• Journal of Korean Society on Water Environment
• /
• v.36 no.6
• /
• pp.535-545
• /
• 2020

This study aims to conserve and monitor energy use in public sewage treatment plants by utilizing data from the SCADA system and by controlling the aeration rate required for maintaining effluent water quality. Power consumption in the sewage treatment process was predicted using the equipment's uptime, efficiency, and inherent power consumption. The predicted energy consumption was calibrated by measured data. Additionally, energy efficiency indicators were proposed based on statistical data for energy use, capacity, and effluent quality. In one case study, a sewage treatment plant operated via the SBR process used ~30% of energy consumed in maintaining the bioreactors and treated water tanks (included decanting pump and cleaning systems). Energy consumption analysis with the K-ECO Tool-kit was conducted for unit processing. The results showed that about 58.7% of total energy consumed was used in the preliminary and biological treatment rotating equipment such as the blower and pump. In addition, the energy consumption rate was higher to the order of 19.2% in the phosphorus removal process, 16.0% during sludge treatment, and 6.1% during disinfection and discharge. In terms of equipment energy usage, feeding and decanting pumps accounted for 40% of total energy consumed following 27% for blowers. By controlling the aeration rate based on the proposed feedback control system, the DO concentration was reduced by 56% compared pre-controls and the aeration amount decreased by 28%. The overall power consumption of the plant was reduced by 6% via aeration control.

• Journal of the Korean association of regional geographers
• /
• v.15 no.3
• /
• pp.351-368
• /
• 2009

The internal structure of gateway city is to be influenced by the external relations. The purpose of this study is to examine the transportation impacts on the spatial characteristics of gateway cities in the Geum River basin, Korea. The changes of the transportation is classified by the commodity, the rice flow, and the functions of the gateway are examined in Gunsan-Si and Ganggyeong-Eup. Major findings of the study are as follows. First, the water and land transports in the gateways are connected or not. In the flow of the rice, the Gunsan gateway is connected, while the Ganggyeong is not. The difference is reflected in the location of the port and railway station. In the flow of marine products and salt, the Ganggyeong gateway is connected, while the Gunsan is not. Second, there had been separated or not in the location of the ports of the marine products and the rice. They are separated in the Gunsan, while not separated in the Ganggyeong. The results imply that there are to be difference between the two ports after the gateway of rice.

• Journal of Korea Water Resources Association
• /
• v.47 no.9
• /
• pp.801-812
• /
• 2014

In this study, average rainfall of basin was estimated and compared with that obtained from Biseulsan dual polarization RADAR. And the runoffs are estimated using Vflo distribution model for Habcheon reservoir basin and Huicheon basin. In the rainfall estimation using dual polarization RADAR, the rainfall was estimated by using the specific phase difference and differential reflectivity of dual polarization RADAR variables. As a result, for all events rainfall estimation using dual polarization RADAR has the closest value to the gauge rainfall in terms of the peak rainfall and total rainfall. Also, runoff simulation results from dual polarization RADAR show the better results. It is concluded that the method using dual polarization radar can improve the accuracy more than a single polarization radar using only horizontal reflectivity.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.211-216
• /
• 2006

Within the frame of the MERCOSUR (South Common Market), one of the most important goals to achieve by its member states is a better cost effective international cargo transportation system. For this purpose the project of developing a commercial waterway linking the east region of Uruguay with the south of Brazil has been under study for a number of years now. Because of the high costs involved on the development of such waterway, the project has been indefinitely delayed. It is our intention to show an alternative way to reduce the present obstacles by using a budget oriented approach in order to determine the vessel best suited to use on the proposed waterway. So far, every study related to the project has been focused on the amount of work needed to modify the environment in order to accommodate the hardware already available in the region. The conclusions show that the cost of opening and maintaining the required navigation channel is high enough to discourage investment; the added responsibility to take care of any environmental damage incurred during the building and/or operation of the waterway makes searching for a less costly and hazardous option an interesting challenge. The proposed terminal on the Cebollat? River would be located at the heart of the Uruguayan rice growing region. Uruguay exports 90% of its rice production, being Brazil its biggest buyer. Wood chips and clinker are the other types of cargo considered to use the proposed waterway in route to either Brazil or to overseas destinations through the deep water port of Rio Grande. Through the analysis of local data by a Geographical Information System, international regulations regarding inland waterways and shallow draught vessel characteristics, we seek to propose a cost efficient alternative to apply on this particular scenario.

• New & Renewable Energy
• /
• v.2 no.2 s.6
• /
• pp.94-101
• /
• 2006

[ $1m^3$ ] solid hydrate contains up to $200m^3$ of natural gas, depending on pressure and temperature. Such large volume of natural gas hydrate can be utilized to store and transport large quantity of natural gas in a stable condition. So, in the present investigation, experiments carried out for the formation of natural gas hydrate governed by pressure, temperature, and gas compositions, etc.. The results show that the equilibrium pressure of structure II natural gas hydrate) is approximately 65% lower and the solubility is approximately three times higher than structure I methane hydrate). Also, the subcooling conditions of the structure I and II must be above 9K and 11K in order to form hydrate rapidly regardless of gas components, but the pressure increase is more advantageous than the temperature decrease in order to increase the gas consumption. And utilizing nozzles for spraying water in the form of droplets into the natural gas dramatically reduces the hydrate formation time and increases its solubility at the same time.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.6 no.4
• /
• pp.64-70
• /
• 2015

A rapid urbanization has increased the portion of paved layer that results in the change of water circulation system. This change leads to frequent events of flooding, drought, and urban heat island. To resolve these issues, permeable pavement system based on Low Impact Development (LID) concept is being applied to international urban areas. Therefore it is necessary to establish a rational design procedure for the permeable pavement system that reflects our environmental conditions. iDue to inherent characteristics of permeable pavement system, water infiltrates thorough the layers so it may reduce the bearing capacity of sub-layers. In this study, an effort was made to investigate the effectiveness of geogrid reinforced crushed stone subbase layer based on field experimental program along with a limited numerical analysis. It reveals that geogrid reinforced sections improve the bearing capacity by close to 20%. In addition, a light weight deflectomenter (LWDT) appears to be promising for the compaction quality control of crushed stone subbase layer in order to construct qualified permeable pavement systems.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.603-607
• /
• 2008

최근 이상기후현상으로 인한 가뭄과 홍수의 빈번한 발생으로 인해 인명 및 재산피해가 증대되고 있다. 특히 도시지역에서의 홍수 피해가 심각한 상황이다. 도시지역에서는 불투수 면적의 증가로 우수 유출량의 대부분을 배수관망에 의존하고 있다. 그럼에도 불구하고 현재 배수관거에 대한 관리는 미흡한 실정으로 노후되거나 부실한 배수관을 통해 토양으로 누수되거나, 관로 내에 누적된 퇴적물로 인한 관경의 축소 등으로 인해 우수가 원활하게 배제되지 못하고 지체되면서 인근지역의 침수피해를 증가시키고 있다. 이러한 피해를 경감시키기 위해서 지속적이고 신뢰성 있는 배수관 내 유황자료의 획득이 시급한 상황이다. 그러나 현재 수집되고 있는 도시지역의 배수 자료는 하천유황자료에 편중되어있으며, 배수관망 자료는 배수관망 내 유황자료의 획득이 어렵고, 배수관망 내에서 흐름의 경로 파악이 불가능 하다는 문제점을 가지고 있다. 본 연구에서는 도시 배수관망에 대한 지리정보시스템의 자료와 ubiquitous floater로부터 획득한 유황자료를 결합하여 도시 배수 관리 시스템을 구축하는 것에 목적을 두었다. 도시 배수 관리 시스템에서는 bluetooth 무선통신 기술을 이용한 ubiquitous floater를 사용하여 배수관망 내의 유속과 흐름 경로를 측정하고, 측정된 실시간 수문자료는 CDMA 무선통신모듈을 이용하여 server 컴퓨터에 전송된다. 수집된 자료는 대상유역의 지리정보시스템의 자료와 결합하여 도시 배수 관리 시스템으로 구축된다. 도시 배수 관리 시스템은 관리자가 배수관의 특성을 파악하고 문제발생시 신속하게 조치할 수 있게 도움을 줄 수 있으며, 전문적인 지식이 없는 누구나(whoever), 언제(whenever), 어디서(wherever)든 PC 앞에서 원거리에 위치한 도시 배수관망 내의 흐름 경로를 파악하고 관망 내 흐름의 현황을 파악할 수 있다.

• Journal of Environmental Impact Assessment
• /
• v.21 no.2
• /
• pp.255-264
• /
• 2012

The present study attempts to understand the emission pattern of greenhouse gases in people's daily life through the estimation and analysis of the amount and characteristics of the greenhouse gases. Based on the survey of 1,000 people throughout the nation, monthly emission of greenhouse gases per-capita was estimated from their use of fuels, electricity, water, and personal and public transportation means in addition to their waste generation. In the case of personal car drivers, greenhouse gas emission was the greatest from their cars, followed by the emission from electricity, fuels, and public transportation. Emission from water consumption and waste generation was relatively low. Fuel consumption varied depending on the number of household members, their housing type, and the size of their living spaces. Results showed that single-person households emitted the largest amount of per-capita greenhouse gas while greenhouse gas emission from electricity was inversely proportional to the number of persons in a given household.

• Corrosion Science and Technology
• /
• v.9 no.6
• /
• pp.317-324
• /
• 2010

Marine transportation by ships is characterized by remote, large-volume and lower rates than the others carry system. Ships account for over 80% of all international trading, and marine transportation is an internationally competitive, strategic, and great national important industry. The construction of larger and faster ships has brought about many problems such as cavitations and erosion corrosion. Cavitations and erosion corrosion make damages on materials and leads to break down members due to continuous physical contacts with shock waves and fluids from the generation and extinction of air bubbles in sea water vortex. The steel used for ship constructions was spray-coated with Al wire, and additionally sealed with fluorine silicone sealing material. Results of experiment, corrosion resistance of sealed thermal spray coating was improved, however in cavitation resistance, the large effect was not appeared. Accordingly, this study applied for thermal spray coating to provide better electrochemical characteristics and corrosion resistance in marine environment.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.399-402
• /
• 2006

[ $1m^3$ ] solid hydrate contains up to $200m^3$ of natural gas, depending on pressure and temperature. Such large volume of natural gas hydrate can be utilized to store and transport large quantity of natural gas in a stable condition. So, in the present investigation, experiments carried out for the formation of natural gas hydrate governed by pressure, temperature, and gas compositions, etc.. The results show that the equilibrium pressure of structure II natural gas hydrate (is approximately 65% lower and the solubility is approximately three times higher than structure I methane hydrate). Also, the subcooling conditions of the structure I and II must be above 9K and 11K in order to form hydrate rapidly regardless of gas components, but the pressure increase is more advantageous than the temperature decrease in order to increase the gas consumption. And utilizing nozzles for spraying water in the form of droplets into the natural gas dramatically reduces the hydrate formation time and increases its solubility at the same time.