• Corrosion Science and Technology
• /
• v.6 no.5
• /
• pp.239-244
• /
• 2007

Corrosion protection of automotive steels has traditionally been assured by using a zinc phosphate metal pretreatment followed by the deposition of a cathodic electrocoat system. This system has been developed and optimized over the years into a highly robust and dependable system with a high performance. However, in terms of efficiency and use of resources and energy, the need is now felt to develop a simpler system with fewer steps, shorter lines, less energy requirements (curing and e-coat deposition) and less stringent waste disposal requirement (phosphate sludge). We report here on the development of a one-step system that can possibly replace both the zinc phosphate and the e-coating processes. Such a system is based on the so-called superprimer concept that we have recently developed for the replacement of chromate pretreatment and chromate-containing primers in the aerospace industry. With some modifications, such systems can also be adapted for use in the automotive industry.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.769-772
• /
• 2004

Very-Early-Strength Latex-Modified Concrete(VESLMC) provides the repairing material with short curing time as well as excellent bond strength, flexural strength and impermeability against water and chloride. In 2001, VESLMC introduced in Korea and improved superior material through research and development on material properties and durability. In 2003, the field test progressed for study problems of VESLMC field application. This paper introduced equipment improvement for bridge deck repair save both repair time and labor, while producing quality VESLMC structures.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.723-726
• /
• 2004

Porous polymer concrete can be applied to roads, sidewalks, river embankment, drain pipes, conduits, retaining walls, yards, parking lots, plazas, interlocking blocks, etc. This study is to examine a content ratio of polypropylene fiber to improve bending strength, impact resistance and freezing and thawing rssistance of porous polymer concrete. Also, this study is performed to develop the porous polymer concrete using recycled coarse aggregate and blast furnace slag for application of structures needed permeability. At 7 days of curing, compressive strength, flexural strength, water permeability and flexural load are in the ragge of $17\~21MPa,\;5\~7MPa,\;4.1\times10^{-2}\~7.7\times10^{-2}cm/s$, respectively. It is concluded that the recycled aggregate can be used in the porous polymer concretes.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.445-448
• /
• 2004

Recently, bridge deck overlay with latex modified concrete is widely applied in domestic. the capacity of bridge deck overlay depends on bond state on the surface. factors that have an effect on bond state are clean condition on the surface, absence of surface microcracking, absence of laitance, overlay curing. In this study, it is researched that characteristic of bond strength according to moisture condition on the surface and the removal method of concrete. As a result, it shows high bond strength in dry condition when w/c is $31\%$ and in moisture condition when w/c is $38\%$ respectively. characteristic of bond strength according to the removal method of concrete shows high bond strength when using water-jets rather than jackhammers.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.83-84
• /
• 2017

In the construction site, it is necessary to estimate the compressive strength of concrete in order to adjust the demolding time of the form, and establish and adjust the construction schedule. The compressive strength of concrete is determined by various influencing factors. However, the conventional method for estimating the compressive strength of concrete has been suggested by considering only 1 to 3 specific influential factors as variables. In this study, seven influential factors (W/B ratio, Water, Cement, Fly ash, Blast furnace slag, Curing temperature, and humidity) of papers opened for 10 years were collected at three conferences in order to know the various correlations among data and the tendency of data. The purpose of this paper is to estimate compressive strength more accurately by applying it to algorithm of the Deep learning.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.1 no.1
• /
• pp.125-132
• /
• 1997

This study was intended to investigate the effects of epoxy grout on compressive strength for damaged concrete structures. For this purpose, concrete molds were manufactured and tested for compressive strength at 28 days after water curing. Two kinds of Korea-made and one Japan-made epoxy grouts were injected into the broken concrete molds with the automatic low-pressure injecting method or the hand injecting method.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.2
• /
• pp.141-146
• /
• 2016

In this study, electrophoretic paint (E-paint) was deposited on the knife-abraded surface of AZ31 magnesium alloy (AZ31), and its adhesion and corrosion resistance were examined by tape peel-test and salt spray test, respectively. E-paint started to deposit on AZ31 Mg alloy after an inductance time and pores were found in the E-paint layer which is ascribed to hydrogen bubbles generated on the surface during the painting process. The pores disappeared after curing for 15 min at $160^{\circ}C$. The E-paint on AZ31 exhibited good adhesion after immersion in deionized water for 500 h at $40^{\circ}C$. The E-paint sample without scratch showed no corrosion after 1500 h of salt spray test. However, on the scratched sample, blisters were visible adjacent to the scratched sites after 500 h of salt spray test.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.05b
• /
• pp.65-68
• /
• 2009

Recently, as architectural concrete structures become high-rise and megastructured, concrete become high-strengthened and, by ensuring products of more stability, and rationalization of construction are required.large cross-sectional precast concrete members such as columns show large temperature increase in manufacturing process not only by external heating but also by concrete itself's hydration heating. Therefore, it is expected that specimen for management to predict strength and compression strength of precast concrete member shows different strength characteristics. Concerning this, in order to suggest strength characteristics of high strength mass concrete suitable for precast concrete application, this study comprises the inclusive investigations on the relations between core strength and the strength characteristics per member cross-section dimensional value and per water-bonding material ratio value.

• Macromolecular Research
• /
• v.16 no.2
• /
• pp.149-154
• /
• 2008

UV-curable electrolytes inks were prepared by dissolving [2-[(methacryloyloxy)ethyl]dimethyl]propylaminium bromide (MEPAB), 1,5-[bis(2-methacryloxyethyl)dimethyl ammono]penthane dibromide (MDAPD), hexafunctional reactive oligomer (SP1013), trimethylolpropane triacrylate (TMPTA) and a photoinitiator in methanol/2-methoxyethanol. The compositions of the electrolyte inks were MEPAB/MDAPD/SP1013/TMPTA=6/24/17.2/12.8, 15/15/17.2/12.8 and 24/6/17.2/12.8. Humid-membranes were deposited on a gold electrode/alumina electrode using an ink-jet printer equipped with a UV lamp followed by immediate UV curing. The humidity-sensing characteristics including hysteresis, frequency and temperature dependence, response time and water durability were estimated.

• Textile Coloration and Finishing
• /
• v.9 no.6
• /
• pp.79-86
• /
• 1997

The microcapsule for thermochromism is based on the polymerization reaction between epoxy resin and amine curing agent. The preparation process of microcapsule is based on dissolving or dispersing a hydrophobic core materials[one-dye-black(OBD), bis-phenol A(BPA), cetyl alcohol] in an aqueous solution of gelatin, epoxy resin and isophorondiamine(IPDA) ; the gelatin and IPDA used as a dispersion stabilizer and an hardening agent, respectively. The structures of epoxy resin and microcapsule materials have been analyzed by FT-IR and UV/Vis spectra. The mean diameter and size distribution of microcapsule are 1.46~1.75${\mu}{\textrm}{m}$ and 1.42, respectively. The DSC thermograms of microcapsules indicated 2 kinds of endothermic peaks at 47 and 322$^{\circ}C$. This is possibly corresponding to the melting peak of core material and wall meterial. These microcapsules are applied to the fabric by printing. Complex finished fabric showed a good wear resistance on rubbing test and the print pattern to the cotton fabric showed a reversible thermochromism ; ${\mu}_{max}$ are 580 nm below 4$0^{\circ}C$ and 276.5nm above 4$0^{\circ}C$ in ethanol/water(2/8), respectively.