공법은 시공 장비가 단순하고 시공 순서가 간단하므로 경제적인 측면에서도 큰 장점을 가지고 있다. 본 연구에서는 다양한 실내실험을 통해 배합재료와 배합방법의 변화에 따른 강화벤토나이트 차수벽체의 공학적 특성을 고찰하였으며, 본 공법의 실무 적용 시 시공비용 결정과 벽체의 설계를 위해 가장 중요한 표준 배합비와 배합방법을 제시하였다. 마지막으로 차수벽체를 구성하는 재료들의 결합재로 사용되는 일반포틀랜드 시멘트와 고로슬레그 시멘트의 효과를 비교하였다.
Two-step or one-step bonding systems generally inhibit curing process of dual-cured core build-up resin composite for their adhesive acidity. In addition this dual-cured core build-up resin composite can be applied to dentin of pulp chamber and root at the time that complete the endodontic treatment. The purpose of this investigation was to determine the influence of sodium hypochlorite on rnicrotensile bond strength of dual-cured core build-up resin composite. Extracted human molars were horizontally sectioned with 1mm thickness using low speed diamond saw. After the sectioned specimens were divided into 8 groups, adhesive systems (Clearfil SE-Bond, Prime&Bond NT[2-step, 1-step], Adper Prompt L-Pop) were then applied with or without sodium hypochlorite pretreatment. The treated specimen was filled with dual-cured core build-up resin composite (Luxacore, DMG corp., German). Then light cured for 40 seconds and soaked in $37^{\circ}C$ water bath for 24 hours. After the treated specimen was grinded with 1mm width and measured rnicrotensile bond strength by testing machine. Additionally 8 teeth were prepared for SEM evaluation. The results were as follows. : NaOCl treated groups generally had lower rnicrotensile bond strength but did not show any difference statistically except Adper Prompt L-Pop. When the teeth were treated by NaOCl, though the difference of applied adhesive system, it had no statistically significant difference within the NaOCl treated groups except the relation of between ClearFil SE-Bond adhesive system and Adper Prompt L-Pop adhesive system. In the SEM evaluation, NaOCl treated groups presented relatively long resin tags and incomplete hybrid layer formation generally.
Resin-modified glass ionomers were introduced in 1988 to overcome the problems of moisture sensitivity and low early mechanical strengths of the conventional glass ionomers, and to maintain their dinical advantages. The purpose of this study was to evaluate the bi-axial fracture strength of four resinmodified glass-ionomers(Fuji II LC, Vitremer, Dyract, VariGlass), one resin composite material(Z-100), and one conventional glass-ionomer(Fuji II). Three specimens of each material and shade combination were made according to the manufacturers' instructions. Materials were condensed into metal mold with a diameter of 10mm and a thickness of 2.0mm and pressed between two glass plates. Resin-modified glass ionomers were polymerized using a Visilux II light curing unit by irradiating for 60 seconds from both sides, and conventional glass ionomer was cured chemically. After specimens were removed from the molds, surfaces were polished sequentially on wet sandpapers up to No. 600 silicone carbide paper. The specimens were thermocycled for 2,000 cycles between $5^{\circ}C$ and $55^{\circ}C$ distilled water. After thermocycling, bi-axial fracture strengths were measured using a compressive-tensile tester(Zwick 1456 Z020, Germany) with the cross head speed of 0.5mm/minute. The results were as follows: 1. Two factors of the kind and color of materials had a main effect on bi-axial fracture strength (p<0.01), and bi-axial fracture strength was influenced significantly by the kinds of materials (p<0.01). But there was no significant interaction between two variables of the kind and color of materials (p>0.05). 2. Comparing the mechanical properties of the materials, the elastic modulus of Z100 was higher than any other material, and there was no difference in the displacement at fracture among materials. The bi-axial fracture strength of Z100 was significantly higher than any other material, and that of resin-modified glass ionomers was significantly higher than that of conventional glass ionomer (p<0.05). 3. In the same material group, the color of material had little influence on the mechanical properties.
The purpose of this study was to examine the fracture strength and characteristics of teeth with MOD cavity preparation. Freshly extracted sound maxillary premolars were cleaned and stored in normal saline solution $37^{\circ}C$ for 72 hours before experiments. The roots of teeth were embedded in a self-curing resin, and the exposed crown were maintained in a vertical position by a modelling wax in a brass ring. The MOD cavities were prepared with No. 57 carbide bur under high speed to a depth of 2.0mm and a width of 2.0mm(Fig.1). All the prepared teeth specimens were divided into 7 groups according to the mode of cavity form and restorative materials (Table 1, 2): Group I, unpreapred, intact teeth as control Group II, prepared cavity without restoration Group III, prepared teeth restored with amalgam Group IV, prepared teeth restored with composite resin (P-10) Group V, prepared teeth with beveled enamel margins restored with composite resin (P-10) Group VI, prepared teeth restored with light-cured composite resin (P-30) Group VII, prepard teeth with beveled enamel margins restored with light-cured composite resin (P-30) After placement of restorations, all of the specimens were stored in water at $37^{\circ}C$ for 72 hours before testing. All of the specimens were tested on the Instron Universal Testing machine (No. 6025) in order to evaluate the strength of fracture. One metal ball 5.0mm in diameter contacting the specimens parallel to the occlusal surface was used to in this study (Fig. 1). The fracture characteristics of the specimens were examined with naked eye and in the scanning electron microscope (JSM-20). The results obtained from this study were as follows: 1. The mean fracture strength was the highest in group VI and that in group II was the lowest. 2. The progress of crack of teeth propagated into the pulp cavity. 3. In case of the group of the restored teeth, the crack occurred to be accompanied with cuspal fracture. 4. The crack of restored teeth was initiated along the pulpo-axial line angle of the cavity.
최근 국내에서는 콘크리트의 내구성능을 향상시키기 위해서 많은 연구결과들이 발표되고 있는데 특히 염화물의 확산특성과 기공율 및 기공크기의 분포와 연관하여 분석한 논문들이 많아지는 추세이다. 이때 미세구조를 분석하기 위한 방법은 수은 압입법, 가스 흡착법, 화상분석법 등이 있는데, 콘크리트 분야에서 일반적으로 많이 사용되고 있는 방법은 수은 압입법이다. 본 연구는 시멘트계 재료의 미세공극 구조를 파악하기 위해서 널리 사용되고 있는 MIP 장비를 이용하여 혼합 시멘트 페이스트와 혼합콘크리트에 대하여 공극율과 공극크기분포를 측정한 결과를 분석한 것이다. 시멘트량 $300kg/m^3$을 기준으로 W/C 35%, 40%, 45%, 50%, 55%, 60%와 고로 슬래그 미분말 60%를 치환하고 W/C 35%, 45%, 55% 및 플라이애시 30%치환하고 W/C 35%, 45%, 55% 인 시멘트 페이스트 시편에 대해서 MIP를 사용하여 3일, 7일, 28일의 공극율과 공극크기분포 등의 변화를 관찰하였으며, 장기간 수중 양생한 일반 OPC 콘크리트와 고로슬래그 미분말 60%를 치환한 혼합 콘크리트에 대해서는 W/C 40%, 45%, 50%, 그리고 결합재량은 $300kg/m^3$, $350kg/m^3$, $400kg/m^3$, $450kg/m^3$로 변화시킨 시편에 대해 MIP를 사용하여 미세구조를 분석하였다.
The purpose of this study was to evaluate the marginal microleakage of condensable composite resin restorations according to flowable resin lining of internal cavity wall. The eighty extracted human molar teeth without caries and/or restorations are used The experimental teeth were randomly assigned into four groups of ten teeth each. Eighty caries-free extracted human molars were used in this study. The conventional class II cavities (box-shaped on mesial and distal surface, faciolingual width : 3mm, gingival wall depth : 1.5mm) were prepared 1mm below cementoenamel junction with a # 701 carbide bur. The teeth were divided into four groups, and then each group were subdivided into A & B group according to flowable resin & compomer lining ; Group 1-A : Tetric Ceram filling, Group 1-B : Tetric Flow lining and Tetric Ceram filling, Group 2-A Ariston pHc filling, Group 2-B : Tetric Flow lining and Ariston pHc filing, Group 3-A SureFil filling, Group 3-B : Dyract Flow lining and SureFil filling, Group 4-A : Pyramid filling, Group 4-B : Aeliteflo lining and Pyramid filling. To simulate as closely as possible the clinical situation during retoration placement, a "restoration template" was fabricated, and the condensable resin was filled using a three-sited light-curing incremental technique. All the materials used were applied according to the manufacturers' instructions. The specimens were stored in the 100% humidity for 7 days prior to thermocycling (100 thermal cycles of 5~55$^{\circ}C$ water with a 30-second dwell time) The specimens were immersed in 2% metyleneblue dye for 24 hours, and then embedded in transparent acrylic resin and sectioned mesiodistally with diamond wheel saw. The degree of marginal leakage was scored under stereomicroscope ($\times$20) and the data were analyzed by Kruskal-Wallis test and Wilcoxon signed ranks test. The results were as follows : 1. In the gingival margins of all the group, microleakage of subgroup B was less than subgroup A. 2. In the group 1, 2, 4, there was significant differences between subgroup A and B (p<0.05), but in the group 3, there was not significant different between group 3-A (SureFil) and group 3-B (Dyract flow/SureFil) (p>0.05). 3. In the subgroup A and B, there was significant different between all group except group 4 of subgroup A. From the results above, it was suggested that the cavity lining of flowable resin and flowable compomer in condensable resin restoration decrease microleakage at gingival margin, and does improve their ability to seal the gingival margin of class II preparation.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.