본 연구에서는 염수 침수 실험과 염수 분무 실험이라는 두 가지의 실험을 위그선의 구조재료로 사용될 3가지 다른 복합재료 시스템에 대해서 해수와의 접촉에 의한 물성저하를재현하기 위해 수행하였다. 140일간 염수환경하에서 노화시킨 후 탄소섬유 복합재료와유리섬유 복합재료의 인장, 압축, 전단 강성과 강도 및 층간 전단 강도를 측정하였다. 기본 물성파의 비교를 통해서 염수환경이 복합재료의 기계적 물성에 미치는 영향이 평가되었다. 실험을 통해 염수 분무환경과 침수 환경의 차이는 거의 영향을 미치지 않음을 확인하였다. 탄소섬유 복합재료의 경우 인장 물성에 적은 손실이 발생한 반면 유리섬유 복합재료에서는 인장물성의 저하률이 탄소섬유 복합재료에 비해서 큼을 확인하였다. 그리고 모재 지배적 물성들의 큰 물성저하가 관찰되었다. 이를 통해, 염수는 복합재료의 섬유와 모재 사이의 계면을 퇴화시키고, 또한 모재 자체 물성과 유리섬유의 물성을 저하시킬 수 있음을 확인하였다.
염수시험기를 통해 6개월 동안 염수분무시험과 염수침수시험을 수행함으로써 염수환경에 노출된 유리섬유직물페놀 복합재의 내구성을 실험적으로 조사하였다. 이때 염수환경에 노출된 시간에 따른 인장특성, 굽힘특성, 전단특성 등의 기계적 특성을 평가하고 동역학 측정장치를 적용하여 저장전단탄성계수. 손실전단탄성계수, tan $\delta$ 등의 열분석 특성을 측정하였다. 또한 적외선 분광분석기를 적용하여 염수환경에의 노출시간에 따른 화학구조의 변화를 분석하였다. 연구결과에 따르면 기계적 특성과 열분성 특성은 노출시간에 민감하게 변하며 노출시간이 길어짐에 따라 점차 감소되는 양상을 나타낸다. 그러나 강성의 경우에는 염수환경에 노출되면 복합재의 가소화로 인해 노출의 초기에는 감소하기 시작하고 노출시간이 길어짐에 따라 복합재의 팽창, 수지의 소성화, 가교 결합의 증가 등으로 인해 다소 증가하는 양상을 나타내지만 노출시간이 더욱 더 길어지면 점차 감소할 것으로 추측된다. 또한 FT-IR 선도에서의 피크 형상과 위치는 노출시간에 큰 영향을 받지 않으며 피크 세기는 노출시간에 따라 달라진다. 마지막으로 염수침수환경은 염수분무환경에 비해 유리섬유직물/복합재의 내구성에 더욱 심각한 영향을 미침을 알 수 있었다.
광산이 폐광을 하는 경우 배수시스템을 정지함으로 인해 갱도는 물로 포화된다. 갱도가 포화되었을 때 갱도 주변의 암석은 완전히 포화되고 갱도 주변 암반에는 수압이 작용한다. 암석의 일축압축강도는 함수율에 따라 달라지며 함수율이 증가함에 따라 감소한다. 수압은 암석 내 균열이나 암반 내 불연속면의 확장을 유발하게 된다. 갱도 내 포화된 수압이 지보압을 발휘할 수도 있지만 지하수에 의해 발생한 암반 물성의 저하는 갱도의 안정성을 감소시킬 것이다. 본 연구에서는 수압에 의해 발생한 갱도 주변 암반의 물성 저하가 갱도의 안정성에 미치는 영향을 평가하기 위하여 2차원 불연속해석과 3차원 연속해석을 실시하였다. 수치해석 결과 수압에 의해 유발된 갱도 주변 암반의 물성 저하는 갱도 주변 암반의 변위 증가에 영향을 미치고, 2차원 해석 결과는 3차원 해석 결과 보다 큰 변위를 나타냈다.
The pulp mold attract the increasing concern as recyclable, biodegradable, and eco-friendly packaging materials. In order to broaden the applicability of the pulp mold as substitutes of the expanded styrofoam, the properties of various raw materials for the pulp mold were evaluated and the way for improving water resistance properties of the pulp mold were also tested by applying some additives. The higher value in the fines contents and in the water retention value were shown for the TMP (thermomechanical pulp), which resulted in the bulkier pulp mold with the higher moisture absorption property. In case of water resistance properties, the pulp mold made of white ledger stock showed the higher value in water contact angle and very slow water absorption rate. The addition of oil palm EFB fiber showed the improvement in the water resistance of the pulp mold made of UBKP. The effects of various additives on the improvement in the water resistance properties of the pulp mold were tested by using AKD, PVAm, epoxy resin. The application of AKD leaded to the higher increase in the water resistance. The results in this study showed the effects of AKD for the pulp mold could be improved and optimized by the application with fixing agent and by the ageing treatment after production.
The purpose of this study is to elucidate the source of U anormaly formed in stream water of the drainage system around the Shinbo talc mine area based on the hydrochemical properties of water masses including surface water and groundwater. The hydrochemical properties of water masses in the Shinbo talc mine area are divide into three types; Type I : $Ca(Mg)SO_4$ type with high U content as shown in the stream water flowout from the mine, Type II : $Ca(HCO_3)_2$ type with high U content as in deep groundwater, Type III : $Ca(HCO_3)_2$, type with low U content as in the other stream water and shallow groundwater. It is necessary to emphasize that in deducing the uranium source, a distinct discrimination between type I and type II is showed in their hydrothermal properties in spite of commonly having a high uranium content, which in turn means the occurrence of a different water-rock interaction processes between both type. All evidences suggest that type II groundwater have acted as a primary media in the transport of uranium and that, as the groundwater flows through the talc mineralization zone, water composition of type II was transformed into that of type I water as the results of a secondary water rock interaction process, caused by imposition of new mineralogically controlled thermodynamic constraints. Consequently, in the viewpoint of hydrochemical exploration, the investigation of the hydrologic circulation system and the hydrogeologic properties for the aquifer of type II groundwater shall be done first of all and will provide a crucial clue on tracing the uranium mineralization zone occurred in the Shinbo talc mine area.
After passing through a magnetic field, the physical quality of water improves, and magnetic water (MW) is produced. There are many investigations on the effects of magnetic field on water that shows MW properties like saturation and memory effect. This study investigates the fresh and hardened properties of concrete mixed with MW, which contains silica fume (SF) and superplasticizer (SP). The test variables included the magnetic field intensity for producing MW (three kinds of water), SF content replaced cement (0 and 10 percent), water-to-cementitious materials ratio (W/CM=0.25, 0.35 and 0.45) and curing time (7, 28 and 90 days). The results of this study show that MW had a positive impact on the workability and compressive strength of concrete. By rising the intensity of the magnetic field which was used for producing MW, its positive influence on both workability and compressive strength improved. MW had greater positive impacts on samples containing SP that did not have SF. Moreover, the best compressive strength improvements of concrete achieved as W/CM ratio decreased.
The purpose of this study is to ascertain the strength properties of water-permeable polymer concretes with SBR latex and redispersible polymer powder. The water-permeable polymer concretes using SBR latex and redispersible polymer powder with water-binder ratio of 29%, polymer-cement ratios of 0, 5, 10, 15 and 20% are prepared, and tested for compressive strength, tensile strength, flexural strength, water permeability. From the test results, improvements in the strength properties of the water-permeable polymer concretes due to the addition of the SBR latex and redispersible polymer powder are discussed.
In this work, we examine pure water and water with nanoparticles to investigate water lubrication characteristics and the effect of nanoparticles as lubricant additives for different substrates. We test carbon-based coatings and metals such as high-speed steel and stainless steel in pure deionized (DI) water and DI water with nanoparticles. We investigate water lubrication characteristics and the effect of nanoparticles based on the friction coefficient and wear rate for different substrates. The investigation reveals that nanoparticles enhance the friction and wear properties of high-speed steel and stainless steel. The friction coefficient and wear rate of both high-speed steel and stainless steel decreases in DI water with nanoparticles compared with the results in pure DI water. The presence of nanoparticles in water show good lubricating effect at the contact area for both high-speed steel and stainless steel. However, for carbon-based coatings, nanoparticles do not improve friction and wear properties. Rather, the friction coefficient and wear rate increases with an increase in the concentration of nanoparticles in case of water lubrication. Because carbon-based coatings already have good tribological properties in a water environment, nanoparticles in water do not contribute toward improving the friction and wear properties of carbon-based coatings.
붕산은 폴리비닐알코올(PVA)의 히드록시기간의 가교를 형성할 수 있기 때문에 PVA용액내에 가입되면 용액의 유변학적 특성에 큰 영향을 미친다. 본 연구에서는 양이온이 존재하지 않는 경우 PVA/디메틸술폭시드(DMSO)/물/붕산계에 있어서 물의 함량이 유변학적 특성에 미치는 영향을 조사하였다. PVA/DMSO/물계에 붕산을 1 wt.% 첨가할 경우 물 함량이 증가할 수록 점도가 급속히 감소하였다. PVA/DMSO계에 1 wt.%의 붕산이 가입된 경우 양이온이 없어도 강한 가교구조를 형성하여 탄성겔의 점탄성특성을 나타낸 반면 PVA/물계에 1 wt.%의 붕산이 가입된 경우 전형적인 점성물질의 특성을 나타냈다. 순수한 DMSO나 혼합용매중 DMSO의 함량이 높으면 양이온의 존재없이도 붕산첨가에 의해 가교구조를 형성하여 급격한 점도변화를 나타냈으나 물 함량이 풍부한 계에서는 붕산의 첨가에 따른 점도의 변화가 미약하였으며 순수한 물을 용매로 사용한 경우 붕산첨가의 영향이 거의 없었다. 저장탄성률도 PVA/DMSO계의 경우가 가장 높은 값을 보였고 혼합용매계에는 물함량이 증가할 수록 감소하였다.
Water and soil properties in paddy fields subjected to organic and conventional farming were characterized over the rice cycle in South Korea. To achieve the goals of this study, we sampled and analyzed soil and water from 24 organic paddy plots and 11 conventional paddy plots in March, May, August, and October 2016. The results were analyzed using statistical analyses, including analysis of variance (ANOVA), cluster analysis, and principal component analysis. The ANOVA results showed that water content (WC), electrical conductivity (EC), organic matter (OM), and available phosphorus ($P_2O_5$) in soil varied significantly (p < 0.01) depending on the farming method. Higher OM, EC, and $P_2O_5$ of soil were observed in the conventional paddies than in the organic paddies. All soil properties, except pH and ammonium, depended on seasonal variation. Cluster analysis revealed that soil properties in May were distinctly separated from those in other seasons mainly due to basal fertilization. The principal component analysis distinguished the soil properties in different seasons, but such a distinction was not observed between the soil properties in organic and conventional paddies. Low contents of WC, OM, and total N were observed in March. High concentrations of nitrate and total P were observed in May, but these were low in August and October. The soils from October were also characterized by high concentrations of EC and $P_2O_5$. These results indicate that the sampling time for soil and water can significantly influence the evaluation of soil properties with different farming methods.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.