• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.112-113
• /
• 2014

This study was done to resolve the air reduction in mortar when mixed with ERCO. Effects of the water repellent ALC powder due to its particle size and substitution ratio on the cement mortar with ERCO was analyzed. Results showed more water repellent ALC powder ensured more air but did not affect the size of particles. It was determined the compression was caused by more air and water added to achieve the flow. Therefore, substituting with water repellent ALC powder may compensate for the air reduction in mortar with ERCO. Other measures and approaches are needed in order to resolve the reduced strength.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 봄 학술발표회 논문집
• /
• pp.434-435
• /
• 2003

Physicochemical properties of a polymer surface significantly affect adhesion, wetting, and dyeing properties. In recent years, low temperature plasma technology has been widely used for surface modification of polymers. Surface fluorination by low temperature plasma treatment has been employed to improve the water and oily repellency of textile fabrics. However, very few results have been reported on soil release properties of the oxygen plasma treated textile fabrics. (omitted)

• 한국염색가공학회지
• /
• 제5권1호
• /
• pp.10-18
• /
• 1993

Epoxy compound was synthesized from bisphellol-A with epichlorophydrine. Epoxy compound and siloxane were emulsified conjugative one or another. The water repellency of silk fabrics was also highly improved by the treatment of epoxy-siloxane mixed emulsions containing stannic chloride and zirconium oxychloride. The maximum wrinkle recovery was obtained from the fabrics treated under the condition 2.5%-epoxy-siloxane emulsion at 16$0^{\circ}C$. The breaking elongation, the reflectance, the tensile strength and the bending properties of silk fabrics were not degraded severely by the treatment of epoxy-siloxane emulsion.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.63-64
• /
• 2023

In order to reduce the high absorption ratio of spent coffee grounds, this study examined the compressive strength and absorption ratio of mortar replacing coated spent coffee grounds according to the type of water repellent. In order to examine this, as the water repellent used, a silane-based water repellent (fluorine-based water repellent) and an acrylic-based water repellent, which are film-type water repellents, and a silane/siloxane-based water repellent, which are penetration-type water repellents, were used. The spent coffee grounds were coated with each of three water repellents, and mortar was prepared by mixing cement and fine aggregate. As a result of the experiment, the compressive strength and absorption ratio of the mortar replaced with coated spent coffee grounds coated with the film-type water repellent were superior to the penetration-type water repellent. Therefore, in order to reduce the high absorption ratio of spent coffee grounds, a suitable water repellent is a film-type water repellent. Among them, it is judged that the acrylic type has excellent water repellency and is suitable.

• 대한가정학회지
• /
• 제20권3호
• /
• pp.19-24
• /
• 1982

This study was carried out to investigate the relationship between the water resistance and the air permeability. The results are as follows; 1. In case of the water proofing fabrics, We cannot find that there is any relationship between the water resistance and the air permeability according to the kinds of finishing, while in case of the water repellent finished fabries, we can find that there is a correlationship between them, especially the hydrostatic pressure and the air permeability are found to have negative correlation. 2. In case of the water proofing fabrics, the relationship between the water resistance and the air permeability is not affected by the thickness of the fabrics. On the other hand, in case of the water repellent finished fabrics, the relationship between them is affected by the thickness of the fabrics. Especially, the relationship between the hydrostatic pressure and the air permeability as well as the relationship between the water repellency and the air permeability is effect much by the thickness of the fabrics, too. 3. In case of the water proofing fabrics, the relationship between the water resistance and the air permeability is not affected by fabric count. On the otherhand, in case of the water repellent finished fabrics, the relationship between them is affected by the fabric count. Especially, the relationship between hydrostatic pressure and the air permeability, and the relationship between the water proof and the air permeability are affected much by fabric count.

• 한국잠사곤충학회지
• /
• 제27권2호
• /
• pp.28-39
• /
• 1985

견직물의 실용성능(방추도, 세탁성)을 개선할 목적으로 실크하브다이(silk habutae)에 실리콘수지를 유화 가공법으로 처리하였다. 실리콘가공 하브다이의 방추도, 발수도, 유연도, 강신도, 수분율 등은 직물검사 방법에 따라서 검사하였고 가공 후 견피브로인의 구조적인 변화를 구명하기 위하여 주사전자현미경, 아미노산분석, X-선 회절강도, FT-IR 흡수분석에 의하여 검토한 결과 아래와 같은 결과를 얻었다. 1) 견하브다이 직물의 방추도는 soaping 처리오 큐어링 조건에 의하여 현저히 개선되었다. 2) 실리콘 수지 가공에 의하여 견하브다이의 발수도와 유연도가 향상되었고, 가공 후 silk fibroin을 주사전자현미경으로 관찰한 결과 견섬유 특유의 불규칙한 섬유표면은 평활하게 관찰되었다. 3) 실리콘 수지와 silk fibroin의 반응에 따라서 피브로인 조성 아미노산 중 극성기를 가지고 있는 아미노산의 감소비율이 현저하였다. 4) 실리콘 수지가공 silk habutae는 soaping에 의하여 X-선 회절강도가 높아지는 경향이었다. 5) 가공 후 견하브다이의 FT-IR 흡수곡선에 실록산등의 peak가 검출된 것으로 미루어 fibroin의 개질이 가능하다고 생각된다.

• 한국재료학회지
• /
• 제23권1호
• /
• pp.53-58
• /
• 2013

Superhydrophobic $SiO_2$ layers with a micro-nano hierarchical surface structure were prepared. $SiO_2$ layers deposited via an electrospray method combined with a sol-gel chemical route were rough on the microscale. Au particles were decorated on the surface of the microscale-rough $SiO_2$ layers by use of the photo-reduction process with different intensities ($0.11-1.9mW/cm^2$) and illumination times (60-240 sec) of ultraviolet light. With the aid of nanoscale Au nanoparticles, this consequently resulted in a micro-nano hierarchical surface structure. Subsequent fluorination treatment with a solution containing trichloro(1H,2H,2H,2H-perfluorooctyl)silane fluorinated the hierarchical $SiO_2$ layers. The change in surface roughness factor was in good agreement with that observed for the water contact angle, where the surface roughness factor developed as a measure needed to evaluate the degree of surface roughness. The resulting $SiO_2$ layers revealed excellent repellency toward various liquid droplets with different surface tensions ranging from 46 to 72.3 mN/m. Especially, the micro-nano hierarchical surface created at an illumination intensity of $0.11mW/cm^2$ and illumination time of 60 sec showed the largest water contact angle of $170^{\circ}$. Based on the Cassie-Baxter and Young-Dupre equations, the surface fraction and work of adhesion for the micronano hierarchical $SiO_2$ layers were evaluated. The work of adhesion was estimated to be less than $3{\times}10^{-3}N/m$ for all the liquid droplets. This exceptionally small work of adhesion is likely to be responsible for the strong repellency of the liquids to the micro-nano hierarchical $SiO_2$ layers.

• 폴리머
• /
• 제27권6호
• /
• pp.528-535
• /
• 2003

불소계 섬유용 발수$.$발유제의 제조에 일반적으로 쓰이는 과불소알킬아크릴레이트 및 노말알킬아크릴레이트의 공중합체를 유화 중합법으로 제조할 시 계면활성제, 유기용매, 내구성 향상 목적으로 소량 첨가되는 기능성 단량체 및 공중합체의 결정 용융 온도 (T$_{m}$ )변화에 따른 고분자 라텍스의 입자 직경 변화와 그들의 표면 특성 (접촉각 및 발수도)의 변화를 관찰하였다 또한 WAXD 실험을 통해 공중합체의 T$_{m}$ 의 변화에 따른 공중합체의 곁사슬의 채움구조 변화를 조사하였으며 이를 통해 표면 특성과의 관계를 연구하였다. 그리고 과불소알킬아크릴레이트와 더불어 말단기가 약간 다른 불소아크릴레이트, [CH$_2$= CH$CO_2$CH$_2$(CF$_2$CF$_2$)nH] (n=4,5,6)를 사용한 불소아크릴레이트 공중합체도 동시에 합성하여 공중합체의 곁사슬의 채움구조, 말단기($CH_3$-,CF$_3$-,CHIF$_2$-)의 종류 및 농도변화에 따른 표면 특성 (접촉각, 발수도 등)의 변화를 관찰하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1651-1653
• /
• 1999

Room Temperature Vulcanizing (RTV) Silicone Rubber has been widely used to coat porcelain insulator to prevent formation water filming on insulator surface. and RTV silicone rubber has water repellency to suppress leakage current and consequent flashover. RTV silicone rubber's surface has been degradated by outdoor condition such as dust, salt, and water. etc. ESDD(Equivalent Salt Deposit Density) and leakage currents are increased by polymer surface toughness and degradation. In this paper, we investigated relations of surface toughness, ESDD, and leakage currents.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.6-8
• /
• 2001

This report describes the effect of the blending of poly(trifluoropropylmethylvinylsiloxane) (PTFPMVS) with poly(dimethylsiloxane) (PDMS) on the surface properties such as water repellency using dynamic contact angle (DCA) measurement. We have investigated the surface molecular mobility of the PDMS/PTFPMVS blends via a DCA measurement and an adhesion tension relaxation. It could be shown that a flexible side-chain segment in PTFPMVS having higher surface energy, could be reoriented easily in water to decrease the interfacial tension of the polymer/water interface, which seems to play a major role at the decrease of the receding contact angle and the surface resistivity of PDMS/PTFPMVS blends.