• International Journal of Industrial Entomology and Biomaterials
• /
• v.22 no.2
• /
• pp.39-44
• /
• 2011

To evaluate the growth rate of larval and pupal parameters of silkworm Bombyx mori fed with Silver Nanoparticles (AgNps) treated $MR_2$ mulberry leaves, the following works have been considered. The AgNp was synthesized by chemical reduction method, it was diluted by different concentrations such as 25%, 50%, 75% and 100% (without dilution). Fresh mulberry leaves (Morus alba L.) were sprayed by each concentration and were fed to silkworms, from $3^{rd}$, $4^{th}$ and $5^{th}$ instar, five feedings/day. Group $T_1$ larvae received $MR_2$ mulberry leaves sprayed with distilled water and served as control, group $T_2$, $T_3$, $T_4$ and $T_5$ larvae received 25%, 50%, 75% and 100% AgNps sprayed mulberry leaves, respectively. Silkworm larvae fed on M. alba ($MR_2$) leaves sprayed with 25% concentration of AgNps (group $T_2$) was significantly increased the larvae and cocoon length, width and weight as compared to those fed on control (group $T_1$) $MR_2$ mulberry leaves and other groups ($T_3$, $T_4$ and $T_5$). Hence, 25% AgNps dose was fixed as an effective dose. It has been observed from the present study that 25% AgNps treated (group $T_2$) leaves fed by silkworms have enhanced the larval and pupal growth and quantity of silk production than control.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.3
• /
• pp.389-396
• /
• 2021

In this paper, it was evaluated that the effect of self-healing microcapsules on the quality and healing properties of cement composites. In the mixing of microcapsules, the plastic viscosity and yield stress of the cement composites decreased due to the particle properties of the microcapsules, and decreased in proportion to the mixing ratio. The table flow showed a tendency to decrease as the core material acted as a stimulant due to the loss of microcapsules, and the compressive strength could be supplemented through unit quantity correction. As a result of evaluating the effect of microcapsule mixing on the healing properties of cement composites, it was found that the unit water flow rate decreased by the healing reaction immediately after crack initiation. When more than 3% of microcapsules were mixed, it was found that there was a healing rate of more than 95% at 7 days of healing age.

• Membrane and Water Treatment
• /
• v.10 no.1
• /
• pp.75-82
• /
• 2019

In a highly urbanized area, land availability is limited for the installation of space consuming stormwater systems for best management practices (BMPs), leading to the consideration of underground stormwater treatment devices connected to the stormwater pipe system. The configuration of a stormwater pipe network determines the hydrological and pollutant transport characteristics of the stormwater discharged through the pipe network, and thus should be an important design consideration for effective management of stormwater quantity and quality. This article presents a multi-objective optimization approach for designing a stormwater pipe network with on-line stormwater treatment devices to achieve an optimal trade-off between the total installation cost and the annual removal efficiency of total suspended solids (TSS). The Non-dominated Sorted Genetic Algorithm-II (NSGA-II) was adapted to solve the multi-objective optimization problem. The study site used to demonstrate the developed approach was a commercial area that has an existing pipe network with eight outfalls into an adjacent stream in Yongin City, South Korea. The stormwater management model (SWMM) was calibrated based on the data obtained from a subcatchment within the study area and was further used to simulate the flow rates and TSS discharge rates through a given pipe network for the entire study area. In the simulation, an underground stormwater treatment device was assumed to be installed at each outfall and sized proportional to the average flow rate at the outfall. The total installation cost for the pipes and underground devices was estimated based on empirical formulas using the flow rates and TSS discharge rates simulated by the SWMM. In the demonstration example, the installation cost could be reduced by up to 9% while the annual TSS removal efficiency could be increased by 4% compared to the original pipe network configuration. The annual TSS removal efficiency was relatively insensitive to the total installation cost in the Pareto-optimal solutions of the pipe network design. The results suggested that the installation cost of the pipes and stormwater treatment devices can be substantially reduced without significantly compromising the pollutant removal efficiency when the pipe network is optimally designed.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.1
• /
• pp.44-49
• /
• 2019

The purpose of this study is to analyze the fundamental characteristics of concrete with the change of reject ash(Reject ash=Rj) in the mixed aggregate where single grain aggregate of different grain size and aggregate of opposite grain size are mixed together, to analyze the possibility of a mixed aggregate system that premixes at an aggregate manufacturing plant and delivers it as one aggregate. As a result of the experimental study, it was found that the grain size regulation is satisfied if the mixed aggregate(CSb+SS) is substituted for about 5% of Rj. In the case of the fluidity slump, slump flow and air volume, it was found that they decrease as the substitution ratio of Rj increases, while the compressive strength increases as the substitution ratio of Rj increases. Therefore, it is analyzed that it would contribute greatly to an improvement of quality such as improvement of compressive strength if adequate fluidity and air quantity are secured by the water reducing agent and AE agent while premixing the Rj, which is disposed of by landfill, with about 5% of the mixed aggregate.

• Journal of Soil and Groundwater Environment
• /
• v.26 no.5
• /
• pp.60-76
• /
• 2021

The concept of resilience seems applicable for sustainable groundwater management. The resilience is broadly defined as the ability of a system to resist changes by external forces (EFs), and has been used for disaster management and climate change adaptation, including the groundwater resilience to climate change in countries where groundwater is a major water resource, whereas not yet in the geological society of South Korea. The resilience is qualitatively assessed using the absorptive, adaptive, and restorative capacity representing the internal robustness, self-organization, and external recovery resources, respectively, while quantitatively using the system impact (SI) and recovery effort (RE). When the groundwater is considered a complicated system where physicochemical, biological, and geological components interact, the groundwater resilience can be defined as the ability of groundwater to maintain the targeted quality and quantity at any EFs. For the quantitative assessment, however, the resilience should be specified to an EF and measurable parameters should be available for SI and RE. This study focused on groundwater resilience to two EFs in urban areas, i.e., pollution due to land use change and groundwater withdrawal for underground structures. The resilience to each EF was assessed using qualitative components, while measurements for SI and RE were discussed.

• Journal of Animal Science and Technology
• /
• v.62 no.6
• /
• pp.884-892
• /
• 2020

Corticosterone is known as a biological stress index in many species including birds. Feather corticosterone concentration (FCC) has increasingly been used as a measure for chronic stress status in broiler chickens. As sample preparation is the first step of analytical process, different techniques of feather matrix disruption need to be validated for obtaining better result in analysing corticosterone extraction. The current study was a validation of pulverizing the feather by bead beater (BB) and surgical scissors (SS) processing prior to corticosterone extraction in feather of broiler chickens. The type of feather processing prior to the hormone extraction may alter the final output. Thereby, finding a standard method according to laboratory facilities is pivotal. This study carried out to determine the effects of feather pulverization methods on the extraction amount of corticosterone in broiler chickens. Feathers were sampled from four weeks old Ross 308 broiler chickens (n = 12 birds). All broiler chickens were kept under the same environmental condition and had access to feed and water. Feather samples were assigned to one of the following processing methods 1) using a BB for pulverizing and 2) using a SS for chopping into tiny pieces. Each sample was duplicated into two wells during enzyme immunoassay (EIA) analysis to improve the accuracy of the obtained data. The results showed lower standard errors and constant output of FCC by using the BB method compared with the SS method. Overall comparison of FCC showed a significantly higher (p < 0.001) amount of the FCC in the BB compared with the SS. Overall, using the BB method is recommended over the SS method for feather processing due to the ability to homogenize a large number of samples simultaneously, ease of use and greater extraction of feather corticosterone.

• Design & Manufacturing
• /
• v.16 no.1
• /
• pp.55-61
• /
• 2022

As meters become digital and smart, energy data such as electricity, gas, heat, and water can be accurately and efficiently measured with a smart meter, providing consumers with data on energy used, so that real-time demand response and energy management services can be utilized. Although it is developing from a simple metering system to a smart metering industry to create a high value-added industry fused with ICT, illegal counterfeiting of electronic meters is causing problems in intelligent crimes such as manipulation and hacking of SW. The meter not only allows forgery of the meter data through arbitrary manipulation of the SW, but also leaves a fatal error in the metering performance, so that the OIML requires the validation of the SW from the authorized institution. In order to solve this problem, a quantitative confirmation device was developed in order to eradicate the act of cheating the fuel oil quantity through encoder pulse operation and program modulation, etc. In order to prevent the act of deceiving the lubricator, a device capable of checking pulse forgery was developed, manufactured, and verified. In addition, the performance of the device was verified by conducting an experiment on the meter being used in the actual field. It is judged that the developed quantitative confirmation device can be applied to other flow meters other than lubricators, and in this case, accurate measurement can be induced.

• Animal Bioscience
• /
• v.35 no.12
• /
• pp.1860-1870
• /
• 2022

Objective: The observation that temperate C₃ and tropical C₄ forage silages easily produce large amounts of ethanol or acetic acid has puzzled researchers for many years. Hence, this study aimed to assess the effects of epiphytic microbiota from C₃ forages (Italian ryegrass and oat) on fermentative products and bacterial community structure in C₄ forage (sorghum) silage. Methods: Through microbiota transplantation and γ-ray irradiation sterilization, the irradiated sorghum was treated: i) sterile distilled water (STSG); ii) epiphytic microbiota from sorghum (SGSG); iii) epiphytic microbiota from Italian ryegrass (SGIR); iv) epiphytic microbiota from oat (SGOT). Results: After 60 days, all the treated groups had high lactic acid (>63.0 g/kg dry matter [DM]) contents and low pH values (<3.70), acetic acid (<14.0 g/kg DM) and ammonia nitrogen (<80.0 g/kg total nitrogen) contents. Notably, SGIR (59.8 g/kg DM) and SGOT (77.6 g/kg DM) had significantly (p<0.05) higher ethanol concentrations than SGSG (14.2 g/kg DM) on day 60. After 60 days, Lactobacillus were predominant genus in three treated groups. Higher proportions of Chishuiella (12.9%) and Chryseobacterium (7.33%) were first found in silages. The ethanol contents had a positive correlation (p<0.05) with the abundances of Chishuiella, Acinetobacter, Stenotrophomonas, Chryseobacterium, and Sphingobacterium. Conclusion: The epiphytic bacteria on raw materials played important roles in influencing the silage fermentation products between temperate C₃ and tropical C₄ forages. The quantity and activity of hetero-fermentative Lactobacillus, Chishuiella, Acinetobacter, Stenotrophomonas, Chryseobacterium, and Sphingobacterium may be the key factors for the higher ethanol contents and DM loss in silages.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.10 no.1
• /
• pp.169-181
• /
• 2008

The purpose of this study was to produce Pleurotus ostreatus using fermenter with bag cultivation. These results are as follows. 1. While mushroom composts were being fermented in a fermenter, the physical property of the fermented composts was getting better when there isn't any screw or revolving flies in the fermenter and the strength of pressing the composts was getting less. 2. The composts were fermented well as slaked lime of 1% density added to the composts. 3. According to the result of examining our fermenting ways, composts were in the best condition after being fermented for 48 hours since the temperature in a fermenter has come to 60℃, which could be reached by heating the fermenter by 40℃ after putting compost materials and water into it. 4. The good condition of fermenting could be maintained by controlling the speed of revolving flies, therefore the speed be down when the temperature is above 60℃ and up bellow 60℃. 5. Since the composts had been added with 1.5~2% of cottonseed meal or rice bran, the fermented composts were in good condition and also the quantity and quality of the mushroom produced on the fermented composts were satisfied. 6. There were needed 7 hours of labour for 3days from the first day of putting composts into a fermenter for fermenting 3.5M/T(10,000~12,000bags of 750~800g per bag) of composts to the third day of finishing the fermenting work, and also the cost was 112,066￦(130$) including 52,066￦(60$) of electric charge and fuel expense.

• Microbiology and Biotechnology Letters
• /
• v.52 no.2
• /
• pp.152-162
• /
• 2024

The microbial starter used to produce kefir beverages, kefir grain, contains a microbial exopolysaccharide called kefiran. Kefir grain consisting of water-insoluble polysaccharides, proteins, and fats, which can be applied as a multi-functional biopolymer. The mass of kefir grain can increase in the fermentation process of Kefir, but it is considered very slow. The purpose of this research is to study the impact of ammonium sulfate supplementation and yeast extract on reconstituted skim milk to increase the mass kefir grain and physical properties of kefiran. Results showed that the ammonium sulfate-supplemented substrate increased the mass of kefir grain by 547% in 14 days, with the condition that the substrate must be renewed every 2 days. Refreshing the substrate is considered one of the important factors. Supplementation on substrate did not appear to affect the viability of bacterial and yeast cells. Kefir grain produced from supplemented substrate also yields better thermal stability properties and has more functional groups than without supplementation. Two Lacticaseibacillus rhamnosus (RAL27 and RAL43) and one Limosilactobacillus fermentum (RAL29) were found to produce EPS. The three isolates also showed good skim milk fermentation ability after purification from kefir grain. The kefir grain produced in this study has the potential for wider application. This study also showed that kefir grain can be adjusted in quantity and quality through fermentation substrate engineering.