• New & Renewable Energy
• /
• v.7 no.1
• /
• pp.22-28
• /
• 2011

The surface solar radiations were calculated and analyzed with spatial resolutions (4 km and 1 km) using by GWNU (Gangneung-Wonju National University) solar radiation model. The GWNU solar radiation model is used various data such as aerosol optical thickness, ozone amount, total precipitable water and cloud factor are retrieved from Moderate Resolution Imaging Spectrometer (MODIS), Ozone Monitoring Instrument (OMI), MTSAT-1R satellite data and output of the Regional Data Assimilation Prediction System(RDAPS) model by Korea Meteorological Administration (KMA), respectively. The differences of spatial resolutions were analyzed with input data (especially, cloud factor from MTSAT-1R satellite). And the Maximum solar radiation by GWNU model were found in Andong, Daegu and Jinju regions and these results were corresponded with the MTSAT-1R cloud factor.

• Atmosphere
• /
• v.18 no.4
• /
• pp.417-427
• /
• 2008

In this paper, we analyzed the physical and thermodynamic characteristics of fog by using the integrated water vapor (IWV) from Global Positioning System (GPS) networks and the regular observation data of meteorological stations in GPS sites. The cases of a radiation and an advection fog were selected as samples, the conversions of water substance from the water vapor to cloud water in fog were detected by the Bulk Water-Continuity Model, and the pattern analysis is adapted on GPS IWV, temperature, wind and relative humidity. Under the specific hypothesis (saturation and stable), GPS IWV could detect quantitatively the phase changing between the water vapor and cloud water content with condensation/evaporation during the formation and dissipation of fog. After it reaches to the saturation, the relative humidity can be a limited indicator for fog. However, GPS IWV can detect the status change of fog even after the saturation. It has indicated that GPS IWV could be a new observing technique for the processes of the fog formation and the dissipation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.7
• /
• pp.660-663
• /
• 2016

This paper presents the effect of vegetation layer and radar parameters on soil moisture measurement using the vegetation layer scattering model and surface scattering model. The database of backscattering coefficients for various vegetation layer densities, incidence angles, frequencies, and polarizations is generated using $1^{st}$-order RTM(Radiative Transfer Model). Then, surface soil moisture contents were estimated from the backscattering coefficients in the database using the WCM(Water Cloud Model) and Oh model. The retrieved soil moisture contents were compared with the soil moisture contents in the input parameters of the RTM to estimate the retrieval errors. The effects of vegetation layer and radar parameters on soil moisture measurement are analyzed using the retrieval errors.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.3
• /
• pp.343-355
• /
• 2005

Cloud/fog water was collected at Daegwallyeong, a typical clean environmental area, by using an active fog sampler during the foggy period in 2002, The pH ranged from 3,7 to 6,5 with a mean of 5,0, but the pH calculated from average concentrations of $H^+$ was 4.4. $SO_4^{2-},\;NO_3^-\;and\;NH_4^+$ were predominant ions with average concentrations of 473,3, 463,3 and $576,0\;{\mu}eq/L$, respectively, This showed that cloud/fog water was slightly acidified, but the concentrations of major pollutants were as high as those for polluted area, suggesting effect from long range transported pollutants, Samples were categorized into four groups (E, W, S, N) by applying 48-h back trajectory analysis using the Hybrid Single-Particle Largrangian Integrated Trajectory (HYSPLIT) model. Concentrations of seasalt $(Na^+\;and\;Cl^-)$ were the highest for group E, indicating large input of seasalts by air masses transported from the East Sea. The concentrations of $SO_4^{2-}$ were slightly higher in group W but the difference was not significant. However, the concentrations of $NO_3^-$ were significantly higher in group W than those in other three groups, The median values of cloud/fog water pH for group N and W were below 4,5, which is significantly lower than median values in group E and group S, This suggests that the acidifying pollutants were transported from the Asia continents and Seoul metropolitan area cause acidification of the cloud/fog water in Daegwallyeong.

• Journal of Environmental Science International
• /
• v.30 no.12
• /
• pp.1027-1039
• /
• 2021

In this study, we investigated the optimal meteorological conditions for cloud seeding using aircraft over the Korean Peninsula. The weather conditions were analyzed using various data sources such as a weather chart, upper air observation, aircraft observation, and a numerical model for cloud seeding experiments conducted from 2018 to 2019 by the National Institute of Meteorological Sciences, Korea Meteorological Administration. Cloud seeding experiments were performed in the seasons of autumn (37.0%) and winter (40.7%) in the West Sea and Gangwon-do. Silver iodide (70.4%) and calcium chloride (29.6%) were used as cloud seeding materials for the experiments. The cloud seeding experiments used silver iodide in cold clouds. Aircraft observation revealed relatively low temperatures, low liquid water content, and strong wind speeds in clouds with a weak updraft. In warm clouds, the cloud seeding experiments used calcium chloride. Observations included relatively high temperatures, high liquid water content, and weak wind speeds in clouds with a weak updraft. Based upon these results, we determined the comprehensive meteorological conditions for cloud seeding experiments using aircraft over the Korean Peninsula. The understanding of optimal weather conditions for cloud seeding gained from this study provide information critical for performing successful cloud seeding and rain enhancement.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.102-102
• /
• 2019

토양수분은 수문 및 기상 현상의 주요 요인으로 가뭄, 홍수 및 범람과 같은 자연 재해와 관련이 깊은 인자이다. 이러한 토양수분의 관측 기술 중 위성 데이터를 활용한 원격탐사 기술은 광범위한 지역의 관측이 용이하고 지점이 아닌 공간 데이터를 제공하는 장점을 지니고 있어 토양수분의 관측에 유리하다. 특히 높은 해상도의 위성기반 토양수분 데이터는 토양수분의 변동성이 큰 지역의 수문, 기상학적 현상을 보다 자세히 분석할 수 있게 해주며 가뭄 및 범람과 같은 수자원 관련 재해를 정확하게 분석하는데 요구된다. 이로 인해 최근 Sentinel-1 위성에서 운용중인 Synthetic Aperture Radar(SAR) 데이터를 이용한 매우 높은 공간해상도(10m~1km)를 지니고 있는 토양수분데이터 생산에 관한 연구가 세계적으로 활발히 진행되고 있다. 그러나 국내에서는 Sentinel-1 위성을 이용한 토양수분 데이터 복원에 관한 연구가 미비한 실정이다. 따라서 본 연구에서는 파주 감악산 설마천 유역에서의 Sentinel-1 위성의 SAR 데이터를 이용한 고해상도 토양수분 데이터를 복원하고자 한다. 파주 설마천 유역은 감악산 일대로 경사가 심하고 식생이 두터운 산악지형이다. SAR를 이용하여 산지에서 신뢰성 있는 토양수분 자료를 복원하기 위해서는 가장 큰 오차의 원인으로 작용하는 경사와 식생을 고려하여야 한다. 먼저 표면 경사의 영향의 경우 SAR 센서의 레이더 입사각과 수치 표고 모델을 이용하여 고려하고자 한다. 다음 과정으로 표면 경사가 고려된 Sentinel-1 데이터의 후방산란계수와 Landsat-8 데이터 및 지점 토양수분 데이터를 이용하여 식생에 따른 후방산란계수의 거동을 Water Cloud Model을 이용하여 분석하였다. Water Cloud Model은 토양위의 식생의 수분이 후방산란계수에 혼동을 주는 구름과 같이 작용한다고 가정하고 식생수분을 후방산란계수와 레이더 입사각 및 식생지수를 통해 계산하는 모델이며 이를 이용하여 토양수분 복원에 있어 식생의 영향을 제거하고자 하였다. 이를 통해 식생과 표면 경사를 고려하여 복원된 토양수분 데이터를 설마천 유역의 지점 데이터와 비교 분석하고 다른 위성기반 토양수분 데이터 및 강우 데이터를 이용하여 평가하였다. 본 연구결과를 통해 한반도 산지에서의 SAR 데이터를 이용한 토양수분 복원 기술의 기초가 마련될 것이며 이를 통해 산지가 대부분인 한반도의 토양수분 거동을 이해하는데 유용한 자료를 제공할 수 있을 것으로 기대된다. 본 연구 이후에는 연구결과분석을 통한 산지에서의 고해상도 토양수분 복원 알고리즘을 분석, 보완하고 한반도에서의 SAR 기반 토양수분 데이터의 정확도를 높이는 연구가 진행되어야 할 것이다.

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.5
• /
• pp.335-343
• /
• 2006

Design changes for an original surface model are frequently required in a manufacturing area: for example, when the physical parts are modified or when the parts are partially manufactured from analogous shapes. In this case, an efficient 3D model updating method by locally adding scan data for the modified area is highly desirable. For this purpose, this paper presents a new procedure to update an initial model that is composed of combinatorial triangular facets based on a set of locally added point data. The initial surface model is first created from the initial point set by Tight Cocone, which is a water-tight surface reconstructor; and then the point cloud data for the updates is locally added onto the initial model maintaining the same coordinate system. In order to update the initial model, the special region on the initial surface that needs to be updated is recognized through the detection of the overlapping area between the initial model and the boundary of the newly added point cloud. After that, the initial surface model is eventually updated to the final output by replacing the recognized region with the newly added point cloud. The proposed method has been implemented and tested with several examples. This algorithm will be practically useful to modify the surface model with physical part changes and free-form surface design.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.1
• /
• pp.46-63
• /
• 2024

One of the biggest dangers in the globe is water contamination. Water is a necessity for human survival. In most cities, the digging of borewells is restricted. In some cities, the borewell is allowed for only drinking water. Hence, the scarcity of drinking water is a vital issue for industries and villas. Most of the water sources in and around the cities are also polluted, and it will cause significant health issues. Real-time quality observation is necessary to guarantee a secure supply of drinking water. We offer a model of a low-cost system of monitoring real-time water quality using IoT to address this issue. The potential for supporting the real world has expanded with the introduction of IoT and other sensors. Multiple sensors make up the suggested system, which is utilized to identify the physical and chemical features of the water. Various sensors can measure the parameters such as temperature, pH, and turbidity. The core controller can process the values measured by sensors. An Arduino model is implemented in the core controller. The sensor data is forwarded to the cloud database using a WI-FI setup. The observed data will be transferred and stored in a cloud-based database for further processing. It wasn't easy to analyze the water quality every time. Hence, an Optimized Neural Network-based automation system identifies water quality from remote locations. The performance of the feed-forward neural network classifier is further enhanced with a hybrid GA- PSO algorithm. The optimized neural network outperforms water quality prediction applications and yields 91% accuracy. The accuracy of the developed model is increased by 20% because of optimizing network parameters compared to the traditional feed-forward neural network. Significant improvement in precision and recall is also evidenced in the proposed work.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.100-102
• /
• 1999

We have analyzed AVHRR global data set for obtaining aerosol and cloud microphysical parameters, i. e., optical thickness and size index of particle polydispersions. From the results, it is found that the cloud optical thickness increases with increasing aerosol column number, which seems to be caused mainly by decreasing cloud particle radius, The cloud liquid water path was observed to be relatively constant without a significant dependence on the aerosol number. Further comparison of the satellite results with a general circulation model simulation.

• Atmosphere
• /
• v.33 no.5
• /
• pp.457-475
• /
• 2023

Accurately predicting localized heavy rainfall is challenging without high-resolution mesoscale cloud information in the numerical model's initial field, as precipitation intensity and amount vary significantly across regions. In the Korean Peninsula, the radar observation network covers the entire country, providing high-resolution data on hydrometeors which is suitable for data assimilation (DA). During the pre-processing stage, radar reflectivity is classified into hydrometeors (e.g., rain, snow, graupel) using the background temperature field. The mixing ratio of each hydrometeor is converted and inputted into a numerical model. Moreover, assimilating saturated water vapor mixing ratio and decomposing radar radial velocity into a three-dimensional wind vector improves the atmospheric dynamic field. This study presents radar DA experiments using a numerical prediction model to enhance the wind, water vapor, and hydrometeor mixing ratio information. The impact of radar DA on precipitation prediction is analyzed separately for each radar component. Assimilating radial velocity improves the dynamic field, while assimilating hydrometeor mixing ratio reduces the spin-up period in cloud microphysical processes, simulating initial precipitation growth. Assimilating water vapor mixing ratio further captures a moist atmospheric environment, maintaining continuous growth of hydrometeors, resulting in concentrated heavy rainfall. Overall, the radar DA experiment showed a 32.78% improvement in precipitation forecast accuracy compared to experiments without DA across four cases. Further research in related fields is necessary to improve predictions of mesoscale heavy rainfall in South Korea, mitigating its impact on human life and property.