• Food Science and Biotechnology
• /
• v.16 no.4
• /
• pp.543-548
• /
• 2007

Low-energy processing technology, which enhances the utility of defatted soybean flour (DSF), was developed using extrusion processing. DSF was extruded at different conditions using a twin screw extruder and then, dried at $40^{\circ}C$ for 20 hr. The nitrogen solubility index (NSI), viscosity, water solubility index (WSI), and water absorption index (WAI) of DSF increased after extrusion processing. The density of DSF extrudates decreased with the decrease in water content from 53 to 33% and the increase in extrusion temperature from 110 to $160^{\circ}C$. The addition of NaOH from 1.2 to 1.8% and citric acid from 1 to 5% increased the total solubility (TS) of DSF due to the decrease of protein coiling and hydrophobic bonds formation during extrusion processing. When viscozyme was reacted first, TS, NSI, and soluble carbohydrate content of DSF hydrolysates increased about 12, 6, and 7%, respectively, compared to them reacted with protease first. The TS and NSI of DSF hydrolysates were increased about 15 and 10%, respectively, by extrusion processing at alkaline and acidic pH. Extrusion processing at alkaline and acidic pH contributed the increase of efficiency to hydrolyze DSF samples using enzyme.

• Agricultural and Biosystems Engineering
• /
• v.6 no.2
• /
• pp.70-76
• /
• 2005

Seed, stem and sprout of F. tataricum were separately milled using the ultra fine mill under the same condition to investigate the effect of roasting or extruding on the particle size, microstructure and water solubility of dietary fiber. The mean particle size of MR (roasting) is increased in stem and sprout, and that of ME (extruding) is increased in seed, compared to that of control. The microscopic views of seed show that control has the spherical shape but ME the larger and irregular shape, and those of stem and sprout show that control has the needle like shape but ME more rounded shape. Water solubility index of ME is much higher than that of control or MR in seed, stem and sprout. It shows that seed, stem and sprout are damaged more in extruding than in roasting, and the starch and cell wall structure must be destroyed to change the water insoluble dietary fiber into the water soluble dietary fiber.

• Food Science and Biotechnology
• /
• v.16 no.5
• /
• pp.783-788
• /
• 2007

An advantage to the extrusion of raw potatoes is a reduction in the energy input required to process potato products; however, the effects of extrusion on the properties of raw potato have not been studied. The purposes of this study were to develop a workable extrusion process for raw potato and to study the effects of extrusion conditions on the pasting properties of extruded potato products. The peak viscosity, final viscosity, pasting temperature, water solubility index, and water absorption index of pressed and pressed-dried potato extrudates decreased as die exit temperature increased, whereas they did not change as screw speed increased. The peak viscosity, final viscosity, and water solubility of steam-cooked potato products decreased with extrusion processing; however, they did not change with increasing die exit temperature and screw speed. Potato products with different degrees of depolymerization of extruded potato starch, depending on die exit temperature, were produced from raw potatoes.

• Food Engineering Progress
• /
• v.15 no.2
• /
• pp.148-154
• /
• 2011

The objective of this study was to determine the effect of die geometry on expansion index of extruded corn flour. Water solubility index, water absorption index and specific mechanical energy (SME) input were analyzed to observe the relationship with die geometry. The feed moisture content was 20 and 25%. Die dimensions were tapered angle (57, 95o) and length/diameter (L/D) ratio of die land (0.67, 1.67 and 2.67). The SME input was the highest at 20% moisture content and 2.23E-10 m3 die constant. The sectional and volumetric expansion indices at 20% moisture were increased with increase in die constant. However, die constant did not influence sectional expansion index of corn flour extrudate at 25% moisture content. The extruded corn flour at 25% moisture content had higher longitudinal expansion index than those of extruded corn flour at 20% moisture content. Sectional expansion and longitudinal expansion index were negatively correlated. The water absorption index and water solubility index were not affected with the die constant.

• Korean Journal of Food Science and Technology
• /
• v.26 no.4
• /
• pp.428-435
• /
• 1994

Properties of modified rice starches prepared in drum drying and extrusion were evaluated to use for effective utilization. Blue value was the lowest (p<0.05) for waxy rice starch and L value was decreased after modification of starches. Water solubility index was the highest for modified starches prepared in extrusion, while water absorption index was the highest for modified starches prepared in drum drying. Cold-Water-Solubility was the highest (p<0.05) for modified rice starch prepared in drum drying (RD). Consistency index of RD was drastically increased as shear rate increased and yield stress was the highest for RD. Results of Gel Permeation Chromatography showed that starch components were broken down into lower molecular weight materials and amylose are degraded by modification. Changes in the X-ray diffrectometry pattern indicated the transformation of granule into an amorphous state during modification and illustrated V-type.

• The Korean Journal of Food And Nutrition
• /
• v.7 no.2
• /
• pp.137-143
• /
• 1994

To optimize extrusion cooking condition of single screw extuder for production of puffed rice extrudate using response surface methodology (RSM), moisture content, barrel temperature and screw speed were determined from contour maps, showing relationship between dependent (hardness, expansion ratio, water absorption index, water solubility Index, degree of gelatinization) and independent variables. Optimum operational conditions for production of puffed rice extrudate with suitable quality properties were moisture content 17%, barrel temperature 1$25^{\circ}C$ and screw speed 210 rpm, respectively.

• Korean Journal of Food Science and Technology
• /
• v.31 no.6
• /
• pp.1542-1548
• /
• 1999

Seven rice varieties(Suweonjo, Suweon232, BG276-5, IR44, IR41999-139, Suweon230 and Yongjubyeo) were used to study the effect of particle size on the physicochemical properties(proximate analysis, color values, amylogram, water absorption index and water solubility index) of rice flours. Suweonjo had the highest amylose content (27.07%) and Yongjubyeo had the lowest one (17.17%). Suweonjo had the highest protein content (11.36%) and IR44 had the lowest one (6.75%). Protein content of rice flours prepared in a pin mill was decreased as particle size of rice flours decreased. L value of rice flour was increased as particle size of rice flours decreased while b value and ${\Delta}E$ value decreased. Maximum viscosity, cold paste viscosity, breakdown, total setback in amylogram properties were increased as particle size of rice flours decreased while initial paste temperature decreased. Water absorption index (WAI) and water solubility index (WSI) were increased as particle size of rice flour decreased.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.4
• /
• pp.635-643
• /
• 2017

The properties of rice were studied, and 8 rice flour cultivars were used to study the effect of particle size on the physicochemical properties, color value, RVA viscosities, water absorption index (WAI), and water solubility index (WSI) of rice flours. The mean particle size by the 3 particle size classification of 150 mesh, 200 mesh, and 250 mesh was, $90.75{\mu}m$, $60.73{\mu}m$, $39.94{\mu}m$, respectively. Thai rice had the highest amylose content and Samkwang rice had the lowest amylose content. Protein content of rice flours prepared was decreased as the particle size of rice flour decreased. In terms of color values, the L-value and the a-value of rice flour were increased as the particle size of rice flours decreased, while the b-value was decreased as the particle size of rice flours decreased. Using a rapid visco analyzer (RVA), the initial pasting temperature of Thai rice cultivar was found to be the highest; the peak viscosities of Sunpum cultivar and Misomi cultivar, and Samkwang rice were higher than those of other rice flours. The water absorption index and water solubility index were increased as the particle size of rice flour decreased. In order to use processed rice flour for the development of processed foods, proper characteristics of the cultivars and particle size should be considered.

• The Korean Journal of Food And Nutrition
• /
• v.33 no.3
• /
• pp.287-298
• /
• 2020

When producing rice products, it is very important to select suitable raw materials. Therefore, in this study, the quality characteristics of 16 rice cultivars were quantified to determine the criteria for evaluating the machinability of raw rice. The L value, which can affect the color of porridge prepared from rice, was the greatest for Hwaseonchalbyeo (84.17). The water-binding capacity, related to water interaction, was high in Hyangcheola (113.2%), and water solubility was high in Shingil (22.3%). Dodamssal (42.3%, 70.7 RVU) and Hwaseonchalbyeo (4.7%, 27.8 RVU) showed lower final viscosity compared to the cultivars in which the amylose content was medium groups (16.4~21.2%, 173.6~277.2 RVU). Specifically, cultivars with high or low amylose content had a low viscosity. The characteristics of the distribution of raw rice quality data were confirmed through 11 histograms. Furthermore, amylose content vs. water solubility, water solubility vs. peak viscosity, and peak viscosity vs. final viscosity showed high correlations (r=0.542, -0.569, and 0.836 respectively, p<0.01), and clear cultivar discrimination by the standard error of the mean (0.765~10.811). In conclusion, amylose content, water solubility, and peak viscosity were considered the most suitable characteristics for the quality evaluation of raw rice.

• Journal of the Korean Society of Food Culture
• /
• v.36 no.5
• /
• pp.484-491
• /
• 2021

This study investigated the effect of dry heat treatment (DHT) on the physicochemical properties of hard type (HR) and floury type (FR) rice to improve the processing aptitude of rice flour. The rice flour was heated at 130℃ for 0, 2 and 4 hours, and the color value, water absorption index (WAI), water soluble index (WSI), swelling power, solubility, pasting properties, particle shape and the X-ray diffraction were measured. After DHT, the L value of rice flour decreased, and the b value increased. The WAI, WSI, swelling power and solubility of HR and FR increased with the increase of treatment time. The cold viscosity and setback increased, while breakdown decreased. Cracks and lumps formed with fine particles were observed. The X-ray diffraction pattern was A-type, while the diffraction intensity decreased. According to the results of the two-way analysis of variance (ANOVA) test, the hydration and pasting properties were significantly different between HR and FR and were affected by DHT time. The results suggest that the properties of modified rice flour by DHT can be used in the food industry.