• 대한설비공학회지:설비저널
• /
• 제17권4호
• /
• pp.456-465
• /
• 1988

The performance of the cold latent heat storage is investigated by experiment and by a simplified analytic approach. The heat storage tank has eight horizontal circular tubes and one path of refrigerant evaporating tube. The phase change material in the heat storage tank is water which is frozen by evaporating refrigerant of refrigeration system and melts by the warm air in the heat storage tank. In the experiment, the performance has been studied by the various conditions including the initial water temperature on solidification and flow rate and temperature of air. The rate of recovered heat has been simulated by a simplified model and the results shows a good agreement. In solidification process, initial water temperature causes time delay corresponding to the sensible heat and it is found that the shape of evaporator is important. In melting process, the recovered heat rate from the heat storage tank is proportional to $Re^{0.8}(T_{bi}-T_f)$ of air where $T_{bi}$ and $T_f$ indicate temperatures of inlet air and phase change, respectively. And the deminishing rate of the recovered heat is higher for the higher heat rate.

• 한국농공학회논문집
• /
• 제49권3호
• /
• pp.21-31
• /
• 2007

This study is aimed at the development of a runoff forecasting model by using the Fuzzy inference system and Neural Network model to solve the uncertainties occurring in the process of rainfall-runoff modeling and improve the modeling accuracy of the stream runoff forecasting. The Neuro-Fuzzy (NF) model were used in this study. The NF model, recently received a great deal of attention, improve the existing Neural Networks by the aid of the Fuzzy theory applied to each node. The study area is the downstreams of Naeseung-chun. Therefore, time-dependent data was obtained from the Wolpo water level gauging station. 11 and 2 out of total 13 flood events were selected for the training and testing set of model respectively. The schematic diagram method and the statistical analysis are conducted to evaluate the feasibility of rainfall-runoff modeling. The model accuracy was rapidly decreased as the forecasting time became longer. The NF model can give accurate runoff forecasts up to 4 hours ahead in standard above the Determination coefficient $(R^2)$ 0.7. In the comparison of the runoff forecasting using the NF and TANK models, characteristics of peak runoff in the TANK model was higher than ones in the NF models, but peak values of hydrograph in the NF models were similar.

• 한국물환경학회지
• /
• 제22권5호
• /
• pp.905-912
• /
• 2006

In this paper, simulation methods of the system dynamics model developed by Das et al. (1997) for activated-sludge wastewater treatment plants are illustrated in an attempt to determine the operating rules and the policies related to capacity expansion of an activated-sludge wastewater treatment plant. For existing conditions, the analyses were performed by varying activated-sludge return rate to observe changes in effluent water quality and treatment efficiency. The effluent water quality is also analyzed for various average daily inflow conditions and activated-sludge return rates. As a result, without expanding the aeration tank, maximum average daily inflow that can satisfy the effluent water quality standard of BOD $0.02kg/m^3$ was determined as $2,840m^3/hr$, subject to 100% of activated-sludge return rate while other factors remain constant. When the activated-sludge return rate is less than 100%, expansion of the aeration tank is necessary and minimum sizes of the aeration tank to satisfy the effluent water quality standard were determined for various activated-sludge return rates. In addition, the total operating and maintenance as well as unit treatment cost regression equations for activated-sludge wastewater treatment plants are suggested by using the cost data that are obtained from Water and Wastewater Division, Ministry of Environment. The regression analyses showed that the economies of scale phenomena exist in the operating and maintenance costs of activated-sludge wastewater treatment plants.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.749-754
• /
• 2005

본 연구에서는 한 개의 침투 조절 요소, 두 개의 직렬탱크 및 한 개의 병렬 탱크로 구성된 개선된 형태의 TANK 모형을 제시하였다. 침투는 강우의 형태로 유역에 공급되는 물의 분배를 결정하는 과정으로서, 이를 적절히 고려할 수 있는지의 여부가 강우-유출 모형의 유효성을 판단하는 기준이 된다고 해도 과언이 아니다. 따라서 본 연구에서는 구조가 비교적 단순하고 사용이 간편하여 기존에 널리 사용되어 오던 개념적 모형인 TANK 모형에 침투 조절 요소를 도입하여 보다 합리적으로 강우-침투-유출 과정을 모의하고 해석하고자 노력하였다. 이를 통해 단순히 시간의 함수가 아닌 토양 함수량의 함수로서 침투능의 변화를 고려할 수 있으며, 유역 유출의 각 성분(지표면 유출, 중간 유출, 지하수 유출)에 영향을 미치는 모형의 매개변수에 물리적 의미를 더욱 부여할 수 있다. 또한 침투 조절 요소의 매개변수 산정을 위해 선행 강우 지수(Antecedent Precipitation Index)를 이용하였으며, 이를 통해 토양 선행 함수 상태의 고려가 가능하다. 또한 본 연구에서는 모형의 매개변수 최적화를 위해 실수 코딩 유전 알고리즘(Real Coded Genetic Algorithm)을 사용하였으며, 모형의 적용성과 유효성 검증을 위해 IHP 연구 유역인 평창강 방림 유역을 대상유역으로 하여 이 유역의 실측 호우 사상을 사용하였다. 결과적으로 계산된 수문곡선은 관측치에 비교적 잘 일치하며, 단일 호우와 복합 호우 사상 모두에 대해 비교적 양호한 결과를 나타내었다.

• Geomechanics and Engineering
• /
• 제29권3호
• /
• pp.321-329
• /
• 2022

Tunnel site where high water pressure is applied, such as subsea tunnel, generally selects the shield TBM (Tunnel Boring Machine) to maintain the tunnel excavation face. The shield TBM has cutters installed, and the cutters wear out during the process of excavation, so it should be checked and replaced regularly. This is called CHI (Cutterhead Intervention). The conventional CHI under high water pressure is very disadvantageous in terms of safety and economics because humans perform work in response to high water pressure and huge water inflow in the chamber. To overcome this disadvantage, this study proposes a new method to dramatically reduce water pressure and water ingress by injecting an appropriate grout solution into the front of the tunnel face through the shield TBM chamber, called New Face Grouting Method (NFGM). The tunnel model tests were performed to determine the characteristics, injection volume, and curing time of grout solution to be applied to the NFGM. Model test apparatus was composed of a pressure soil tank, a model shield TBM, a grout tank, and an air compressor to measure the amount of water inflow into the chamber. The model tests were conducted by changing the injection amount of the grout solution, the curing time after the grout injection, and the water/cement ratio of grout solution. From an economic point of view, the results showed that the injection volume of 1.0 L, curing time of 6 hours, and water/cement ratio of the grout solution between 1.5 and 2.0 are the most economical. It can be concluded that this study has presented a method to economically perform the CHI under the high water pressure.

• 한국수자원학회논문집
• /
• 제31권1호
• /
• pp.3-12
• /
• 1998

호우의 강우강도는 홍수 수문곡선의 첨두유량이나 도달시간에 영향을 미치는 주요 인자이므로 그 영향을 강우-유출 모형의 매개변수나 모형의 지배방정식에 반영하는 것이 합리적이다. 본 논문에서는강우강도의 변호를 탱크모형 최상단 탱크의 유출공 승수 변화에 반영하는 방안을 연구하였다. 탱크의 구조는 표준4단 탱크에서 최상단 유출공의 승수를 같도록 하고 1,2단 탱크의 유출에 지체시간을 부여한 수정형태이다. 내린천 유역의 여러 홍수에 대하여 최상단 탱크의 유출공 승수와 강우강도의 관계를 분석한 결과 강우강도가 증가할 때 승수 a1도 증가하는 경향이 있으나 그 정도는 다소 약하였다.이 경향을 a1=kI$(I:강우강도,k,m:계수)의 근사식으로 작성하여 모형 검증에 사용하였다. 이때 평균강우강도 I(t)는 시각 t에서 몇 시간 전까지의 이동평균을 사용하고, 계산된 a1이 그 전 값보다 크면 a1의 a1을 갱신하여 처음부터 시각 t까지의 강우량으로 다시 유출을 모의하였다. 검증 결과 강우강도를 반영한 유출공 승수 a1의 적용이 고정된 값의 사용에 비하여 홍수모의 오차를 크게 축소할 수 있었다.

• 신재생에너지
• /
• 제7권4호
• /
• pp.42-49
• /
• 2011

The objective of this paper is to suggest a new method of a wind turbine performance test. The performance test of a wind turbine is generally carried out in a wind tunnel. The test needs not only a high-accuracy measuring system but also durable structure to withstand high speed turbine rotation and wind flow. Therefore, we tried turbine performance test using a towing tank to improve stability and reliability. Because a turbine rotates more slowly and generates more torque in the water than in the wind tunnel under similarity conditions. In this study, we developed turbine performance test systems and verified the turbine test method using a towing tank through comparing results of the wind tunnel and the towing tank test.

• 설비공학논문집
• /
• 제1권1호
• /
• pp.9-20
• /
• 1989

This paper presents an analysis to predict thermal behaviors of water in ice storage tank during the coldness release process. To deal with complicated transient phenomena due to ice-water phase change and the density inversion, a theoretical model which consists of initial perfectly mixed, stratified and thermal diffusion state was introduced and a criterion on the growth of thermal boundary layer was developed. The analysis includes considerations on the type of ice-making heat exchanger, refrigerator on/off and tank arrangement. Also, discussions on the various parameters and operating conditions which have influence on the performance of the system were made. Finally, simulated results were shown, which agreed with experiments in trends reasonably.

• Water Engineering Research
• /
• 제2권1호
• /
• pp.21-31
• /
• 2001

In this study, laboratory experiments were performed to investigate the flow characteristics of a two-dimensional neutrally buoyant jet in the inlet region of a rectangular laboratory settling tank. Velocity measurements were made with a three-component ADV. Two types of baffles were installed in front of two-dimensional slot; a one-sided and a two-sided baffle. The flow fields from a plane jet impinging on these two types of baffles and a plane jet without a baffle showed quite different characteristics. To concentrate on investigating these flow characteristics, the effects of density currents due to temperature difference or the presence of sediments were not studied. Results of the experiments reveal that the use of the two-sided baffle results in the shortest inlet region. Also shown is that, in addition to the types of baffles, the Froude number turns out to be an important factor in the extent of the inlet region.

• 자원환경지질
• /
• 제37권2호
• /
• pp.185-193
• /
• 2004

휘발유와 같은 유기탄화수소계 오염 물질인 유류가 지하 분포 시, 불포화대에 분포하는 가스상(또는 증기상)유류와 지하수 포화대에 포획되어있는 잔류상 유류 오염 물질이 GPR(Ground Penetrating Radar)에 미치는 반응을 조사하기 위하여 모델 실험을 수행하였다. 모델 실험에는 모래와 자갈을 토양 매질로서 채운 탱크를 이용하였고, 유류 수송을 위한 매설 파이프 또는 지하 유류저장탱크로부터 유류의 누출을 모사하기 위하여 모델 탱크 바닥으로부터 물과 휘발유를 주입 또는 배출하여 지하수면의 상승과 하강을 유도하면서 다양한 상의 LNAPL지하분포를 모사하여 GPR 측정을 실시하였다. 본 연구 결과, 불포화대에서 매질의 수분함량 증가에 따른 레이다 파의 속도 감소를 보이는 민감한 GPR 반응이 관측되었으며, 지하수면의 상승과 하강에 따른 지하수면 위치 변화 관측에 있어서 GPR의 유용성이 입증되었다. 본 연구에서 모관대를 형성하고 있는 매질의 대수층에서는 실제 지하수면 대신 모관대의 상부가 지구물리학적 지하수면으로 탐지되었다. 또한 휘발유 주입 이후 형성된 불포화대내 가스상 LNAPL은 매질의 전기적 성질의 변화를 유도하여 레이다 파의 감쇠를 야기하는 GPR 반응을 나타내었다. 포화대 내의 잔류상 LNAPL에 대한 GPR 반응은 레이다 파의 매질내 속도 및 에너지 투과성을 향상시킴으로써 지하수면 상승으로 포화대에 포획된 잔류상 유류오염물질를 포함하는 대수층 지역의 탐지 가능성을 보여 주었다. 이는 유류오염물질이 지하수면 아래의 포화대에 잔류상의 형태로 분포하는 오염지역에서 GPR를 이용하여 유류오염지역을 탐지할 수 있는 새로운 탐사전략의 근거를 제공한다.