• Membrane and Water Treatment
• /
• 제7권5호
• /
• pp.433-449
• /
• 2016

The successful application of cleaning protocols is vital for optimized filtration processes. A series of experiments with an ultrafiltration ceramic tubular membrane were carried out for the foulants dextran and carboxymethyl cellulose. Firstly, the impact on fouling of concentration changes was investigated with the increase in resistance being used as the key parameter. In the second phase, removal of reversible fouling was also investigated by employing intermittent rinsing consisting of a cold water rinse followed by a hot one. A comparative analysis for both foulants is reported. Across a range of concentrations and for both foulants, the reduction in resistance due to rinsing was found to depend upon concentration (C); it changed as $C^n$ where n was found to be 0.3. A plausible semi-theoretical explanation is given. Thirdly, for both foulants, the application of a combination of strong alkaline solutions with oxidizing agent (mainly sodium hypochlorite) followed by acid was found to be appropriate for cleaning of the ceramic membrane. The effect of increased temperature for cleaning agents followed by a warm water rinse contributed positively to the cleaning capability.

• Nuclear Engineering and Technology
• /
• 제52권3호
• /
• pp.581-588
• /
• 2020

The membrane fouling is an important problem for FO applied to the radioactive wastewater treatment. The FO fouling characteristics for simulated radioactive wastewater treatment was investigated. On-line cleaning by deionized (DI) water and external cleaning by ultrasound and HCl were applied for the fouled membrane. The effectiveness and foulant removing amount by each-step cleaning were evaluated. The membrane fouling was divided into three stages. Co(II), Sr(II), Cs(I), Na(I) were all found deposited on both active and support layers of the membrane surface, resulting in membrane surface became rougher and more hydrophobic, which increased membrane resistance. On-line cleaning by DI water recovered the water flux to 69%. HCl removed more foulants than ultrasound.

• 한국정밀공학회지
• /
• 제30권9호
• /
• pp.977-982
• /
• 2013

Blades of wind energy plants are exposed to external shocks or internal cracks during operation. Furthermore, the blade surfaces can be contaminated by substances such as dust, blood of birds, salt or insects which can decrease the electricity generation efficiency significantly. For this reason, many blade cleaning companies started to appear and a variety of methods for cleaning were suggested. Despite these diverse methods, there has been no study to investigate how effectively to clean the substances in quantitative manner. In this paper, the cleaning efficiency of two rotor blade cleaning methods, brush and water-jet, is examined through experiments by changing operating parameters. Then, the optimal operating conditions for both methods are derived.

• 청정기술
• /
• 제10권2호
• /
• pp.61-72
• /
• 2004

본 연구에서는 물성, 세정성, 헹굼액의 유수분리성을 고려하여 유기용매의 종류 및 함량, 계면활성제의 종류 및 함량, 부조계면활성제/계면활성제 (cosurfactant/surfactant, A/S) 비율 등의 변수로 하여 수계/준수계 세정제를 개발하였다. 개발된 세정제들은 대부분 평균 액적크기가 10 ~ 20 nm의 미세 나노입자를 형성 하였으며, 30.2~32.5 dyne/cm의 낮은 표면장력과 낮은 점도 값을 보여 주었다. 플럭스에 대한 용해력은 계면활성제의 소수성이 증가할수록 높게 나타났으며 terpene을 함유한 세정제들이 hydrocarbon 함유 세정제와 대응 시판세정제에 비해 우수한 용해력을 보여 terpene계 세정제가 대체세정제로의 적합성을 보여주었다. 또한, 개발된 세정제들을 함유한 헹굼액은 시판세정제에 비하여 우수한 유수분리성을 보여 헹굼액의 재활용이 가능하여 경제적인 부담과 수질오염을 줄일 수 있음을 보여주었다. 그리고 이렇게 개발된 세정제를 L 전자 회사의 전자부품 생산라인 SMT(surface mount technology) 세정공정에 적용시켜 보았다. 그 결과 solder cream 제거에 있어서 에탄올, 이소프로필알콜(IPA), glycol ether과 같은 물질이 함유된 기존의 세정제에 비하여 세정성능이 2 배이상 향상되었고 생산현장에서 악취와 VOC의 문제를 해결시킬 수 있었다.

• Korean Membrane Journal
• /
• 제2권1호
• /
• pp.60-63
• /
• 2000

The effect of Candida rugosa and steapsin lipase cleaning was investigated for ultrafiltration polyethersulphone membrane (30,000 dalton MWCO) fouled with the semi-synthetic type cutting oil. The experimental by the water circulator. The enzyme cleaning effect was measured with respect to temperature, cleaning time and enzyme concentration. The optimum cleaning condition for the system was 25$^{\circ}C$ and 2 hour cleaning with 1,000 unites/mL steapsin solution. The pure water flux improvement by the steapsin solution cleaning was about 17% at the optimum cleaning condition.

• Membrane and Water Treatment
• /
• 제7권1호
• /
• pp.1-10
• /
• 2016

Ultrafiltration is known to be one of the most commonly applied techniques in water treatment. Membrane fouling is the main limiting factor in terms of process efficiency and restricting it to the manageable degree is crucial. Natural organic matter is often found to be a major foulant in surface waters. Among many known fouling prevention techniques, the membrane chemical cleaning is widely employed. This study focuses on evaluating the cleaning efficiency of polymeric and ceramic membranes with the use of various chemicals. The influence of cleaning agent type and its concentration, membrane material and its MWCO, and cleaning process duration on the recovery of membrane flux was analyzed. Results have shown that, regardless of membrane type and MWCO, the most effective cleaning agent was NaOH.

• 청정기술
• /
• 제16권3호
• /
• pp.162-171
• /
• 2010

본 연구에서는 유기산, 무기산, 여러 첨가제들을 이용하여 옥내급수관의 스케일 제거에 적합한 환경친화적인 세정제를 개발하고자 연구를 수행하였다. 여러 유기산 중에서 oxalic acid, citric acid, malic acid 등의 경우 산화철 제거에 비교적 좋은 효율을 보였다. 이들 유기산들을 주축으로 하여 보조제를 첨가하여 옥내급수관 스케일의 주성분인 산화철 제거 평가실험을 하였다. 여러 첨가제 중에 비이온 계면활성제가 산화철 제거력 향상에 매우 뛰어남을 확인할 수 있었다. 그리고 산화철에 대해 높은 용해력을 보인 두 종류의 배합세정제 $F_1$과 $F_2$를 제조하였는데 배합세정제 $F_1$의 경우 유기산과 첨가제로만 이루어져 있어 기존의 화학세척제에 비하여 안전하고 환경친화적이지만 비교적 산화철 용해력이 조금 떨어졌고, $F_2$의 경우는 $F_1$에 무기산을 소량 첨가함으로 산화철 용해력을 보완해 줌으로써 보다 높은 산화철 세정력을 필요로 할 때 사용하는 것이 좋을 것으로 판단된다. 따라서 옥내급수관 세정 시 스케일의 정도에 따라 배합후보 세정제를 선택하는 것이 바람직하다고 판단된다.

• 상하수도학회지
• /
• 제26권6호
• /
• pp.851-860
• /
• 2012

In this study, to evaluate the abatement of runoff pollution loads by the road sweeping(cleaning), various investigations are implemented at the sample area of the highway. As the results of evaluating the removal efficiency of pollutants along road cleaning, TSS showed about 78 % of the removal efficiency and COD showed 49 % of removal efficiency through the operation of cleaning vehicle of vacuum suction method. In case of TN and TP, they showed the relatively-lower removal efficiency by 30~35 %. TSS removal efficiency along the number of cleaning appeared about 60 % in case of one time of cleaning and the additional removal effect did not appear though the number of cleaning increased to two times. With running speed of cleaning vehicle, TSS removal ratio is lessened from 60 % to 20 % when cleaning vehicle speed up to 20 km/hr from 6 km/hr. It seems that the reasons why the removal efficiencies are inversely proportional to its speed are related to the lower vacuum efficiencies and the disturbed particles on the road. In the pollutant build-up analysis, it is showed that it takes more time to the critical pollutant build-up in the shoulder than the center of the road. It is also showed that the proper cleaning cycle is recommended as 4~6 dry weather days without rainfall events.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.252-254
• /
• 2005

Completer coverage path planning requires the robot path to cover every part of the workspace, which is an essential issue in cleaning robots and many other robotic applications such as vacuum robots and painter robots. In this paper, a novel Water Flowing Algorithm (WFA) is proposed for cleaning robots to complete coverage path planning in unknown environment without obstacles. The robot covers the whole workspace just like that water fills up a container. First the robot goes to the lowest point in the workspace just like water flows to the bottom of the container. At last the robot will come to highest point in the workspace just like water overflows from the container and simultaneously the robot has covered the whole workspace. The computer simulation results show that the proposed algorithm enable the robot to plan complete coverage paths.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.338-341
• /
• 2011

Water usage for cleaning the toilet bowl accounts for 27% of the total water usage. Water-saving valve that can select the amount of water for cleaning toilet bowl can be reduced expenditure. After installing water-saving valve, analysed the economic effects. Water-saving valves compared with flush valves, and researched the amount of water usage. Then analyzed fort he economic effects. Water-saving valve was used 5.6 ${\ell}/time$ for cleaning toilet bowl. In contrast, flush valve was consumed 8.4 ${\ell}/time$. Water-saving valve's water-saving rate was 33.3%. The initial payback period for Water-saving valve was 459.5 days. By a small investment in water saving valve, the economic benefits can be obtained.