As an electrochemical water electrolysis for green hydrogen production, both polymer electrolyte membrane (PEM) and alkaline electrolyte are being developed extensively in various countries. The PEM electrolyzer with high current density (above 2 A/cm2) has the advantage of being able to design a simple structure. Also, it is known that it has high response to electrical output fluctuations. However, the cost problem of major components is the most important issue that a PEM electrolyzer must overcome. Instantly, there are platinum group metal (PGM)-based electrocatalysts, fluorine-based polyfluoro sulfuric acid (PFSA) membrane, Ti felt (porous transport layer, PTL) and so on. Another challenging issue is productivity. A securing outstanding productivity brings price benefits of the electrolytic cells. From this point of view, we conducted basic studies on manufacturing electrode and membrane electrode assembly (MEA) for PEM electrolyzer production.
Beekeeping has been practiced for centuries in Ethiopia. Currently, there are three broad classification of honey production systems in Ethiopia; these are traditional (forest and backyard), transitional(intermediate) and modern(frame beehive) systems. Ethiopian honey production is characterized by the widespread use of traditional technology resulting in relatively low honey yield and poor honey quality. Despite the challenges and constraints, Ethiopia has the largest bee population in Africa with over 10 million bee colonies, of which 5 to 7.5million are hived while the remaining exists in the wild. Consequently, these figures, indeed, has put Ethiopia as the leading honey and beeswax producer in Africa. In fact, Ethiopia has even bigger potential than the current honey production due to the availability of plenty apicultural resources such as natural forests with adequate apiculture flora, water resources and a high number of existing bee colonies. However, lack of well-trained man powers, lack of standardization, problems associated with honey bee pests and diseases, high price and limited availability of modern beekeeping equipment's for beekeepers and absconding and migration of bee colonies are some of the major constraints reported for beekeeping in Ethiopia. In this review, an attempt was made to present all beekeeping practices in Ethiopia. The opportunities and major constraints of the sector were also discussed.
The steel wire or steel bar processing process applied to the manufacture of various bolts and power transmission shafts was improved by applying in-line phosphate film treatment technology. By applying a polymer lubricant for a non-reactive metal forming process and a non-reactive non-phosphorus lubricating coating agent, the film formation for each process time was comparatively analyzed and reviewed. Compared to the nine processes applied previously, the in-line phosphate film treatment technology applied with only two processes has been effectively improved in terms of reduction of treatment time, reduction of facility installation area, prevention of water pollution due to wastewater, and non-use of ozone-depleting substances. In addition, it was found that it can have an important effect on productivity improvement and price competitiveness from the simplification of quality control and process control as well as improvement of the working environment.
밭농사의 다원적 기능중 재해방지인 홍수방지 기능과 수자원함양 기능에 대하여 기존에 보고된 결과를 수정 보완하였으며, 계량화 평가 방법간 비교 분석한 결과를 요약하면 다음과 같다. 1. 밭농사의 홍수조절 기능을 분석하기 위하여 (1) 홍수가세 강우량-물 유출량A(I-1), (2) 작토층 깊이${\times}$기상율(I-2), (3) 홍수가세 강우량-물 유출량B(I-3), (4) 작토층 깊이${\times}$유효공극율(I-4)을 검토하였으며, 이중 모형식 I-1이 물 유출량에 대한 데이터의 유용성이나 실제 홍수조절 기능을 평가하는데 있어서 가장 적합할 것으로 판단되었다. 2. 밭농사 수자원함양 기능을 평가하기 위하여 (1) [포화수리전도도${\times}$투수기간${\times}$(1-하천유입율)](II-1), (2) [강수량${\times}$지하수 함양율${\times}$(밭면적/총국토면적)](II-2), (3) [토양수분보유량(입목지)-토양수분보유량(무입목지)](II-3)을 검토하였다. 이중 모형식 II-1이 자료의 유용성이나 지하수함양 기여율을 고려해 볼 때 수자원함양 기능을 평가하는데 가장 적합할 것으로 생각되었다. 3. 모형식 I-1에 의해 평가된 밭농사의 홍수조절량은 연간 ha 당 883 Mg이었으며 우리 나라 밭 전체로는 645 백만 Mg에 해당되었다. 모형식 II-1에 의해 평가된 수자원함양량은 연간 ha당 94.1 Mg었으며, 우리 나라 밭 전체로는 69 백만 Mg 이었다. 4. 밭농사에 의한 다원적 기능을 대체법에 의해 경제적 가치를 평가하였는데, 밭농사의 홍수조절 기능을 다목적 댐 건설비용으로 계산할 경우 1조 4283억원으로 평가되었으며, 수자원함양 기능을 물 값을 적용하여 평가할 경우 86억원에 해당되었다.
비시장재의 변화에 의한 후생변화 측정치로서 쓰이는 지불의사(WTP)와 수용의사(WTA) 개념은 경제이론적으로는 소득효과가 크지 않다면 서로 크게 다르지 않을 것이라고 예측되고 있다. 그러나 실증분석결과들은 WTA 측정치가 WTP의 측정치보다 훨씬 큰 것으로 관찰되고 있다. 본 연구는 우리나라에서는 처음으로 실험시장접근법을 사용하여 비시장재의 하나인 먹는 물에 잔류가능성이 있는 유해물질(비소, 납, 트리할로메탄 중의 하나)로부터의 건강위험변화에 대한 WTP와 WTA를 측정하고 이 두 측정치에 차이가 존재하는지 실증적으로 분석하였다. 대학생들 15명씩의 참가자들을 대상으로 총 여섯 번의 실험시장을 개설하였다. 시장거래경험의 유무에 따른 차이를 검증하고자 사적 시장재인 캔디바 실험경매도 도입하였고, 반복경험에 따른 학습효과를 관찰하기 위하여 20번의 실험경매를 시도하였고, 정보제공효과를 관찰하기 위하여 10번째 경매 후에 객관적 건강위험에 관한 확률정보를 제공하였다. 시장재 비시장재의 구분없이 첫 번째 실험경매에서는 WTA가 통계적으로 유의하게 WTP를 초과하였다. 실험경매가 진행됨에 따라 사적 시장재는 WTA와 WTP의 차이가 사라지고 시장평균가격에 수렴하였다. 그러나 비시장재인 건강위험변화에 대한 결과는 혼재되어 있었다. 건강위험이 가장 큰 비소에 대해서는 건강위험 감소에 대한 WTP가 건강위험 증가에 대한 WTA보다 통계적으로 유의하게 적었다. 반면에 건강위험이 상대적으로 적은 납과 트리할로메탄에 대해서는 WTP와 WTA의 평균이 같다는 귀무가설을 기각할 수 없었다. 실험참가자들은 실험경매 중간에 제공된 건강위험정보에 대해 합리적으로 반응하였고, 실험경매가 진행됨에 따라 경험획득에 의한 학습효과도 긍정적이었다. WTP는 실험 초반에 학습효과가 주로 관찰된 반면에 WTA 측정치는 실험경매 후반에 학습효과가 관찰되었다.
본 연구에서는 하천유역에서 소수력 개발 대상지점에서의 최적규모를 결정하는 방안을 제시하였다. 제시된 방안은 지형 및 수문자료의 구축, 발전소 모의운영, 경제성분석, 최적규모 결정과 같은 일련의 절차로 이루어진다. 최적규모 결정을 위해 경제성 평가지표 가운데 하나인 순현가를 이용하였고, 이를 통해 최적 설계유량과 시설물의 최적규모를 도출하였다. 초기비용의 산출을 위하여 기존 소수력발전소의 비용 자료를 검토하여 함수식을 개발하였고, 편익 산정시 현재 공시된 전력 기준단가를 이용하였다. 이러한 일련의 절차를 기존에 조사된 금강수계의 초강유역에 위치한 댐식, 수로식 소수력 지점 2개소에 적용하였으며, 최종적으로 설계유량과 시설물의 규모 변화에 따른 NPV 민감도를 확인하여 최적규모를 결정하였다. 본 연구에서 제시한 방법은 소수력 개발지점에서의 최적규모 및 경제성 여부를 사업추진 이전에 개략 추정하여 잠재수력 부존량을 확인함으로써 사업시행주체의 의사결정 지원 측면에서 활용도가 높을 것으로 기대된다.
최근 시멘트 및 골재 등 원재료 값의 상승 및 세계적인 유가 급등으로 인한 운송비의 증가로 레미콘 제조원가는 상승하고 있다. 그러나 레미콘 제조업체들 간의 과다한 경쟁으로 인해 레미콘의 납품 단가는 오히려 낮아지고 있는 실정이다. 이를 극복하기 위한 일환으로 레미콘 제조업체들은 레미콘의 제조원가를 최소한으로 줄이고자 하는 노력 중 하나로 고로슬래그 미분말 및 플라이애시를 혼화재로 사용하는 업체가 증가하고 있다. 그러나 이러한 광물질 혼화재를 사용한 콘크리트의 품질관리에 대한 연구는 미흡한 실정이다. 따라서, 본 연구에서는 고로슬래그 미분말 혼합 콘크리트의 28일 압축강도를 조기에 예측하기 위해 촉진양법을 이용하였다. 고로슬래그 미분말 혼합률 별로 선형회귀분석을 실시하여 추정식을 제시하였고 90%의 신뢰구간을 나타내었다. 또한 실험의 신뢰성을 높이기 위해 모든 배합은 3회 반복하였고, 배합순서는 랜덤추출법을 사용하였다. 이러한 실험결과 촉진양생법에 의한 1일 촉진강도로서 고로슬래그 미분말 혼합 콘크리트의 재령 28일 압축강도를 예측할 수 있는 추정식의 신뢰성을 확인하는 성과를 얻었다.
Purpose: With the ever-rising energy prices, thermal energy heavily consuming facilities of the agricultural sector such as commercialized greenhouses and large-scale Rice Processing Complexes (RPCs) need to cut down their energy cost if they must run profitable businesses continually. One possible way to reduce their energy cost is to utilize combustible agricultural by-products or low-price oil instead of light oil as the fuel for their boiler systems. This study aims to analyze the heavy oil combustion characteristics of a newly developed hot water boiler system that can use both rice husk and heavy oil as its fuel convertibly. Methods: Heavy oil combustion experiments were conducted in this study employing four fuel feed rates (7.6, 8.5, 9.5, 11.4 $l/h$) at a combustion furnace vacuum pressure of 500 Pa and with four combustion furnace vacuum pressures (375, 500, 625, 750 Pa) at fuel feed rates of 9.5 and 11.4 $l/h$. Temperatures at five locations inside the combustion furnace and 20 additional locations throughout the whole hot water boiler system were measured to ascertain the combustion characteristics of the heavy oil. From the temperature measurement data, the thermal efficiency of the system was calculated. Flue gas smoke density and concentrations of air-polluting components in the flue gas were also measured by a gas analyzer. Results: As the fuel feed rate or combustion furnace vacuum pressure increased, the average temperature in the combustion furnace decreased but the thermal efficiency of the system showed no distinctive change. On the other hand, the thermal efficiency of the system was inversely proportionally to the vacuum level in the furnace. For all experimental conditions, the thermal efficiency remained in the range of 80.1-89.6%. The CO concentration in the flue gas was negligibly low. The NO and $SO_2$ concentration as well as the smoke density met the legal requirements. Conclusions: Considering the combustion temperature characteristics, thermal efficiency, and flue gas composition, the optimal combustion condition of the system seemed to be either the fuel feed rate of 9.5 $l/h$ with a combustion furnace vacuum pressure of 375 Pa or a fuel feed rate of 11.4 $l/h$ with a furnace vacuum pressure between 500 Pa and 625 Pa.
자동차부품 세척장비는 엔진과 변속기 블록 등의 가공과정에서 잔류하는 기름때를 제거하며, 잦은 수류방향 전환과 고압수의 분사를 위해 한 쌍의 2 방향 밸브를 사용한다. 그러나 정교한 밸브제어장치 없이 2 방향 밸브를 사용하는 경우 급격한 수류방향 전환에 따른 맥동현상이 발생하여 사용에 어려움이 따른다. 대안으로 하나의 3 방향 절환밸브를 사용하는 방법은 정교한 제어장치 없이도 정확한 수류방향 절환이 원활히 이루어져 이러한 문제점을 해결할 수 있다. 그러나 복잡한 유로 및 바텀플러그 형상으로 인해 유속변화가 심하게 발생하여 공동현상이 나타날 수 있다. 본 연구에서는 3 방향 절환밸브 내의 유동특성을 해석적으로 평가하였으며, 바텀플러그 하부에서 나타나는 공동현상을 공동화지표와 POC(Percent of cavitation)를 도입하여 정량화하였다. 공동현상의 저감을 위해 바텀플러그 형상을 매개변수화하고, 해석의 수렴성 개선과 해석시간을 단축시킬 수 있는 단순 유한요소모델을 이용하여 유동해석을 통한 형상최적설계를 실시하였다. 완전요인배치법을 통한 실험계획법과 인공신경망 기반 반응표면모델을 적용하여 공동현상이 발생하지 않는 POC 가 30% 미만인 바텀플러그의 형상을 제시하였다. 얻어진 최적해는 POC 27%에 대하여 바텀플러그의 허리길이와 꼬리길이가 각각 6.42mm 및 6.96mm 이다.
Journal of the Korean Data and Information Science Society
/
제28권4호
/
pp.811-818
/
2017
환경시험은 시험대상품이 수명주기 동안 겪을 수 있는 환경에 노출되었을 때 정상기능을 수행할 수 있는지 확인하는 과정이다. 군수품의 경우 민수품과는 달리 극한 환경에 노출되는 경우가 많으므로 환경시험에 대한 중요성은 상당히 높다고 할 수 있다. 하지만, 한반도 내에서 운용하는 무기체계 환경시험 기준 설정을 위한 기후 데이터는 거의 없는 실정이다. 수출용 군수품의 경우 운용 환경이 전 세계이므로 전 세계 기후 데이터 기반으로 환경시험 기준을 테일러링 하는 것이 타당하다, 그러나 국내에서만 사용하는 군수품을 전 세계적 환경시험 기준으로 설계/제작할 경우 과도한 설계로 인해 불필요한 비용이 발생할 수 있다. 따라서, 본 논문에서는 한반도 주변 해수의 온도와 염분에 대한 분석 결과를 제시하였다. 이 분석을 통해 환경시험 중 염수분무시험 기준으로 활용할 수 있는 한반도 주변 해수의 최고 온도, 최고 염분, 온도와 염분의 발생빈도값을 산출하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.