• 한국식품영양학회지
• /
• 제31권5호
• /
• pp.729-736
• /
• 2018

This study was performed to facilitate development of new food materials by comparing general components, functional components and antioxidant activity of cherry, aronia, and maquiberry. Cherry revealed higher content of water (6.71%), crude protein (4.61%) and crude protein (5.33%) than aronia and maquiberry. Crude fat content of cherry fruits was the lowest at 1.46%. Content of iron per 100 g was 0.96 mg in cherry, significantly higher than other berries. Total phenolic content of cherry, aronia and maquiberry was 31.32~95.05 GAE mg/g. Total flavonoid content in water extract was 2.07 QE mg/g in cherry, compared with aronia and maquiberry. FRAP reduction power of cherry, aronia and maquiberry was $86.94{\sim}331.83TEAC\;{\mu}mol/g$. FRAP reduction power ($156.50TEAC\;{\mu}mol/g$) of cherry was higher than that of aronia ($121.72TEAC\;{\mu}mol/g$) at $95^{\circ}C$ deionized water extract. In the case of water extract, $117.00TEAC\;{\mu}mol/g$, and cherry was higher in ABTS radical scavenging ability than aronia ($86.55{\mu}mol/g$). DPPH radical scavenging activity of cherry, aronia and maquiberry was $26.34{\sim}493.53TEAC\;{\mu}mol/g$. DPPH radical scavenging activity was lowest in cherry. In conclusion, in place of foreign expensive aronia and maquiberry, the price of cherry is low and use of cherry widely distributed has increased and is used as a material of functional food.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권6호
• /
• pp.2398-2421
• /
• 2020

In third world countries like Pakistan, the production of electricity has been quickly reduced in past years due to rely on the fossil fuel. According to a survey conducted in 2017, the overall electrical energy capacity was 22,797MW, since the electrical grids have gone too old, therefore the efficiency of grids, goes down to nearly 17000MW. Significant addition of fossil fuel, hydro and nuclear is 64.2%, 29% and 5.8% respectively in the total electricity production in Pakistan. In 2018, the demand crossed 20,223MW, compared to peak generation of 15,400 to 15,700MW as by the Ministry of Water and Power. Country faces a deficit of almost 4000MW to 5000MW for the duration of 2019 hot summer term. Focus on one aspect considering Demand Side Management (DSM) cannot oversea the reduction of gap between power demand and customer supply, which eventually leads to the issue of load shedding. Hence, a scheduling scheme is proposed in this paper called RPSMDSM that is based on selection of those appliances that need to be only Turned-On, on priority during peak hours consuming minimum energy. The Home Energy Management (HEM) system is integrated between consumer and utility and bidirectional flow is presented in the scheme. During peak hours of electricity, the RPSMDSM is capable to persuade less power consumption and accomplish productivity in load management. Simulations show that RPSMDSM scheme helps in scheduling the electricity loads from peak price to off-peak price hours. As a result, minimization in electricity cost as well as (Peak-to-Average Ratio) PAR are accomplished with sensible waiting time.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권5호
• /
• pp.762-769
• /
• 2009

A canoe is one of the most popular boats in leisure on the water. Generally canoe has been built by good wooden strips. And canoe built by FRP is used for business recently. But by the users' demands for good quality and the restriction to environmental pollution the wooden canoes are required for personal and canoe building business. The modern wooden canoes were built by the strip construction method are used typically. However it is not suitable for the mass productivity requires effective resource operations and managements of men, materials, times, and price. On this paper the new construction method, called the piling-up laminated construction method, is studied to building a canoe using the piling-up with the laminated wooden plates gives more productivity than the others. First a canoe with various curved surfaces is designed from 3D design system. And the hull of canoe model is divided horizontally to generating the laminated plates that will be converting real wooden plates available from the market and will be routed by the manufacturing machine. After the simulating and analyzing of piling-up with the laminated plates, the canoe is building with less times, less men, less resources, and lower price than other method, avoid of the requirements of additional building tools. On the next paper the constructing of a real canoe using the manufactured wooden plates will be studied.

• 패션비즈니스
• /
• 제11권3호
• /
• pp.15-34
• /
• 2007

This study was designed to collect a precise information concerning to the preference and evaluations after usage of pregnant Korean woman for the maternity wear bysurvey and wear tests. Through the survey, 212 respondents were asked to answer what type of maternity wear they prefer and what requirements for maternity wear design are important. According to the results of survey, the mostly preferred maternity wear items were pants and one-piece dress. Korean customers for maternity wear usually pay more for the one-piece dress than other items and they also usually put on medium price pants and low-price blouse. Concerning to the purchase criteria, it may be said that design and movability, fit factors are the buying decision criteria of great weight for Korean pregnant women. Special function most desired was thermal insulation, followed by buffer action, electromagnetic shield and quickly water-absorbent and dry property. Preferred maternity wear design details were flat collar, slightly fitted waist and empire style, gather skirt, rubber band waist. Wear test was performed for two kinds of blouse (BL) and one-piece dress (OP), and threekinds of pants (PT), which have different design details respectively. According to the wear test for ready-to-wear maternity garments, the garment which considers well the characteristics of Korean pregnant women body shape earned much higher score no matter of brands or prices. Generally, high-priced national brands received an excellent evaluation in design aspect, but not satisfied with comfort to move.

• 화훼연구
• /
• 제18권3호
• /
• pp.171-178
• /
• 2010

수출용 접목선인장 '황월'의 기존에 사용되는 배지인 피트모스 보다 가격이 낮으며, 생육이 피트모스와 비슷한 배지를 선발하고자 7가지 종류 배지 (피트모스, 배양토 BM6, 코코피트, 하이드로크레이, 하이드로볼, 휴가토, 버미큘라이트)에 재배하여 배지의 이화학적 성분과 생육변화를 조사하였다. 배지의 이화학적 분석결과로는 코코피트가 식재 90일 후에도 이화학적 성분의 변화가 거의 없어 안정적이었으며, 하이드로볼이 보수력이 높은 것으로 조사되었다. 수출용 접목선인장 '황월'의 생육조사 결과 유기질 배지에서 대조구인 피트모스와 비슷한 생육을 보인 배지는 코코피트 였으며, 무기질 배지에서는 휴가토, 버미큘라이트, 하이드로클레이가 대체적으로 양호한 생육을 보였다. 그러나 무기질 배지는 무게가 가벼워 식물식재 후 이동 시 쓰러지는 단점이 있었다. 피트모스와 비슷한 생육조건과 낮은 가격을 가진 배지로는 유기질 배지인 코코피트와 수태를 감싸지 않고 사용할 수 있는 무기질 배지인 무게가 상대적으로 무겁고 값이 낮으며 국내 생산이 되는 하이드로볼이 수출용 선인장 재배 배지로 적합할 것으로 판단되었다.

• 농촌지도와개발
• /
• 제9권1호
• /
• pp.11-27
• /
• 2002

The objectives of this study were to categorize agriculture, to analyze perception of sustainable agriculture and to suggest the directions for improving farming practices in Korea. This study was conducted by review of literature and mail survey. The data was collected from 225 purposively sampled agricultural students by questionnaire. Major findings of the study were as follows; 1) According to the respondents, sustainable agriculture may bring positive effects on the betterment of land conservation, water management and animal protection. 2) The respondents expected that the sustainable agricultural practices may diminish the use of agricultural chemicals and increase safe agricultural products. 3) Sustainable agriculture needs more labor power, however, the number of small and middle-size farms in Korea would not be increased. 4) Even though the price of sustainable agriculture products increases, the respondents expected that rural economic condition would not be much improved because of sustainable agriculture. 5) Agricultural students responded that number of farmers in sustainable agriculture would be increased in the future.

• 디자인학연구
• /
• 제12권3호
• /
• pp.93-103
• /
• 1999

This study is investigated the formative characteristics of Rap Music and Hiphop fashion, and I try to comprehend about the fashion mind and fashion culture of teenager 1. Teenager's Hiphop Fashion is subcultures, the fashion culture of teenager reflects their unique identity. 2. The formative characters of Rap Music and Hiphop Fashion are the incompatibility ignored their body size and the popularity caused street fashion imitation, the unbalance ignored a principle of fashion design. 3. Hiphop Fashion is consist of jump-style jacket, hood -shirt, stripe T-shirt and drum pants, baggy pants, snowboard pants and so on. 4. The characters of Hiphop Fashion is the breaking of rule and the destruction. 5. They select something which they like, even though the price is high, so they is tendency to editing coordinate 6. Fashion business for teenager, it needs an ideal conversion not for 'company' but for 'individual' As this results, fashion culture of teenager came out to the surface of water, because of Hiphop Fashion.

• 한국조리학회지
• /
• 제9권4호
• /
• pp.54-68
• /
• 2003

This study aims at efficiency of kitchen management by adoption of a systematic central kitchen and conversion of conventional kitchen to convenience kitchen at ' H ' restaurant. First, integrated menu control of banquet buffet functions became more competitive with quality menu and eventually brought about guests satisfaction. Second, systematic central kitchen made possible standardization and mass production through simplified production line. Efficiency through quick service and shortened preparation time was realized, and food materials were recycled effectively at the same time. Integrated ordering lowered purchasing price and built an efficient cost control system. Third, conversion of conventional kitchen to convenience kitchen and strengthened central kitchen system facilitated agreeable work conditions and optimal work flow with butcher's and even sauce making utensils. Fourth, integrated supply system of buffet menu and sauce from western restaurants saved about 520 million won of labor costs. Last, one integrated kitchen out of two was easier in sanitation control with pleasant restaurant space. Sharing kitchen facilities and equipments also saved about 30% of maintenance fee. Power, water, and gas were also saved and eventually curtailed overall expenses.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.313-318
• /
• 2001

The cost of producing ready mixed concrete(remicon) has increased due to the rising cost of raw materials for concrete and transportation caused by the upturn of oil price. In contrast, its orders have also decreased due to the recession of the construction industry. In addition, the cost of delivery has decreased owing to the excessive competition among manufacturing companies, so manufacturing companies began mixing ground granulated blast-furnace slag or fly ash to lower the cost. However, there is no way to determine whether the strength of the concrete using the admixture is satisfied or dissatisfied with design strength at the early age. The purpose of this study is dedicated to early strength estimation of concrete mixed with an admixture, ground granulated blast-furnace slag.

• Journal of Biosystems Engineering
• /
• 제13권3호
• /
• pp.81-90
• /
• 1988

Agricultural and municipal wastes arc serious nuisance. in Korea. Disposal of these wastes by land application, incineration or burial have created serious environmental problems such as air pollution and ground water contamination. Uncomposted waste materials are also potential sources of plant and soil pathogens. As available sites for waste burial become more difficult to find and air quality standards for incineration become stricter, composting as a method for treating solid wastes will become more attractive. This article discussed the recent topics on composting to further develop a rational strategy. The future of composting is developed based on the interacting factors of the price of energy and fertilizer, public policy, economic considerations, and biotechnology.