• Structural Monitoring and Maintenance
• /
• v.9 no.1
• /
• pp.1-27
• /
• 2022

Extensive laboratory tests were conducted to investigate the effect of load amplitude, geogrid position, and number of geogrid layers, thickness of ballast layer and clay stiffness on behavior of reinforced ballast layer and induced strains in geogrid. A half full-scale railway was constructed for carrying out the tests, the model consists of two rails 800 mm in length with three wooden sleepers (900 mm × 10 mm × 10 mm). The ballast was overlying 500 mm thickness clay in two states, soft and stiff state. Laboratory tests were conducted to investigate the response of the ballast and the clay layers where the ballast was reinforced by a geogrid. Settlement in ballast and clay, soil pressure and pore water pressure induced in the clay were measured in reinforced and unreinforced ballast cases. It was concluded that the effect of frequency on the settlement ratio is almost constant after 500 cycles. This is due to that the total settlement after 500 cycles, almost reached its peak value, which means that the ballast particles become very close to each other, so the frequency is less effective for high contact particles forces. The average maximum vertical stress and pore water pressure increased with frequency.

• Ocean and Polar Research
• /
• v.33 no.2
• /
• pp.113-125
• /
• 2011

In order to assess the survival success of microphytoplankton species in ship ballast water, we examined microphytoplankton diversity from international commercial ships berthed at Ulsan and Pyeongtaek Ports, Korea, and also subjected them to laboratory studies. The ages of ballast water in each ship ranged from 1 to 365 days. Vessels originated from coastal China (Weihai, Lianyunsang and Shanghai), Chile, and from the Yellow and Pacific Oceans. The numbers of species and phytoplankton standing crops in uploaded ballast water were significantly related to the age of ballast water. The most diverse taxonomic group was diatoms. In the laboratory study, the value of in vivo fluorescence in M/V Spring Lyra gradually increased with increasing nutrients such as nitrate and phosphate. Phytoplankton in new (9 days), medium (31 days) and old (365 days) ballast water successfully survived under typical nutrient condition of port water and F/2 medium at $15^{\circ}C$ and $20^{\circ}C$, whereas phytoplankton in ballast water treatment did not survive, regardless of optimal temperature. Colonization process was dominated by diatoms; Skeletonema coastatum for M/V Spring Lyra, Thalassiosira pseudonana and Thalassiosira for M/V Han Yang, Thalassiosira pacifica and Odontella aurita for M/V Modern Express, and Chaetoceros pseudocurvisetus and Pseudo-nitzschia seriata for M/V Asian Legend. The successful establishment of non-native species was also related to nutrient richness. Our laboratory design can be applied as a practical tool to assess the survivability of invasive microphytoplankton introduced into local waters of Ulsan and Pyeongtaek.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.4
• /
• pp.284-288
• /
• 2009

The International Convention for the Control and Management of Ships Ballast Water & Sediments was adopted by consensus at a diplomatic conference of IMO at 2004. To prepare the Ballast Water Management Convention, fundamental technologies such as treatment system, type approval, risk assessment and various technical informations for formulation of the regulation for national strategy shall be developed. The information item of voyage and discharge of ship's ballast water are gathered by visiting vessel and agent at port. Using the 97 results by ships type characteristic analysis on the relation between loading/unloading and discharge/uptake of ballast water, the amounts of discharge/uptake of ballast water at each port and all of country in Korea are predicted. Hence, It is apparent that the uptake of ballast water is predicted to about 70 million ton in total of Busan, Incheon, Kwangyang and Ulsan ports at 2006 which is over 3 times than discharges.

• Journal of Navigation and Port Research
• /
• v.41 no.3
• /
• pp.79-86
• /
• 2017

Ballast water filled into and discharged from the ballast tank of a ship has a negative impact on local marine environment due to various aquatic organisms contained therein. The IMO developed and adopted "The International Convention for the Control and Management of Ships Ballast Water and Sediments, 2004" with the purpose of protecting the marine environment from transfer of harmful aquatic organisms in ballast water carried by ships. The IMO BWM Convention was approved in September 2016 and ships must be equipped with ballast water management system after September 2017. Ships' ballast water treatment methods are divided into using active substances as electrolytic type, ozone type, chemical dosing type and using physical treatment type as filter type, ultraviolet type. It is also used with a combination of two methods. Electrolysis is superior in terms of cost and efficiency. In this study, basic principles, components, and land base test contents of electrolysis ballast water treatment system, a direct electrolyzed ballast water treatment system, were examined. Land base test was conducted with 300m3/h capacity device at the KIOST Geoje plant where the government test facility was installed. This test validated that the system meets IMO standards.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.11a
• /
• pp.171-184
• /
• 2005

As recently, ' International convention for the control and management of ship's ballast water and sediments ' was adopted, it is necessary to accept the international convention in Korea. The systems of foreign countries for ship's ballast water control and management were investigated, and domestic environment-related laws were reviewed and compared regarding the discharge of industrial wastewater and ship's ballast water. Alternative measures of domestic legislation were suggested for acceptance of the international convention.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.11 no.2 s.23
• /
• pp.83-96
• /
• 2005

As recently, 'International convention for the control and management of ship's ballast water and sediments' was adopted, it is necessary to accept the international convention in Korea The movements of foreign countries for ship's ballast water control and management were investigated, and domestic environment-related laws were reviewed and compared regarding the discharge of industrial wastewater and ship's ballast water. Alternative measures of domestic legislation were suggested for acceptance of the international convention.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.8 no.2
• /
• pp.23-27
• /
• 2002

Reballasting at sea, as recommended by the IMO guidelines, currently provides the best-available measure to reduce the risk of transfer of harmful aquatic organisms, but is subject to serious ship-safety limits. It is therefore extremely important that alternative, effective ballast water management and treatment methods are developed as soon as possible, to replace reballasting at sea. Filtration-Ultraviolet radiation-Electrolytic process (FUE) was evaluated for disinfection of seawater used In ballast water Optimal current density and UV light intensity were 2.0A/dm$^2$ and, 220㎼/$\textrm{cm}^2$/m with which 100% reduction time was 2sec in a Ultraviolet radiation-Electrolytic process. This study showed that FUE process was effective for the disinfection of commonly isolated bacteria and bacillus from ballast water.

• 한국기계연구소 소보
• /
• s.15
• /
• pp.117-125
• /
• 1985

It is usual practice to ballast a sip to maintain requires operational safety at sea. However, excessive ballasting may reduce the operational economy of a ship. Therefore, The determination of the optimal location and quantity of ballast water is one of the important works at the preliminary design stage. To provide a convenient tool to ship designers the program for the determination of the optimal location and program the effect of the change of ballast water quantity in each tank on some characteristics of a ship, such as trim, initial stability and heel, is investigated and the minimum quantity of ballast water for each tank which satisfies the operational safety requirements is calculated.

• ALGAE
• /
• v.26 no.2
• /
• pp.181-192
• /
• 2011

Ballasting and deballasting of shipping vessels in foreign ports have been reported worldwide as a vector of introduction of non-native aquatic plants and animals. Recently, attention has turned to ballast water as a factor in the global increase of harmful algal blooms (HABs). Many species of microalgae, including harmful dinoflagellate species, can remain viable for months in dormant benthic stages (cysts) in ballast sediments. Over a period of four years, we surveyed ballast water and sediment of ships docked in two ports of Tampa Bay, Florida, USA. Sampling conditions encountered while sampling ballast water and sediments were vastly different between vessels. Since no single sample collection protocol could be applied, existing methods for sampling ballast were modified and new methods created to reduce time and labor necessary for the collection of high-quality, qualitative samples. Five methods were refined or developed, including one that allowed for a directed intake of water and sediments. From 63 samples, 1,633 dinoflagellate cysts and cyst-like cells were recovered. A native, cyst-forming, harmful dinoflagellate, Alexandrium balechii (Steidinger) F. J. R. Taylor, was collected, isolated, and cultured from the same vessel six months apart, indicating that ships exchanging ballast water in Tampa Bay have the potential to transport HAB species to other ports with similar ecologies, exposing them to non-native, potentially toxic blooms.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.3
• /
• pp.189-197
• /
• 2014

Collection and management of various information related to the ballast water are the essential components for the efficient implementation of the IMO Ballast Water Management Convention. Based upon the ballast water risk assessment and information system developed by other states, regions or even at global level, an integrated information system has been established to be applied to our domestic ports. The integrated information system is composed of four DataBases (DB) which are the Shipping DB, Ballast water DB, Port Environment DB and Species DB. The Shipping DB has been established based on the data collected from the Port Management Information System (Port-MIS). For the Ballast water DB, Ballast water has only been estimated by the loading/unloading of the cargoes as the convention has not come into effect yet. The Port Environment DB and Species DB are being established based on the reference documents and existing and newly collected monitoring data. From these DB, the integrated information system will be able to provide a base for the information search, statistic analysis and risk assessment of ballast water. Once the convention comes into effect, this integrated information system will be applied to manage the domestic ballast water discharge and also the port management.