• 농업과학연구
• /
• 제51권3호
• /
• pp.307-314
• /
• 2024

This study investigated the relationship of electrical conductivity and color to water loss and shear force of pork loin. In addition, the differences in quality properties with the sex and carcass grades were investigated. There were no differences in drip loss, cooking loss, and total loss of pork loin between barrow and gilt (p > 0.05). The shear force of pork loin was lower in barrow than in gilt (p < 0.05). The quality properties of pork loin did not differ among the carcass grades (1⁺, 1, and 2). The electrical conductivity measured at 45 min, 3 h, and 12 h had no noticeable correlation coefficients with the quality properties of pork loin. The L^*, a^*, and b^* values correlated significantly with cooking loss and total loss. The highest correlation coefficient was 0.45 between L^* and total loss. From the results, we conclude that the electrical conductivity and color values are not suitable variables for predicting pork loin quality. Therefore, further study to develop ways for predicting the pork quality during the grading of pork carcasses is required.

• 한국안전학회지
• /
• 제18권1호
• /
• pp.14-18
• /
• 2003

The structural development of air-water bubble plumes has been measured under different condition on air flow rate in a cylindrical bath. The time-averaged structure of plumes has been measured with an oscilloscope and an electro-conductivity probe. The temperature of bubbles was also obtained by a thermal-infrared camera. Gas volume fraction and bubble frequency were high since bubbles concentrated on the nozzle. In general, their axial and radial values tended to decrease with increasing distance. Bubble temperature reached water temperature within a short time. The present study showed that thermal equilibrium between bubbles and water was completed before bubbles flow became stable.

• 펄프종이기술
• /
• 제33권5호
• /
• pp.12-20
• /
• 2001

The consequence of water system closure and reduced water consumption in Paper Mills is increased white-water conductivity associated with increased total dissolved solids. This leads to difficulties man-aging the wet end chemistry of paper machines, mainly due to stearic hindrance effects on wet end chemical additives. This in turn causes poor productivity and Inefficient chemicals usage. The success of a number of projects is reported. The application and development of new multi-component micro-particle systems which can further assist in achieving a significant degree of system closure or Zero Effluent is described.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.1012-1018
• /
• 2006

In this study, the insulation performance of thermal insulation materials such as glass wool, polyetylene and flexible lastomeric foam according to water vapor permeance was estimated by using experimental correlation equation. The results showed the conductivity increment of flexible lastomeric foam which has very low-permeability (${\le}0.15[ng/{\cdot}s{\cdot}Pa]\;or\;{\mu}{\ge}1,000$) is about 50% lower than that of glass wool with the lapse of ten years. The conclusion is that moisture inevitably accumulated in permeable Insulations reduces insulation performance and also accelerates surface condensation in the case of cold water system.

• 유기물자원화
• /
• 제23권4호
• /
• pp.95-103
• /
• 2015

본 연구에서 목적은 열가수분해 반응기에 최적설계를 위해 반응온도에 따른 도계폐기물의 열전도도를 정량하는 것이다. 이에 반응온도에 따른 탈수슬러지의 열전도도를 연속적으로 정량한 결과, 반응온도가 증가할수록 열가수분해 반응에 의한 고온, 고압에 의해 슬러지가 열적으로 가용화된다. 따라서, 슬러지 세포내에 결합수가 자유수로 용출되어 고상의 탈수슬러지가 액상의 슬러리로 상태가 변화된다. 그 결과 반응초기인 반응온도 $20^{\circ}C$에서 도계슬러지에 열전도도가 물에 비해 2.11배정도 낮지만 $200^{\circ}C$에서는 도계슬러지의 열전도도가 $0.677W/m{\cdot}^{\circ}C$로 물과 유사하다. 따라서 열가수분해에 의한 슬러지의 물리적 특성변화는 열전달 효율에 매우 중요한 인자임을 확인하였고, 열가수분해반응기 최적 설계를 위한 경계조건으로 실험 측정값과 일치도가 99.69%인 반응온도에 따른 열전도도 함수를 도출하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.497-504
• /
• 1999

This study presents the physical and engineering characteristics of soil-bentonite admixed liner in I landfill. Main focus was the hydraulic conductivity of compacted soil-bentonite admixed and mechanisms governing low permeable properties of the admixed liner. Laboratory and field tests such as compaction, hydraulic conductivity, density, water content for the soil-bentonite admixed liner were carried out. Quality control criteria for the best construction of the soil-bentonite admixed liner was suggested through laboratory and field test results.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.215-218
• /
• 1998

The thermal stability of polyaniline-camphorsulfonic acid(PANI-CSA) film was studied as a function of temperature and time. A decrease in electrical conductivity of PANI-CSA film occurred when PANI-CSA film is subjected to temperature above 60$^{\circ}C$. From the result of thermogravimetry (TG), it was thought that the deterioration in electrical conductivity of PANI-CSA film was due to evaporation of water and residual solvent.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 추계학술발표회
• /
• pp.99-101
• /
• 2003

Unsaturated hydraulic conductivity models have been widely used for the numerical modeling of water flow and contaminant transport in soils. In this study, a simple hydraulic conductivity model is developed by using information of particle-size distribution from the lognormal distribution model and its results are compared with those from the Kosugi-Mualem (KM) model. The accuracy of the proposed model is verified for observed data chosen from the international UNSODA database. Results showed that the proposed model produces adequate predictions of hydraulic conductivities. Performance of this model is generally better than the KM function.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.946-951
• /
• 1998

In order to calculate the thermal stresses of massive concrete structures in non-steady state conditions the thermal properties of the materials have to be well known. Structural materials such as concrete, rock and soil are heterogeneous, damp and porous so that measurements of their thermal properties by conventional methods would result in large errors. In this study, thermal conductivity was measured by the device, QTM-D3 which is usually used in Japan. Variables are chosen as age, water content, temperature, aggregate content, S/A ratio and type of cementitious materials. Finally a model for thermal conductivity was proposed.

• 한국환경과학회지
• /
• 제31권4호
• /
• pp.341-356
• /
• 2022

Electrical Conductivity (EC) or Total Dissolved Solids (TDS) has been often used to evaluate the water quality in some water education program for children and youth. This study attempted to find out whether EC (or TDS) can be used as a water pollution criteria in water education program. To clarify it, we used the water analysis data of July 2019 and January 2020 from Water Environment Information System. Data from 332 points in Han-river were used to investigate correlation between the parameters, such as BOD, COD, TN, TP vs EC. Correlation(r) for all data of BOD vs. EC was 0.347 for July 2019 and 0.483 for January 2020. No correlation was observed for BOD Ia and BOD Ib for July 2019 (r=-0.041, -0.030, respectively) and BOD Ia for January 2020 (r=0.041). Better correlation for all data of COD vs. EC was obtained (r=0.543 for July 2019 and r=0.610 for January 2020). However, no correlation was observed for COD Ia for January 2020. High vlaue of EC or TDS does not always mean water pollution, especially for clean water environment. Thus, EC (or TDS) alone can not be used as a water pollution criteria.