• Animal cells and systems
• /
• 제16권3호
• /
• pp.198-206
• /
• 2012

Anxiety in zebrafish can be determined by examining their bottom-dwelling and light-avoidance behavior. This study determines the effects of physostigmine and scopolamine on anxiety in zebrafish by measuring swimming frequency for three horizontal layers and three vertical columns of a water test tank illuminated by a light source located above the central surface of the tank. In the 1 h session, zebrafish in the control group preferred the bottom layer the most and the center column the least. Zebrafish treated with 2-20 ${\mu}M$ physostigmine were more likely to prefer the to layer than controls, and there were significant pairwise differences between physostigmine-treated zebrafish and controls, indicating the anxiolytic effect of physostigmine. Further, 10 and $20{\mu}M$ physostigmine-treated zebrafish no longer avoided the center column. Scopolamine had no anxiolytic effect on bottom-dwelling and light-avoidance behaviors but suppressed the anxiolytic effect of physostigmine. In terms of their preference for various zones formed by layers and columns, zebrafish in the control group preferred the bottom left and right zones the most. Physostigmine had a positive effect on the preference for the top center zone, which was suppressed by scopolamine pretreatment. The results suggest that the level of anxiety in zebrafish can be reduced by activating acetylcholinergic neurotransmitter systems, which is mediated in part by muscarinic receptors.

• 지구물리
• /
• 제4권1호
• /
• pp.11-20
• /
• 2001

석조문화재에 대한 지구물리학적 진단방법을 제시하기 위해, 경남 함안군 군북면에 있는 방어산 마애불에 대한 굴절법 탄성파탐사와 전기비저항탐사를 수행하였다. 굴절법 탄성파탐사결과 본 마애불 지역의 상부층은 탄성파속도 308～366m/s의 풍화토층, 1906～2090m/s의 연암층과 그 하부의 5061～5650m/s의 극경암층에 해당하는 기반암이 분포하고 있으며, 마애불 주변부의 풍화토층 및 연암층에 대한 지반보강대책이 설계되어야 할 것으로 판단된다. 전기비저항 탐사결과 마애불 우측부에 남북～북북동 방향의 131～226 Ohm-m의 낮은 비저항대가 발견되며, 이 부분은 강우시에 지하수의 유동통로 역할을 하여 대상 부지 중에서 가장 취약한 연약구간이다.

• Computers and Concrete
• /
• 제21권6호
• /
• pp.623-635
• /
• 2018

In order to research the influence of different recycled aggregate contents on the mechanical properties of pervious concrete, the experimental study and numerical simulation analysis of the mechanical properties of pervious concrete with five kinds of recycled aggregates contents (0%, 25%, 50%, 75% and 100%) are carried out in this paper. The experimental test were first performed on concrete specimens of different sizes in order to determine the influence of recycled aggregate on the compressive strength and splitting tensile strength, direct tension strength and bending strength. Then, the development of the internal cracks of pervious concrete under different working conditions is studied more intuitively by $PFC^{3D}$. The experimental results show that the concrete compressive strength, tensile strength and bending strength decrease with the increase of the recycled aggregate contents. This trend of reduction is not only related to the brittleness of recycled aggregate concrete, but also to the weak viscosity of recycled aggregate and cement paste. It is found that the fracture surface of pervious concrete with recycled aggregate is smoother than that of natural aggregate pervious concrete by $PFC^{3D}$, which means that the bridging effect is weakened in the stress transfer between the left and right sides of the crack. Through the analysis of the development of the internal cracks, the recycled aggregate concrete generated more cracks than the natural aggregate concrete, which means that the recycled aggregate concrete is easier to form a coalescence fracture surface and eventually break.

• 한국지반공학회논문집
• /
• 제37권10호
• /
• pp.55-63
• /
• 2021

쉴드TBM의 제작기술 발전과 시공경험 축적으로, 쉴드터널은 전력, 통신 및 상하수도와 같은 소구경 터널에서 도로 및 철도와 같은 대구경 터널로 확대되고 있으며, 그에 따라 병설쉴드터널의 적용도 증가하고 있다. Peck(1969)에 의해 연약지반에서 단선쉴드터널의 지표침하형상이 Gaussian distribution으로 표현될 수 있음이 제시된 이후, 현장계측, 실내모형실험 및 수치해석 등의 방법을 통해 많은 연구에서 이의 적정성이 확인되었다. 본 연구는 현장 계측된 병설쉴드터널의 지표침하로부터 후행 터널(2^nd tunnel)에 의한 추가 지표침하 형상을 표현하기 위해 침하형상의 좌·우측에 Gaussian curve를 각각 적용함으로써, 침하형상을 보다 정확히 표현할 수 있음을 알 수 있었다.

• Journal of Veterinary Science
• /
• 제22권1호
• /
• pp.9.1-9.11
• /
• 2021

Background: Scalding burn injuries can occur in everyday life but occur more frequently in young children. Therefore, it is important to develop more effective burn treatments. Objectives: This study examined the effects of bee venom (BV) stimulation on scalding burn injury-induced nociception in mice as a new treatment for burn pain. Methods: To develop a burn injury model, the right hind paw was immersed temporarily in hot water (65℃, 3 seconds). Immediately after the burn, BV (0.01, 0.02, or 0.1 mg/kg) was injected subcutaneously into the ipsilateral knee area once daily for 14 days. A von Frey test was performed to assess the nociceptive response, and the altered walking parameters were evaluated using an automated gait analysis system. In addition, the peripheral and central expression changes in substance P (Sub P) were measured in the dorsal root ganglion and spinal cord by immunofluorescence. Results: Repeated BV treatment at the 2 higher doses used in this study (0.02 and 0.1 mg/kg) alleviated the pain responses remarkably and recovered the gait performances to the level of acetaminophen (200 mg/kg, intraperitoneal, once daily), which used as the positive control group. Moreover, BV stimulation had an inhibitory effect on the increased expression of Sub P in the peripheral and central nervous systems by a burn injury. Conclusions: These results suggest that a peripheral BV treatment may have positive potency in treating burn-induced pain.

• 한국기계가공학회지
• /
• 제17권6호
• /
• pp.177-185
• /
• 2018

There is a need to study dust separator screens with good drainage efficiency while effectively filtering suspended solids and other contaminants entering the intake pumping station, the drainage pumping station and the mediation pumping station, the cooling water inlet of the power plant, and the like. In this paper, Numerical studies were conducted for the optimal design of the dust separator screen using the Coanda effect. The shape of the dust separator screen is important, such as the right curvature radius $R_1$ at the top of the dust separator screen and the left curvature radius $R_2$ at the top, h is the height difference and shape between the screen and the accelerating plate, and ${\theta}$ is the inclination angle of the screen. A total of 4 shape factors were set and the effects of Coanda and drainage performance of each element were compared and analyzed, the optimum length and size of each shape element were derived by classifying the shape elements into direct and indirect influences. Finally, it was possible to effectively filter foreign matter by narrowing the screen spacing, and the drainage performance was analyzed and optimized through numerical studies of dust separator screen.

• Animal Bioscience
• /
• 제34권5호
• /
• pp.914-921
• /
• 2021

Objective: The objective of this study was to compare growth performance, carcass traits and meat quality in young bulls, steers and heifers produced by crossing Limousin bulls with Holstein-Friesian cows, fattened semi-intensively and slaughtered at 18 months of age. Methods: Thirty-one young calves were reared in a conventional production system, and were fed milk replacer, hay and concentrate. At 6 months of age, the animals were divided into groups based on gender, and were fed a total mixed ration composed of grass silage, concentrates I and II in a semi-intensive production system. At the end of the fattening period (18 months), the animals were slaughtered, carcass quality was evaluated, and samples of musculus longissimus thoracis were collected to determine the proximate composition and quality of meat. Results: Bulls were characterized by the highest percentage share of the most valuable cuts in the carcass, and three-rib sections from bull carcasses had the highest lean meat content with low intramuscular fat content (0.93%). No significant differences in carcass conformation, dressing percentage or the percentage share of round in the right half-carcass were found between bulls vs. steers and heifers. Heifers and steers had higher carcass fat content than bulls, which had a positive influence on the sensory properties of beef. In comparison with the meat of bulls, the meat of steers and heifers was characterized by more desirable physical properties and sensory attributes (water-holding capacity, shear force, color lightness, aroma, juiciness, tenderness, flavor). Conclusion: Under the semi-intensive production system, heifers and steers had higher carcass fat content than bulls, which had a positive effect on the sensory properties of beef. Bulls are better suited for intensive systems, which contribute to improving the quality of their meat. The results of this study may encourage producers to breed steers and heifers for beef.

• 광물과 암석
• /
• 제33권4호
• /
• pp.377-389
• /
• 2020

본 연구에서는 낙동강수계의 안동댐 퇴적물에 대한 오염도 조사 및 평가를 수행하였다. 안동댐 상류 40 km까지 약 5 km 간격으로 호수의 중간, 좌, 우지점에서 성층기와 전도기로 구분하여 퇴적물 시료를 채취하였다. 일반 항목인 강열 감량, 총질소, 총인의 경우 오염도가 낮지만, 중금속의 경우 비소와 카드뮴의 오염도는 매우 높다. 지천 및 대조군에 비해 댐 내 퇴적물의 오염도가 높으며, 시료채취 시기별로는 성층기에 크롬, 구리, 납의 농도가 높고, 순환기에 아연의 농도가 높은 경향을 보인다. 상하류의 위치에 따른 농도 차이를 나타내는 중금속은 비소, 카드뮴, 망간, 아연이며 차이를 보이지 않는 항목은 크롬, 구리, 수은, 철, 납 등이다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제44권4호
• /
• pp.367-373
• /
• 2021

A quality assurance of computed tomography(CT) have done seven items that were water attenuation coefficient, noise, homogeneity, spatial resolution, contrast resolution, slice thickness, artifact using by standard phantom. But there is no quality assurance items and methods for CT simulator at domestic institutions yet. Therefore the study aimed to access the CT dose index(CTDI), table tilting, image distortion, laser accuracy, table movement accuracy and CT seven items for CT simulator quality assurance. The CTDI at the center of the head phantom was 0.81 for 80 kVp, 1.55 for 100 kVp, 2.50 for 120 mm, 0.22 for 80 kVp at the center of the body phantom, 0.469 for 100 kVp, and 0.81 for 120 kVp. The table tilting was within the tolerance range of ±1.0° or less. Image distortion had 1 mm distortion in the left and right images based on the center, and the laser accuracy was measured within ±2 mm tolerance. The purpose of this study is to improve the quality assurance items suitable for the current situation in Korea in order to protect the normal tissues during the radiation treatment process and manage the CT simulator that is implemented to find the location of the tumor more clearly. In order to improve the accuracy of the CT simulator when looking at the results, the error range of each item should be small. It is hoped that the quality assurance items of the CT simulator will be improved by suggesting the quality assurance direction of the CT simulator in this study, and the results of radiation therapy will also improve.

• Journal of Periodontal and Implant Science
• /
• 제52권5호
• /
• pp.411-421
• /
• 2022

Purpose: In this study, we aimed to evaluate the degree of heat generation when a novel drill design with an irrigation slot was used with metal sleeve-free (MF) and metal sleeve-incorporated (MI) surgical guides in an environment similar to that of the actual oral cavity. Methods: A typodont with a missing mandibular right first molar and 21 bovine rib blocks were used. Three-dimensional-printed MF and MI surgical guides, designed for the placement of internal tapered implant fixtures, were used with slot and non-slot drills. The following groups were compared: group 1, MI surgical guide with slot drill; group 2, MI surgical guide with a non-slot drill; and group 3, MF surgical guide with a slot drill. A constant-temperature water bath at 36℃ was used. The drilling was performed in 6 stages, and the initial, highest, and lowest temperatures of the cortical bone were measured at each stage using a non-contact infrared thermometer. Results: There were no temperature increases above the initial temperature in any drilling procedure. The only significant difference between the non-slot and slot groups was observed with the use of the first drill in the MI group, with a higher temperature in the non-slot group (P=0.012). When the heat generation during the first and the second drilling was compared in the non-slot group, the heat generation during the first drilling was significantly higher (P<0.001), and there was no significant difference in heat generation between the drills in the slot group. Conclusions: Within the limitations of this study, implant-site preparation with the surgical guide showed no critical increase in the temperature of the cortical bone, regardless of whether there was a slot in the drill. In particular, the slotted drill had a cooling effect during the initial drilling.