• 한국세라믹학회지
• /
• 제42권10호
• /
• pp.691-697
• /
• 2005

Porous ceramics which have closes pore were fabricated by heat treatment at 100$\∼$ 600$^{\circ}C$ for 30 min using dried water glasses with 25, 35, and 45 wt$\%$ water contents. Size and distribution of the closed pore were varied depending on the water contents and heat treatment temperature. The expansion procedure could be distinguished by two stages. The frist stage occurred around loo$\%$ due to the evaporation of water and the second stage occurred at 200$\∼$400$^{\circ}C$ due to the decomposition of Si-OH compounds. The specimen was not expanded successfully because of the softening of the dried water glass at 500$\∼$600$^{\circ}C$.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1424-1429
• /
• 2004

Distillation is one of many processes that can be used for the purification of water. It requires an energy input such as heat and solar radiation is a possible source of energy. In this process, water is evaporated, thus separating water vapor from the solute. The vapor is then condensed to pure water. The temperature of the water, the cavity of the enclosure and the surface of the glass was measured everyday. Fifteen points were chosen for the temperature measure using a thermocouple. The inner wall and the bottom of each still was painted black for good absorption of heat. The enforced glass was used for the cover for the entering of solar energy. The size of all of the water baths was the same, but the glass of the rectangular form had a tilted angle. In the case of fine or general weather, the volume of condensed water produced by $45^{\circ}$ and $60^{\circ}$ is very irregular compared to that of $15^{\circ}$ and $30^{\circ}$, In case of a rainy day, the occurrence of the volume of condensed water was similar to that of $15^{\circ}$ and $30^{\circ}$, but the volume of condensed water produced by $30^{\circ}$ was the highest.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.139-140
• /
• 2012

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.558-560
• /
• 2004

We report the effect of wet ball milling conditions on the transparency of glass frit. Generally, the particle size of glass frit decreased as the milling time increased. And the transparency of glass frit changed with the particle size variation. The transparency of glass frit A increased as the milling time increased. But, the transparency of glass frit B, containing high $B_2O_3$ decreased as the particle size decreased. It seems to be the result of chemical reaction with water and glass frit.

• 한국세라믹학회지
• /
• 제33권8호
• /
• pp.855-862
• /
• 1996

The nucleation and the crystal growth rates of Ge-Se-Te chalcogenide glass by two step heat-treatment and its effect on the mechanical optical properties and water-resistance were determined. The maximum nuclea-tion and crystal growth rate were 2.1$\times$103/mm3 .min at 28$0^{\circ}C$ and 0.4${\mu}{\textrm}{m}$/min at 33$0^{\circ}C$ respectively. When the crystal volume fraction with crystal size $1.5mutextrm{m}$ was about 4% the (hardness and fracture toughness were about 117kg/mm2 and 6.0 MPa.mm1/2)respectively. The weight loss of crystallized glass in water was lower than parent glass($25^{\circ}C$ for 32 hrs : 0.03% 8$0^{\circ}C$ for 16 hrs : 0.1%) as 0.01% at $25^{\circ}C$, 0.03% at 8$0^{\circ}C$ for 16 hrs : 0.1%) at $25^{\circ}C$ 0.03% at 8$0^{\circ}C$ respectively. The IR-transmittance decreased with increasing crystal size and crystal volume fraction. The IR-transmittance of crystallized glass with the crystal size of $1.5mutextrm{m}$ (crystal volume fraction : 4%) presented 56% which was about 4% lower than that of parent glass.

• The Korean Journal of Ceramics
• /
• 제6권1호
• /
• pp.37-42
• /
• 2000

To reduce shrinkage and the possibility of fracture during ambient pressure drying, it is of great importance to increase the strength and stiffness of the wet gels. In this paper is presented the strengthening and stiffening of wet silica gels prepared from sodium silicate (water glass) as well as properties of the corresponding xerogels. By washing gels containing different initial silica contents in water solutions at elevated pH, a maximum in shear modulus of ~4 MPa was obtained. The maximum stiffness enabled xerogels with bulk density of 0.28g/$\textrm{cm}^3$ to be made regardless of silica content and washing conditions. However, by aging the wet gels in a solution providing fresh monomers to the gel network, a shear modulus of 20 MPa was obtained after 27h. By this method monolithic xerogels with a density down to ~0.2g/$\textrm{cm}^3$ was prepared. The results are compared to alkoxide based gels.

• 한국세라믹학회지
• /
• 제45권10호
• /
• pp.631-637
• /
• 2008

Self-standing mesoporous bioactive glass/poly($\varepsilon$-caprolactone) composite thin films with good molding capability, bioactivity, and biocompatibility in vitro, which may find potential applications in tissue engineering and drug storage, were prepared using a combination of the sol-gel, polymer templating, and water casting method. The thickness of self-standing films was affected by the difference of dielectric constant between distilled water and organic solvent.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제8권2호
• /
• pp.1-8
• /
• 2003

Chlorofluorocarbons(CFCs) 조사를 위한 지하수 시료 채취 방법 중 cold-welded copper tube method(구리관법)과 flame-sealed borosilicate glass ampule method(유리앰퓰법)의 두 방법을 비교하고 검토하였다. 구리관법에 의해 채취된 시료의 CFCs 농도는 중복시료간에 재현성이 불량한 반면, 유리앰퓰법은 상대표준오차가 5％ 이내로 좋은 재현성을 보여주었다. 이것은 구리관법을 적용할 때, 관정의 출수구와 구리관의 연결의 밀봉성이 좋지 않았기 때문인 것으로 추정된다. 또한 구리관법에 의한 CFCs 농도는 전체적으로 유리앰퓰에 의한 값보다 높았으며 이러한 특징은 CFC-11이 CFC-12보다 더 두드러졌다. 구리관법의 경우에 플라스틱 관이나 관정에 설치된 출수구에 포함된 고무 패킹 등이 시료를 CFCs로 오염시켰을 것으로 평가된다. 유리앰퓰법을 적용했을 때에는 이러한 가능성을 제거하기 위해 stainless steel과 nylon 재질만을 이용하고, 시료채취장비를 관정의 주배수관에 직접 연결하였다. 인위적인 공급원에 의한 CFCs가 없을 것으로 예상되는 시료에서 유리앰퓰법에 의해 매우 낮은 수준의 CFCs농도가 측정됨으로써 이 시료채취과정의 유효성이 검증되었다.

• Computers and Concrete
• /
• 제24권2호
• /
• pp.151-158
• /
• 2019

The sustainable development principle of replacing natural resources with renewable material is an important research topic. In this study, waste LCD (liquid crystal display) glass powder was used to replace cement (0%, 10%, 20% and 30%) through a volumetric method using three water-binder ratios (0.47, 0.59, and 0.71) to make cement mortar. The compressive strength was tested at the ages of 7, 28, 56 and 91 days. The test results show that the compressive strength increases with age but decreases as the water-binder ratio increases. The compressive strength slightly decreases with an increase in the replacement of LCD glass powder at a curing age of 7 days. However, at a curing age of 91 days, the compressive strength is slightly greater than that for the control group (glass powder is 0%). When the water-binder ratios are 0.47, 0.59 and 0.71, the compressive strength of the various replacements increases by 1.38-1.61 times, 1.56-1.80 times and 1.45-2.20 times, respectively, during the aging process from day 7 to day 91. Furthermore, a prediction model of the compressive strength of a cement mortar with waste LCD glass powder was deduced in this study. According to the comparison between the prediction analysis values and test results, the MAPE (mean absolute percentage error) values of the compressive strength are between 2.79% and 5.29%, and less than 10%. Thus, the analytical model established in this study has a good forecasting accuracy. Therefore, the proposed model can be used as a reliable tool for assessing the design strength of cement mortar from early age test results.

• 한국결정성장학회지
• /
• 제22권3호
• /
• pp.152-157
• /
• 2012

본 연구는 알칼리 활성화제로 NaOH와 물유리를 사용하고 리젝트애쉬와 고로슬래그를 혼합하여 지오폴리머를 제조하였다. 리젝트애쉬와 고로슬래그의 치환율과 물유리와 NaOH의 농도에 따른 압축강도를 측정하였다. 압축강도 측정결과로는 알칼리 활성화제로 NaOH 1 wt%, 물유리 3 wt%와 전량 고로슬래그를 사용한 경우 재령 28일차 강도가 38.91 MPa의 성능을 나타내었다. 압축강도 증진의 중요한 요인은 알칼리 활성화제의 비율과 리젝트애쉬와 고로슬래그의 치환율에 의한 것이었다.