• 한국의류학회지
• /
• 제28권3_4호
• /
• pp.539-545
• /
• 2004

In this study, the effect of washing, bleaching, and abrasion on tactile and the water absorption properties of the split-type Nylon/Polyester (N/P) microfiber pile-knit was investigated under various enduse conditions. We examined the water absorption and surface properties of PET microfiber which will be very useful in the future. We also studied the variations of their performance during usage caused by friction and repeated washing, regard to all kinds of physical, chemical changes which will appear while using those textiles. Progress in further splitting of PET microfiber fabric is observed with increases in the number of washing and bleaching cycles, and treatment temperature. Initial water absorption (%) was increased with progress in splitting, which provided efficient capillary channel. Surface properties were varied with additional splitting by washing and abrasion. Formation of pilling and splitting by abrasion increase surface roughness, diminishing tactile property, and reduced water absorption property. The current results from this study is expected to provide the appropriate washing management guide to consumers, and to inform end-use performance of product to a producer for improving product quality.

• 한국수소및신에너지학회논문집
• /
• 제18권2호
• /
• pp.109-115
• /
• 2007

Solar energy conversion to hydrogen was carried out via a two-step thermochemical water splitting using metal oxide redox pair. To simulate the solar radiation, a 7 kW short arc Xe-lamp was used. Partially reduced iron oxide and cerium oxide have the water splitting ability, respectively. So, $Fe_3O_4$ supported on $CeO_2$ was selected as the active material. $Fe_3O_4/CeO_2$(20 wt/80 wt%) was prepared by impregnation method, then the active material was washcoated on the ceramic honeycomb monolith made of mullite and cordierite. Oxygen was released at the reduction step($1673{\sim}1823\;K$) and hydrogen was produced from water at lower temperature($873{\sim}1273\;K$). The result demonstrate the possibility of the 2-step thermochemical water splitting hydrogen production by the active material washcoated monolith. And hydrogen and oxygen was produced separately without any separation process in a monolith installed reactor. But the SEM and EDX analysis results revealed that the support used in this experiment is not suitable due to the thermal instability and coating material migration.

• 한국수소및신에너지학회논문집
• /
• 제14권3호
• /
• pp.268-275
• /
• 2003

The water-splitting process by the metal oxides using solar heat is one of the hydrogen production method. The hydrogen production process using the metal oxides (NiFe2O4/NiAl2O4,CoFe2O4/CoAl2O4, CoMnNiFerrite, CoMnSnFerrite, CoMnZnFerrite, CoSnZnFerrite) was carried out by two steps. The first step was carried out by the CH4-reduction to increase activation of metal oxides at operation temperature. And then, it was carried out the water-splitting reaction using the water at operation temperature for the second step. Hydrogen was produced in this step. The production rates of H2 were 110, 160, 72, 29, 17, $21m{\ell}/hr{\cdot}g-_{Metal\;Oxide}$ for NiFe2O4/NiAl2O4, CoFe2O4/CoAl2O4, CoMnNiFerrite, CoMnSnFerrite, CoMnZnFerrite, CoSnZnFerrite respectively in the second step. CoFe2O4/CoAl2O4 had higher H2 production rate than the other metal oxides.

• 멤브레인
• /
• 제13권3호
• /
• pp.143-153
• /
• 2003

본 연구에서는 양이온교환막 표면에 형성된 바이폴라 계면이 물분해 현상에 미치는 영향을 조사하였다. 실험결과, 전기투석 중 막표면에 형성된 고정화된 바이폴라 계면이 심각한 물분해를 유발함을 알 수 있었다. 특히, 고정화된 바이폴라 계면은 다가 양이온이 전해질로 이용되는 전기투석 시스템에서 양이온교환막 표면에 쉽게 형성됨을 알 수 있었다. 낮은 용해도적 상수를 갖는 다가 양이온들은 급격한 물분해를 유발하였는데 이는 이들이 막표면에서 쉽게 수산화물의 형태로 침적되며 따라서 수소-친화 그룹과 수산화-친화 그룹으로 구성된 바이폴라 계면이 막-용액 계면에 형성됨을 알 수 있었다. 따라서 물분해는 막 표면의 금속수산화물 층과 막의 고정전하 그룹간에 발생되는 강한 전기장에 의해 크게 활성화됨을 알수 있다. 또한 이와 유사하게 분자량이 큰 유기 상대이온들이 막표면에 누적되는 경우에도 고정화된 바이폴라 계면이 형성되어 한계전류밀도 이상에서 심각한 물분해를 유발하였다. 따라서 전기투석의 고전류 운전시 효율 향상을 위해서는 막표면에 유발되는 고정화된 바이폴라 계면의 형성을 억제하는 것이 매우 중요함을 알 수 있다.

• 청정기술
• /
• 제19권3호
• /
• pp.191-200
• /
• 2013

미래의 무한 청정 에너지원으로 고려되고 있는 태양에너지를 활용하여 수소를 생산할 수 있는 광촉매재료에 대한 연구가 활발히 진행되고 있다. 본 총설에서는 태양광을 이용한 물분해 수소생산용 광촉매재료들에 대하여 알아보고, 현재까지 보고된 다양한 광촉매재료의 특성들을 검토하고자 한다. 또한, 다양한 광촉매재료를 활용하여 수소생산 효율을 높이기 위해서 시행되었던 촉매재료 개질 방법들을 통하여 향후 지속적으로 진행될 연구방향을 모색해 보고자 한다. 각각의 광촉매재료들이 활성을 가질 수 있는 빛의 영역을 알아보고, 광촉매 작용에 필수적인 광원, 광밀도, 파장영역 등의 중요성에 대해서도 토론한다.

• 한국세라믹학회지
• /
• 제48권2호
• /
• pp.200-204
• /
• 2011

Increase of surface area and decrease of band gap in $TiO_2$ semiconductors are significant to improve the efficiency of water splitting by photoelectrolysis. In this study $TiO_2$ nanotube arrays with ~7 um length and ~100 nm diameter were fabricated by an anodizing technique of titanium foils using DMSO (dimethyl sulfoxide)-based electrolytes. Then to control the band gap of the $TiO_2$ arrays, they were annealed at $550^{\circ}C$ for up to 180 min in $NH_3$ gas ambient. The samples annealed in $NH_3$ gas for 30 min and 60 min showed superior photo-conversion efficiency for water splitting under white and visible light. A $TiO_2$ nanotube annealed in $NH_3$ gas ambient for a period longer than 120 min showed 1 order higher leakage current. It is believed that the decrease of band gap and increase of conductivity in $TiO_2$ nanotube arrays due to $NH_3$ gas treatments result in the superior water-splitting performance.

• Bulletin of the Korean Chemical Society
• /
• 제33권7호
• /
• pp.2133-2139
• /
• 2012

A new system using $TiO_2$ (nano-sized, band-gap 3.14 eV)-impregnated spherical ZnS (micro-sized, band-gap 2.73 eV) nano/micro-composites (Ti 0.001, 0.005, 0.01, and 0.05 mol %/ZnS) was developed to enhance the production of hydrogen from methanol/water splitting. The ZnS particles in a spherical morphology with a diameter of about 2-4 mm which can absorb around 455 nm were prepared by hydrothermal method. This material was used as a photocatalyst with loading by nano-sized $TiO_2$ (20-30 nm) for hydrogen production. The evolution of $H_2$ from methanol/water (1:1) photo splitting over the $TiO_2$/ZnS composite in the liquid system was enhanced, compared with that over pure $TiO_2$ and ZnS. In particular, 1.2 mmol of $H_2$ gas was produced after 12 h when 0.005 mol % $TiO_2$/ZnS nano/micro-composite was used. On the basis of cyclic voltammeter (CV) and UV-visible spectrums results, the high photoactivity was attributed to the larger band gap and the lower LUMO in the $TiO_2$/ZnS composite, due to the decreased recombination between the excited electrons and holes.

• Journal of Electrochemical Science and Technology
• /
• 제13권3호
• /
• pp.377-389
• /
• 2022

The current global energy supply depends heavily on fossil fuels. This makes technology such as direct water splitting from harvesting solar energy in photoelectrochemical (PEC) systems potentially attractive due to its a promising route for environmentally benign hydrogen production. In this study, undoped and nickel-doped molybdenum oxide photoanodes (called photoanodes S₁ and S₂ respectively) were synthesized through electrodeposition by applying -1.377 V vs Ag/AgCl (3 M KCl) for 3 hours on an FTO-coated glass substrate immersed in molibdatecitrate aqueous solutions at pH 9. Scanning electron microscopy (SEM), atomic force microscopy (AFM), energy-dispersive X-ray spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS) were used for microstructural and compositional characterizations of the photoanodes. In addition, the optical and photoelectrochemical characterizations of these photoanodes were performed by UV-Visible spectroscopy, and linear scanning voltammetry (LSV) respectively. The results showed that all the photoanodes produced exhibit conductivity and catalytic properties that make them attractive for water splitting application in a photoelectrochemical cell. In this context, the photoanode S₂ exhibited better photocatalytic activity than the photoanode S₁. In addition, photoanode S₂ had the lowest optical band-gap energy value (2.58 eV), which would allow better utilization of the solar spectrum.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.588-588
• /
• 2012

Zn-doped $TiO_2$ mesoporous microspheres with high photocatalytic activity were synthesized via combined sol-gel and solvothermal methods for photocatalytic water splitting. It is found that the photocatalytic water splitting and photocatalytic degradation activity can be enhanced by doping an appropriate amount of Zn. Our results reveal that Zn doping inhibits the recombination of photo-generated charge carriers of $TiO_2$ and improves the probability of photo-generated charge carrier separation and hence the photocatalytic activity of $TiO_2$.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1122-1123
• /
• 2006

Mn-Fe oxide and Mn-Fe oxide/$ZrO_2$(50wt%/50wt%) were prepared by ball milling method. XRD data of the prepared samples revealed that hematite and ferrite phase coexisted. Water splitting at 1273K, after thermal reduction at 1573K, was performed 4 times for the samples. Hydrogen production amount was analyzed by GC with TCD detector. Water splitting capacity of Mn-Fe oxide was improved by ball milling with $ZrO_2$.