• 한국산학기술학회논문지
• /
• 제13권2호
• /
• pp.485-491
• /
• 2012

최근 국내 섬유산업의 생산량이 증가함에 따라 섬유산업에서 에너지 소비는 계속 증가되고 있는 실정이다. 기존의 염색기는 고온 고압의 특성을 가지고 있기 때문에 염색 후 냉각을 하기 위하여 열교환기를 통한 간접냉각방식을 채택하고 있다. 이러한 간접냉각방식은 물의 소모량이 많으며 작업 시간 또한 오래 걸리는 문제점이 있고 냉각시 염액의 고착으로 인해 냉각 후 환원세정 및 수세를 수차례 하므로 에너지가 많이 소비된다. 따라서 본 논문에서는 고온 고압 액류 염색기의 열교환기에 의한 간접냉각방식을 염색기내에 냉수를 직접 공급하는 직접냉각방식으로 대체하기 위한 장치를 개발하여 기존의 염색기에 적용하여 냉각과 동시에 환원세정공정을 생략하고 수세공정을 단축시키면서 전공정을 마무리함으로써 전체 작업공정을 줄이고 에너지 소비를 절감하는 등의 생산성을 획기적으로 향상시킬 수 있는 직접냉각수세장치를 제안하며, 시제작품을 제작하고, 실제 염색기에 적용하여 기존의 간접 냉각 방식의 염색기와 성능, 자원 및 에너지 절감율을 비교하였다. 또한 시제작품을 적용한 염색기의 염색성 실험을 하였다.

• Korean Chemical Engineering Research
• /
• 제51권2호
• /
• pp.214-220
• /
• 2013

본 연구에서는 실리케이트계 황색 형광체($Sr_2SiO_4:Eu^{2+}$)의 신뢰성 향상을 위하여 대기압 유전체장벽방전 플라즈마를 이용하여 hexamethyldisiloxane (HMDSO, $C_6H_{18}OSi_2$)을 형광체 분말에 코팅하였다. 플라즈마 코팅 후의 형광체 분말특성은 주사전자현미경(scanning electron microscope), 투과전자현미경(transmission electron microscope), 형광분광광도계(fluorescence spectrophotometer) 및 접촉각측정기(contact angle analyzer)를 이용하여 조사되었다. 형광체 분말의 플라즈마 코팅 후 접촉각이 $133.0^{\circ}$(물)와 $140.5^{\circ}$(글리세롤)로 증가하여 표면이 소수성으로 변화되었음을 확인하였으며, 광발광(photoluminescence)은 최대 7.8%의 향상을 나타냄을 알 수 있었다. 플라즈마 코팅 후 형광체 표면의 주사전자현미경 및 투과전자현미경 사진을 통해 낟알형상의 표면조직이 박막 코팅 층으로 덮여 있고, 코팅 층은 31~46 nm 가량의 두께로 형성되어 있음을 확인하였다. 발광다이오드(3528 1 칩 LED)에 형광체를 실장한 후 $85^{\circ}C$와 85% 상대습도에서 1,000시간 동안 신뢰성 테스트(85-85 Test)를 수행한 결과 코팅이 되지 않은 경우와 비교하여 코팅후의 형광체가 광도 저하율에서도 개선 효과를 보이는 것으로 나타났다. 본 연구의 유전체장벽방전 플라즈마 코팅 방법은 불규칙한 입자 형태의 형광체 분말 표면을 입체적으로 코팅하여 제품의 신뢰성을 향상시킬 수 있는 방법으로 판단된다.

• 한국지반공학회논문집
• /
• 제32권7호
• /
• pp.25-34
• /
• 2016

현재 우리나라에서는 해저케이블 또는 해상구조물 기초부, 흙댐, 도로공사 등의 성토재료로 이용된 다짐풍화토에서 침식(Erosion)으로 인한 사면의 불안정성, 오래된 상 하수관이 누수되거나 파열되어 발생하는 도심지 싱크홀 등의 문제가 발생하고 있다. 이와 같이 건설재료로 많이 이용된 풍화토는 지하수 및 지표수 흐름이 발생할 때 다양한 입자 크기의 점토, 실트 및 세립의 모래들과 함께 침식되거나 세굴 되어 소규모 공동을 형성하며, 일단 침식이나 세굴이 발생되기 시작하면 점차 침식율이 증가하게 되어 급격한 파괴에 도달한다. 본 연구에서는 회전식 수리저항성능 실험기(RCT)를 이용하여 다양한 상대밀도와 선행압밀압력으로 압밀된 다짐화강풍화토의 수리저항성능을 평가하였다. 또한 회전으로 인하여 일정하게 세굴되지 않은 시료의 단면해석을 위해 영상처리기법을 도입하였다. 연구결과 침식으로 인하여 시료의 형상이 일정하지 않는 경우, 계산된 임계전단응력에 큰 오차가 발생되는 것으로 확인되었으며 제안된 영상처리기법으로 보정된 반지름을 이용할 경우보다 정확한 한계 및 임계전단응력 계산이 가능한 것으로 나타났다. 또한 상대밀도와 선행압밀압력이 증가할수록 한계전단응력은 증가하나 임계전단응력은 선행압밀하중 증가에 의한 효과는 크지 않은 것으로 나타났으며, 선행압밀압력에 의한 응력이력보다는 초기 상대밀도의 효과가 더 큰 것으로 나타났다.

• 농업과학연구
• /
• 제41권4호
• /
• pp.473-480
• /
• 2014

Upon setting up a dedicated plastic greenhouse for tomato cultivation developed by the Rural Development Administration on the Gyehwa reclaimed land, this study was aimed at analyzing the problems can be occurred in the installation of plastic greenhouse on reclaimed lands as well as finding out solutions for improvement. A relatively cheaper wooden pile was used in the installation in order to supplement the soft ground conditions. Based on the results of ground investigation of the installation site, both the allowable bearing capacity and pulling resistance of the wooden pile with a diameter of 150 mm and a length of 10 m were computed and came out to be 30.645 kN. It was determined that the values were enough to withstand the maximum compressive force (17.206 kN) and the pullout force (20.435 kN) that are generally applied to the greenhouse footing. There are three problems aroused in the process of greenhouse installation, and the corresponding countermeasures are as follow. First, due to the slightly bent shape of the wooden pile, there were phenomenon such as deviation, torsion, and fracture when driving the pile. This could be prevented by the use of the backhoe (0.2) rotating tongs, which are holding the pile, to drive the pile while pushing to the direction of the driving and fixing it until 5 m below ground and applying a soft vibrating pressure until the first 2 m. Second, there exists a concrete independent footing between the column of the greenhouse and the wooden pile driven to the underground water level. Since it is difficult to accurately drive the pile on this independent footing, the problem of footing baseplate used to fix the column being off the independent footing was occurred. In order to handle with this matter, the diameter of the independent footing was changed from 200 mm to 300 mm. Last, after films were covered in the condition that the reinforcing frame and bracing are not installed, there was a phenomenon of columns being pushed away by the strong wind to the maximum of $11m{\cdot}s^{-1}$. It is encouraged to avoid constructions in winter, and the film covering jobs always to be done after the frame construction is completely over. The height of the independent footing was measured for 9 months after the completion of the greenhouse installation, and it was found to be within the margin of error meaning that there was no subsidence. The extent to the framework distortion and the value of inclinometers as well showed not much alteration. In other words, the wooden pile was designed to have a sufficient bearing capacity.

• 대한화학회지
• /
• 제46권3호
• /
• pp.265-278
• /
• 2002

본 연구에서는 화학평형과 평형이동에 관한 대학생들과 교사들의 개념형성 정도를 조사하기 위하여 개념검사 문항을 이용하여 서울지역 대학교 1학년 학생53명, 3학년 학생 28명, 4학년 학생 26명과 고등학교 교사10명에게 지필검사를 실시하였다. 개념검사 문항의 ?뼁育?기체의 부분압력과 농도 계산, 기체상 반응의 평형상수 계산과 비활성 기체 첨가에 의한 평형이동, 약산 수용액에서의 농도 계산과 물 또는 공통이온 첨가에 의한 평형이동에 관한 것으로 르샤틀리에 원리의 적용이 어려운 상황에서 반응지수의 변화를 이용하여 평형이동 방향을 예측할 수 있는가에 초점을 두었다. 응답 내용을 분석한 결과, 교사와 물리화학을 배운 3학년 학생들의 정답률이 일반화학을 배운 1학년 학생들이나 물리화학을 배운지 1년 정도 지난 4학년 학생들보다 유의미하게 높은 것으로 나타났다. 그리고 선수 개념인 부분압력과 농도 계산에 대한 정답률은 높았으나 이와 동일한 조건에서 화학평형이동 방향을 예측하는 문항의 정답률은 낮게 나타나 계산 능력보다는 반응지수를 이용한 평형이동의 예측에 대한 개념 형성이 부족한 것으로 드러났다.

• Journal of Korean Neurosurgical Society
• /
• 제47권5호
• /
• pp.370-376
• /
• 2010

Objective : Although unilateral transforaminal lumbar interbody fusion (TLIF) is widely used because of its benefits, it does have some technical limitations. Removal of disk material and endplate cartilage is difficult, but essential, for proper fusion in unilateral surgery, leading to debate regarding the surgery's limitations in removing the disk material on the contralateral side. Therefore, authors have conducted a randomized, comparative cadaver study in order to evaluate the efficiency of the surgery when using conventional instruments in the preparation of the disk space and when using the recently developed high-pressure water jet system, SpineJet$^{TM}$ XL. Methods : Two spine surgeons performed diskectomies and disk preparations for TLIF in 20 lumbar disks. All cadaver/surgeon/level allocations for preparation using the SpineJet$^{TM}$ XL (HydroCision Inc., Boston, MA, USA) or conventional tools were randomized. All assessments were performed by an independent spine surgeon who was unaware of the randomizations. The authors measured the areas (cm2) and calculated the proportion (%) of the disk surfaces. The duration of the disk preparation and number of instrument insertions and withdrawals required to complete the disk preparation were recorded for all procedures. Results : The proportion of the area of removed disk tissue versus that of potentially removable disk tissue, the proportion of the area of removed endplate cartilage, and the area of removed disk tissue in the contralateral posterior portion showed 74.5 ${\pm}$ 17.2%, 18.5 ${\pm}$ 12.03%, and 67.55 ${\pm}$ 16.10%, respectively, when the SpineJet$^{TM}$ XL was used, and 52.6 ${\pm}$ 16.9%, 22.8 ${\pm}$ 17.84%, and 51.64 ${\pm}$ 19.63%, respectively, when conventional instrumentations were used. The results also showed that when the SpineJet$^{TM}$ XL was used, the proportion of the area of removed disk tissue versus that of potentially removable disk tissue and the area of removed disk tissue in the contralateral posterior portion were statistically significantly high (p < 0.001, p < 0.05, respectively). Also, compared to conventional instrumentations, the duration required to complete disk space preparation was shorter, and the frequency of instrument use and the numbers of insertions/withdrawals were lower when the SpineJet$^{TM}$ XL was used. Conclusion : The present study demonstrates that hydrosurgery using the SpineJet$^{TM}$ XL unit allows for the preparation of a greater portion of disk space and that it is less traumatic and allows for more precise endplate preparation without damage to the bony endplate. Furthermore, the SpineJet$^{TM}$ XL appears to provide tangible benefits in terms of disk space preparation for graft placement, particularly when using the unilateral TLIF approach.

• 조형예술학연구
• /
• 제6권
• /
• pp.140-202
• /
• 2004

Body means 1)the whole structure and substance of a man, animal, or plant 2) the trunk or torso of a man or animal 3) part of garment that covers the trunk 4) the fresh or material substance, as opposed to the spirit. Human body could be distinguished as fresh and spirit. Body has the meaning of physicality. Physical means the bodily and constitution, but in the meaning of constitution there is the content of spirituality. Physicality means the appearing or arising of trace or image or nuance of body. The paintings which are using bodies are 1) directly draw bodies 2) twisting or transformation or nuance of the body and highly upgrade the physical emotion or fantastic bodily nuance 3) directly rubbing artist's body on the surface of painting with pigments to elect tactile specification. These physical art have appeared broadly by various artists, mainly with the social aspects of sex, drug, psycho sexual issues. In case of Joel peter Whitkin, the reason of strong physicality in the art is from the mind of the rejection and resistance of real world which is targeting top, perfect and beauty. Further explanation, being the world which is separated top and under, men and women, beauty and ugly; further in the situation, the hierarchy, terror and pressure began and many difficult problems has derived. The contents of attacking feminists's art works are very obscene to reveal female and male's phallus strongly. Sometime, it is strongly related in the political issues. The physical paintings have strong meanings in the action by hands and feet. It supports that it could reveal the humanity with smell, breath, and traces of bodies. In the bodies, the origin of life begins which gives human life by blood lines and water. Sometime, the physical paintings are made by the blood and urine to stick the physicality for special nuance. The physical paintings are made by the image of penis and clitoris which are related in the image of urinating, ejaculation and sometime is symbolized as pens and candles to drop liquid. The selected painters who are related in physical painting are Jackson Pollock, Andrea Serano, Eve Klein, Francis Bacon, Francesco Clemente, Lichard Long, Jakes & Dinos Chapman, Anselm Kiefer, Kiki Smith and Park, Ki Woong. Francis Bacon's style is destructive in representing human shapes which give us special message about the unbearable activity of men politician, high brain, wealthy and religious people. Francesco Clemente's method is to use throat, ear hole, mouse, clitoris, belly nostrils and every holes of body to transmute human physical body. Lichard Long uses directly his body in drawing the surface of painting by using liquid of mud Jakes & Dinos Chapman destroys or transforms the bodies of human. It sometime appears wrong location of the bodies that the penis and vulva is in between human faces or nose of women, Anselm Kiefer uses human hair for representing the human decaying martyrs, and indirectly using straw, he gives special ritual action to repent the Nazi's fault. From 2002 to 2003, Park KI Woong used women womb images to intermingle the smoke shape of <9.11 terror, 2001> in New York to reveal the painful situation of the time(*).

• 대한약리학회지
• /
• 제17권1호
• /
• pp.9-15
• /
• 1981

부자성분중 강심효과를 나타내는 부자부타놀분획의 작용기전을 심근수축기전이 있어서 중심적인 역활을 하는 칼슘이온과의 상호관계에서 검토하였으며 아울러 동물생체내 혈동력학에 대한 영향을 관찰하였다. 부자부타놀분획 적출 고양이 유두근표본의 수축력증가작용에 있어서 심근외칼슘과 상승적이었으며 부자부타놀분획 $10^{-4}g/ml$는 칼슘 0.06mM과 동등한 심근수측증강 효과를 나타내었다. 심근세포막의 칼슘통로 억제약물인 verapamil 존재하에서 저하된 유두근 수축력은 부자부타놀분획에 의하여 용량의존적으로 회복되었으며, 이로부터 부자부타놀분획의 강심작용기전의 일부는 심근세포막의 완만내향성 칼슘통로를 통한 칼슘유입을 측진하는 것과 관계가 있을 것으로 추측하였다. 정상가토의 혈동력학에 있어서 부자부타놀분획은 디지탈리스배당체와는 달리 용량의존적으로 전신동맥압을 저하시키고, 경동맥혈류량을 증가시켰으며, 심박동수에는 크게 의미있는 변화를 보이지 않았다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제8권1호
• /
• pp.17-36
• /
• 1984

Since 1973, the competition on the development of fuel saving type internal combustion engines has become severe by the two times oil shock, and new type engines are reported every several months. Whenever these new type engines are developed, new designs are required and they will be offered in the market after performing the endurance test for a long time. But the engine market is faced with a heavy burden of finance, as the developing of a new engine requires tremendous expenses. For this reason, the computer simulation method has been lately developed to cope with it. The computer simulation method can be available to perform the reasonable research works by the theoretical analysis before carrying out practical experiments. With these processes, the developing expenses are cut down and the period of development is curtailed. The object of this study is the development of simulation computer program for the small naturally aspirated four-stroke diesel engine which is intended to product by the original design of our country. The process of simulation is firstly investigated for the ideal engine cycle, and secondly for the real engine cycle. In the ideal engine cycle, each step of the cycle is simulated by the energy balance according to the first law of thermodynamics, and then the engine performance is calculated. In the real cycle imulation program, the injection rate, the preparation rate and the combustion rate of fuel and the heat transfer through the wall of combustion chamber are considered. In this case, the injection rate is supposed as constant through the crank angle interval of injection and the combustion rate is calculated by the Whitehouse-Way equation and the heat transfer is calculated by the Annand's equation. The simulated values are compared with measured values of the YANMAR NS90(C) engine and Mitsubishi 4D30 engine, and the following conclusions are drawn. 1. The heat loss by the exhaust gas is well agree with each other in the lower load, but the measured value is greater than the calculated value in the higher load. The maximum error rate is about 15% in the full load. 2. The calculated quantity of heat transfer to the cooling water is greater than the measured value. The maximum error rate is about 11.8%. 3. The mean effective pressure, the fuel consumption, the power and the torque are well agree with each other. The maximum error is occurred in the fuel consumption, and its error rate is about 7%. From the above remarks, it may be concluded that the prediction of the engine performance is possibly by using the developed program, although the program needs to reform by adding the simulation of intake and exhaust process and assumping more reliable mechanical efficiency, volumetric efficiency, preparation rate and combustion rate.

• 대한치과보철학회지
• /
• 제17권1호
• /
• pp.23-34
• /
• 1979

In this study, the adhesive strength of three commercial polycarboxylate cements to ten types of dental casting alloys, such as gold, palladium, silver, indium, copper, nickel, chromium, and human enamel and dentine were measured and compared with that of a conventional zinc phosphate cement. The $8.0mm{\times}3.0mm$ cylindrical alloy specimens were made by casting. The enamel specimens were prepared from the labial surface of human upper incisor, and the dentine specimens were prepared from the occulusal surface of the human molar respectively. Sound extracted human teeth, which had been kept in a fresh condition since, extraction, were mounted in a wax box with a cold-curing acrylic resin to expose the flattened area. The mounted teeth were then placed in a Specimen Cutter (Technicut) and were cut down under a water spray, and then the flat area on the all specimens were ground by hand with 400 and 600 grit wet silicone carbide paper. Two such specimens were then cemented together face-to-face with freshly mixed cement, and moderate finger pressure was applied to squeeze the cement to a thin and uniform film. All cemented specimens were then kept in a thermostatic humidor cabinet regulated at $23{\pm}2^{\circ}C.$ and more than 95 per cent relative humidity and tested after 24 hours and 1 week. Link chain was attached to each alloy specimen to reduce the rigidity of the jig assembly, and then all the specimens were mounted in the grips of the Instron Universal Testing Machine, and a tensile load was delivered to the adhering surface at a cross head speed of 0.20 mm/min. The loads to which the specimens were subjected were recorded on a chart moving at 0.50 mm/min. The adhesive strength was determined by measuring the load when the specimen separated from the cement block and by dividing the load by the area. The test was performed in a room at $23{\pm}2^{\circ}C.$ and $50{\pm}10$ per cent relative humidity. A minimum of five specimens were tested each material and those which deviated more than 15 per cent from the mean were discarded and new specimens prepared. From the experiments, the following results were obtained. 1) It was found that the adhesive strength of the polycarboxylate cement to all alloys tested was considerably greater than that of the zinc phosphate cement. 2) The adhesive strength of the polycarboxylate cements was superior to the non precious alloys, such as the copper, indium, nickel and chromium alloys, but it was inferior to the precious gold, silver and palladium alloys. 3) Surface treatment of the alloy was found to be an important factor in achieving adhesion. It appears that a polycarboxylate cement will adhere better to a smooth surface than to a rough one. This contrasts with zinc phosphate cements, where a rough helps mechanical interlocking. 4) The adhesion of the polycarboxylate cement with enamel was found superior to its adhesion with dentine.