• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.2
• /
• pp.329-338
• /
• 1993

The purpose of this study was to design an instrument to simulate the Human-Clothing-Environment system and evaluate the water vapour transport properties of sweat absorbent PET fabrics. The instrument was composed of sweat generating part, clothing part which can simulate clothing layers, and enviromental part. As specimens, sweat absorbent PET, regular PET, cotton, nylon and acrylics fabrics were included. For the water vapour transport(WVT), relative humidities and temperatures were measured by film type humidity sensors and thermocouples, respectively. Water vapour pressures were calculated with measured RH's and temperatures. For the liquid water transport, wickability and demand wettability were measured. Results showed that there was a difference in terms of water vapour transport mechanism depending on the fiber type ; sweat absorbent PET showed higher WVT at the transient period then equilibrated, whereas other fabrics showed lower WVT at the transient period then increased continuously. These differences are expected to affect to the difference in the comfort properties of clothings. Sweat absorbent PET showed higher demand wettability and wickability than other fabrics. Wide application of the instrument was also suggested.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.847-854
• /
• 2004

The resistivity of soils depends on grains size, porosity, water saturation, pore fluid resistivity, caly contents and son on. It is very important to understand the relationship between resistivity and such physical properties of soils, in order to interpret and evaluate ground conditions by using resistivity data obtained from electrical resistivity prospecting. In this paper, to study the relationship between resistivity and physical properties of soils, the resistivity of glass beads and compacted soil samples both in saturated and unsaturated conditions is measured. As the results, the resistivity of saturated soils depends mainly on porosity and clay contents, while that of unsaturated soils is sensitive to compaction conditions, and decreases with increasing water content until the optimum water condition, that is the maximum dry density. But, the relationship between resistivity and water saturation for soils is unique, being independent of compaction energy. Also, the resistivity ratio decrease with increasing water saturation, followed by no significant change of resistivity ratio over 80 percent of water saturation (the optimum water content).

• Journal of the Korean Society for Railway
• /
• v.13 no.4
• /
• pp.357-362
• /
• 2010

The railroad that represents modern industry began appearing in 1899. However, after the steam locomotive that provided water stopped the service, the water towers within the railroad station were useless. Suggestions presented in this study for activating the environment around the water towers that are designated as the cultural properties results are as followed: 1) The place where people can experience the vestiges of Korean War and the region that different novels accommodated. 2) A plaza 3) A facility for exhibition of industry inheritance and local products 4) A local landmark 5) Reproduction of the historical steam locomotive and water tower Local residents should participate in the activation process. And the designer should consider the environmental context. In addition, the activation of water towers should be designed under an urban plan.

• Journal of the Korea Concrete Institute
• /
• v.14 no.3
• /
• pp.402-408
• /
• 2002

The permeable polymer-modified concrete has a lot of internal voids, which has more excellent performance in permeability and durability than asphalt and cement concrete. Therefore, the purpose of this study is to ascertain the strength properties of water-permeable polymer concretes with SBR latex and redispersible polymer powder. The water-permeable polymer concretes using SBR latex and redispersible polymer powder with water-binder ratio of 29 ％, polymer-cement ratios of 0, 5, 10, 15 and 20 ％ are prepared, and tested for compressive strength, splitting tensile strength, flexural strength, water permeablility. From the test results, improvements in the strength properties of the water-permeable polymer concretes due to the addition of the SBR latex and redispersible polymer powder are discussed.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.5
• /
• pp.810-816
• /
• 1996

This study was conducted to measure the hydration characteristics at $20^{\circ}C$ and investigated the effect of water to rice ratio(v/w) on the texture properties of cooked rice of ten different varieties based on maturity. Water absorptions during soaking were completed between 30min and 35min at $20^{\circ}C$. The ranges of equilibrium moisture content were between 0.3247g $H_2O/g$ dry matter and 0.3577g H201g dry matter. During the cooking process, the water content of cooked rice increased 6~7% with increased the ratio of water to rice from 1.4 to 1.6(v/w). The hardness(H) of cooked rice decreased, while the stickiness(-H) and -H/H ratio increased with increased ratio of water to rice.

• Journal of the Korean Society of Safety
• /
• v.29 no.4
• /
• pp.103-109
• /
• 2014

In this study, two types of water-soluble sulfur, LSA and LSB, were developed and the influence of the water-soluble sulfur on the mechanical properties and durability of concrete were experimentally evaluated. In order to evaluate mechanical properties and carbonation resistance of concrete with water-soluble sulfur, compressive strength test, flexural strength test, bonding strength test, and carbonation resistance test were performed. Compressive strength of only concrete with 1% LSA was increased while that of concrete with LSB was proportionally increased with the higher LSB dosage. On the other hand, flexural strength of concrete with LSA and LSB was increased by 12-41% and 36-74%, respectively. Carbonation resistance of concrete with water-soluble sulfur were increased by 25-66%. As a result, it should be noted that the water-soluble sulfur can not only solve the demerit of sulfur concrete but also offer the durability of sulfur concrete.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.5
• /
• pp.555-563
• /
• 2016

Uniformity and leveled distributions of soil chemicals across paddy fields are critical to manage optimal crop yields, reduce environmental risks and efficiently use water in rice cultivation. In this study, an investigation of spatial distributions on soil chemical properties was conducted to evaluate the effect of land leveling on mitigation of soil chemical property heterogeneity from a remodeled paddy field. The spatial variabilities of chemical properties were analyzed by geostatistical analyses; semivariograms and kriged simulations. The soil samples were taken from a 1 ha paddy field before and after land leveling with sufficient water. The study site was located at Bon-ri site of Dalseong and river sediments were dredged from Nakdong river basins. The sediments were buried into the paddy field after 50 cm of top soils at the paddy field were removed. The top soils were recovered after the sediments were piled up. In order to obtain the most accurate spatial field information, the soil samples were taken at every 5 m by 5 m grid point and total number of samples was 100 before and after land leveling with sufficient water. Soil pH increased from 6.59 to 6.85. Geostatistical analyses showed that chemical distributions had a high spatial dependence within a paddy field. The parameters of semivariogram analysis showed similar trends across the properties except pH comparing results from before and after land leveling. These properties had smaller "sill" values and greater "range" values after land leveling than ones from before land leveling. These results can be interpreted as land leveling induced more homogeneous distributions of soil chemical properties. The homogeneous distributions were confirmed by kriged simulations and distribution maps. As a conclusion, land leveling with sufficient water may induce better managements of fertilizer and water use in rice cultivation at disturbed paddy fields.

• Tribology and Lubricants
• /
• v.27 no.5
• /
• pp.275-280
• /
• 2011

Automotive wheel bearing grease helps to reduce stresses and prevent wear of wheel bearings. But it is easily contaminated by water and other contaminants. In this study, we investigated the property change of automotive wheel bearing grease under water contamination. The result showed that some properties such as dropping point, work penetration and oxidation stability were not influenced by water content. However, most of properties such as work stability, water washout characteristics, leakage tendency, oil separation, evaporation loss and rust protection became worse after water was added. This is thought that added water makes the interaction weak between thickener and base oil of grease.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.27-30
• /
• 2003

This study is investigated the various properties and drying shrinkage of concrete according to water content under the condition proper fluidity is adjusted, in order to suggest the method for reduction of crack by drying shrinkage. According to the results, though water content varies, slump and air content are satisfied to the planed values, but shear slump and separation happen at water content of 120 and 140kg/$m^3$ due to the overuse of superplasticizer(SP). As water content is diminished, setting time is retarded by an increase of the using amount of SP, and compressive and tensile strength increase in the range of 160-180kg/㎥ of water content, but decrease significantly at 120 and 140kg/$m^3$. Length change by drying shrinkage decrease with a decrease of water content. Therefore, considering not only drying shrinkage but also fluidity, setting time and strength, it proves that the most appropriate water content of concrete is 160kg/$m^3$ in the condition of this experiment.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.3 no.2
• /
• pp.37-41
• /
• 1979

In order to obtain tasic information for solvent dyeing, polyethylene terephthalate (PET) films was pretreated with water, tetrachloroethylene (TCE) and water/TCE emulsion for three hours at $140^{\circ}C$ for stabilizing the substrate. By film roll cyliderical method, Disperse Red 60, Disperse Yellow 42, and Disperse Blue 27 were diffused in the films and examined dyeing properties. The results are summarized as follows; 1) Diffusion coefficient increases in the order, waterTCE>water/TCE 2) A linear relationship between diffusion coefficient and shrinkage was Observed 3) The temperature dependence of the diffusion coefficient can't be expressed by WLF equation.