• Journal of the Korean Ceramic Society
• /
• v.18 no.1
• /
• pp.13-22
• /
• 1981

This study is to investigate the effective mineralizer in the manufacture of forsterite porcelain as a high frequency insulator. A mixture of $Mg(OH)_2$. and $SiO_2$.($\alpha$-Quartz) corresponding to the molar ratio of 2.0 MgO: 1.0 $SiO_2$ was prepared from the materials of high purity. It was heated to 140$0^{\circ}C$ at the rate of 20$0^{\circ}C$/hr, which was kept constantly for 1 hour, and one has made chamotte after cooling. Six kinds of glasses were prepared by an 0.1 atomic equivalent of K ions substitution-Ba, Bi, Zn, Cd, Zr-to the basic K-glass (0.333 $K_2O$.1.14 $SiO_2$) and were melted approximately at 150$0^{\circ}C$. The forsterite bodies were provided by adding each glass (10, 15, 20, 25, 30%) to the forsterite chamotte, which was fired at 1320, 1360, 1400, 144$0^{\circ}C$. (1 hr). One has examined the physical and dielectric properties for the specimens. The results of the experiments are as follows; 1. As for water absorption: Bodies were better vitrified with an addition and temperature change of Ba, Bi, Zn-glasses. The specimen containing Cd-glass showed deviation of slow decreasing, where as K-glass was completely not vitrified. 2. Bodies containing Ba, Zn, Bi-glasses appeared comparatively high Modulus of Rupture at 136$0^{\circ}C$, while containing Zr-glass had the highest Modulus of Rupture as the addition changes remarkably at 140$0^{\circ}C$. 3. It was estimated that 20-25% glass present in a forsterite bodies were in good conditions as for physical properties. 4. Specimens of Ba, Bi, Zr-glasses were superior as for dielectric properties, where among Ba-glass was most excellent. 5. Dielectric constant commonly increases in a slight gradient as firing temperature rises. 6. The petrographic examination showed that the bodies containing Ba, Bi-glasses had fine crystals, and were observed distinctly large mosaic crystals in the Zn-glass.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.57-60
• /
• 2000

In this paper, it is purpose to develop a pulsed $CO_2$ laser with stable output at pulse repetition rate range of 2 KHz. We used a IGBT as a switching device. The laser cavity was fabricated as an axial and water cooled type. It was used a ring blower to increase a cooling effect The laser performance characteristics as parameters, such as pulse repetition rate, gas pressure have been investigated. The experiment was done under 3 electrode-type instead of 2 electrode-type. To achieve 3 electrode-type, we used two pulse-transformers which is operated parallel. As a result, the maximum output was about 28 W at the total pressure of 20 Torr, the gas mixture $Co_2$:$N_2$:He=1:9:15 and the pulse repetition rate of 1300 Hz.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.2
• /
• pp.131-136
• /
• 2012

This paper investigated the combustion and exhaust gas characteristics of gasoline direct injection engines for various cooling water temperature. The engine-out nanoparticle emission number and size distribution were measured by a DMS-500 equipped upstream of the catalyst. A CLD-400 and an HFR-400 were equipped at the exhaust port to analyze the cyclic NOx and total hydrocarbon emission characteristics. The results showed that the nanoparticle emission number greatly increased at low coolant temperatures and that the exhaust mainly contained particulate matter of 5.10 nm. THC also increased under low temperature conditions because of fuel film on the combustion chamber. NOx emissions decreased under high temperature conditions because of the increase in internal exhaust gas recirculation. In conclusion, an engine management system control strategy for driving coolant temperature up rapidly is needed to reduce not only THC and NOx but also nanoparticle emissions.

• Korean Journal of Food Science and Technology
• /
• v.25 no.4
• /
• pp.391-394
• /
• 1993

For the automation of Tackjoo fermentation, a sensor measurable gas production during brewing and a controller were built. The performance tests were carried out at 10 litter Tackjoo fermentor, The sensor was consisted of a transparent acryl cell for bubble formation and photo-interrupter for the detection of bubbles of 0.018ml size. The fermentation controller was fabricated with a single chip microcomputer (MC68705R3) and provided with both the monitoring module of temperature measurement and the valve controling device for the cooling water circulation in coil type heat exchanger. The operation programs were developed and systemized in ROM. With this computer system, the gas production amount and rate were acquired during the Tackjoo fermentation. The fermentation curve based on the gas production rate showed a good agreement with that of alcohol concentration. The maximum rate of gas production was found after 24 hr at $30^{\circ}C$. The correlation equation between the gas production and alcohol concentration was established and used as the control algorithm of the fermentation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.12 no.4 s.27
• /
• pp.267-272
• /
• 2006

Butterfly valves have been used for shut-off and throttling-control application in many industrial fields. Recently, they are frequently used for cooling water, oil system and ballast piping system of many larger vessels. They are especially suited for flow throttling control of heat exchangers in engine room. Measurement by the PIV(Particle Image Velocimetry) was conducted to investigate the flow characteristics of butterfly valve inserted within circular pipe. Flow behaviors such as instantaneous and time-mean velocity vectors are investigated. Furthermore, to reveal systematic performance of the butterfly valve, wall pressure was measured at 6 points along the pipe by digital manometer. As the valve position moves to the closed side, flow separation increases and persists its tendency downstream until smoothly uniform flow developed. The pressure loss is found to be about zero for the disk open angles less than 45 degrees, but is substantially increased for those larger than 60 degrees.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.5
• /
• pp.69-76
• /
• 2010

In this study, the solar thermal and geo-source heat pump(GSHP) hybrid system for heating and cooling of Zero Energy Solar House(ZESH) was analyzed by experiment. The GSHP in this hybrid system works like as aback-up device for solar thermal system. This hybrid system was designed and installed for Zero Energy Solar House (KIER ZeSH) in Korea Institute of Energy Research. The purpose of this study is to find out that this system is optimized and operated normally for the heating load of ZeSH. The analysis was conducted as followings ; - the thermal performance of facade integrated solar collector - the on/off characteristics of solar system and GSHP - the contribution of solar thermal system. - the performance of solar thermal and ground source heat pump system respectively. - the meet of thermal load (space and water heating load). This experimental study could be useful for the optimization of this system as well as its application in house. This hybrid system could be commercialized for the green home if it is developed to a package type.

• Korean Journal of Food Science and Technology
• /
• v.52 no.4
• /
• pp.357-362
• /
• 2020

This study was conducted to investigate the effects of mushroom composition (0, 4, 8, and 12%) on the quality characteristics of an extruded meat analog. The meat analog blend was isolated soy protein, wheat gluten, and corn starch (50:40:10). The extrusion condition was set to 55% feed moisture, 170℃ barrel temperature, and 150 screw speed by high moisture extrusion using a twin-screw extruder equipped with a cooling die. The integrity index, hardness, cohesiveness, springiness, chewiness, and cutting strength of the meat analog increased with the increasing mushroom content, while its water holding capacity and nitrogen solubility index (NSI) decreased. The protein digestibility decreased with the increasing mushroom content, while the DPPH radical scavenging activity significantly increased. In conclusion, the incorporation of mushrooms into the investigated meat analog enhanced its texture and antioxidant level.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.5
• /
• pp.435-442
• /
• 2011

This study was conducted to optimize the processing of high quality surimi gel from unmarketable cultured bastard halibut Paralichthys olivaceus. According to endogenous enzyme activity and processing optimization, high quality surimi gel from unmarketable cultured bastard halibut was prepared by mixing 3.0% (w/w) salt, 2.4% (w/w) starch, 5.0% (w/w) egg white and 4.8% (w/w) ice water in a Stephan mixer, set at $5^{\circ}C$ for 24 h, followed by boiling for 30 min, and finally cooling for 30 min. The strength of the surimi gel from unmarketable cultured bastard halibut prepared by the above processing method was $1,257\;g{\times}cm$, which was 33% higher than that of a commercial surimi gel from Alaska pollock, grade SA.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.5.1-5.1
• /
• 2010

One of the most important environmental problems is global warming. Global warming is caused by increase in the amounts of water vapor, methane, carbon dioxide and other gases being released into the atmosphere as a result of the burning of fossil fuels. It has thus become important to reduce fossil fuel use. Environmentally friendly preparation of functional materials has, therefore, attracted much interest for environmental problems. Furthermore, nature mimetic processes are recently been of great interest as environmentally friendly one. There have been many studies on fabrication of various functional nanocrystals. Among various nanocrystal fabrication techniques, flux growth is an environmentally friendly, very convenient process and can produce functional nanocrystals at temperatures below the melting points of the solutes. Furthermore, this technique is suitable for the synthesis of crystals having an enhedral habit. In flux growth, the constituents of the materials to be crystallized are dissolved in a suitable flux (solvent) and crystal growth occurs as the solution becomes critically supersaturated. The supersaturation is attained by cooling the solution, by evaporation of the solvent or by a transport process in which the solute is made to flow from a hotter to a cooler region. Many kinds of oxide nanocrystals have been grown in our laboratory. For example, zero- (e.g., particle), one- (e.g., whisker and tube) and two-dimensional (e.g., sheet) nanocrystals were successfully grown by flux method. Our flux-growth technique has some industrial and ecological merits because the nanocrystal fabrication temperatures are far below their melting points and because the used reagents are less harmless to human being and the environment.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.957-966
• /
• 1996

An attempt was made to measure the availability of waste heat, released from the cooling system of a small engine, which can be utilized for grain drying. An engine powered flat-bed rough rice dryer was constructed and the performance of the dryer with available engine-waste heat was analyzed for 10 , 20, 30 and 40 cm rough rice bulk depths with a constant dryer base area of 0.81$m^2$/min. The waste heat was sufficient to increase the drying air temperature 7 to 12$^{\circ}C$ at an air flow rate of 8.8 to 5.7㎥/min, while the average ambient temperature and relative humidity were 24$^{\circ}C$ and 70%. The minimum energy requirement was 3.26 MJ/kg of water removed in drying a 40 cm deep grain bed in 14h. A forty to fifty centimeter deep grained seems to be optimum in order to avoid over-drying in the top layers. On the basis of minimum energy requirement (3.26 MJ/kg ) , an estimation was made that the waste heat harvest from an engine of a power range of 1 to 10.5PS can dry about 0.1 to 1 metric on of rough rice from 23% to 15% m.c. (w.b) in 12 h at an average ambient temperature and relative humidity of $25^{\circ}C$ and 80%, respectively. The engine-waste heated grain dryer can be used in the rural areas of non industrialized countries where electricity is not available.