• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.126-129
• /
• 2006

The marine environment is under considerable threat from intentional or accidental oil spills, ballast water discharged, dredging and infilling for coastal development, and uncontrolled sewage and industrial wastewater discharges. Monitoring spills and illegal oil discharges is an important component in ensuring compliance with marine protection legislation and general protection of the coastal environments. For the monitoring task an image processing system is needed that can efficiently perform the detection and the tracking of oil spills and in this direction a significant amount of research work has taken place mainly with the use of radar (SAR) remote sensing data. In this paper the level set image segmentation technique was tested for the detection of oil spills. Level set allow the evolving curve to change topology (break and merge) and therefore boundaries of particularly intricate shapes can be extracted. Experimental results demonstrated that the level set segmentation can be used for the efficient detection and monitoring of oil spills, since the method coped with abrupt shape’s deformations and splits.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.141-141
• /
• 2017

국제해사기구(International Maritime Organization)는 선박 평형수로 인하여 발생하는 환경문제를 방지하기 위하여 지난 2004년 선박 평형수 관리 협약을 제정하였고, 2016년 핀란드의 비준함에 따라 2017년 9월 8일부터 발효될 예정이다. 이 협약에 대응하기 위하여 선박 평형수 처리기술이 개발되어 승인이 되었다. 이중 수중방전을 이용한 기술은 화학약품의 첨가 등이 없어 경제적이고 내부에서 발생하는 OH라디컬, 자외선, 충격파, 전기장, 오존 등에 다양한 요소들에 의하여 수처리가 가능하고, 중화를 위한 첨가제 등이 필요없어 친환경적이다. 본 연구에서는 부산 항만 근처연안에서 채취한 바닷물을 대상으로 수중방전을 이용한 방법을 연구하였다. 실험방법은 그림1과 같이 Point to Point 방식의 전극을 꾸몄고, 용액은 1L이며, 전압은 8kV, 30kHZ로 가해주었다. 광학분석장비(OES)를 이용하여 수중방전시 발생되는 빛 분석을 하였다. 실험결과 OES분석 결과 살균작용하는 OH 라디컬이 발생하는 것을 확인할 수 있었다. 또한 실험 도중 시료를 채취하여 $35^{\circ}C$ 48시간동안 배양하였다. 배양 결과 시간이 경과함에 따라 미생물의 개체가 그림 2와 같이줄어두는 것을 확인할 수 있었다.

• Journal of Ship and Ocean Technology
• /
• v.3 no.3
• /
• pp.1-12
• /
• 1999

Spectral fatigue damage calculations has been performed on four ships in order to assess the effect that the probabilistic modeling of sea states has on the estimated fatigue life. The damage estimation method is based on the Miner- Palmgren fatigue damage formulation and a spectral approach is used to determine the necessary variances of the stress processes. Both the horizontal and vertical hull girder bending induced stress process together with the local water pressure induced stress process is taken into account. The wave scatter diagrams are applied in the calculations and their fatigue severity is assessed by analyzing the results obtained with the ten scatter diagrams and the four ships. All four ships are analyzed both in full load and ballast conditions and while traveling at both full and reduced speed. It is found that the fatigue severity of a wave scatter diagram is dependent on several parameters, some of these being the extreme wave hight extrapolated from the scatter diagram and the mean zero up-crossing period in conjunction with the ship length . Based on these three parameters and expression is derived in order to calculate one single number describing the fatigue severity of a scatter diagram with respect to a certain ship.

• Journal of Power System Engineering
• /
• v.14 no.6
• /
• pp.67-74
• /
• 2010

Many tanks are installed in ship and marine structures. They are often in contact with inner or outer fluid, like ballast, fuel and cargo tanks. Fatigue damages are sometimes observed in these tanks which seem to be caused by resonance with exciting force of engine and propeller. Vibration characteristics of these thin walled tanks in contact with fluid near engine and propeller are strongly affected by added mass of containing fluid. Therefore it is essentially important to estimate the added mass effect to predict vibration of the tanks. Many authors have studied vibration of cylindrical and rectangular tanks containing fluid. Few research on dynamic interaction among tank walls through fluid are reported in the vibration of rectangular tanks recently. In case of rectangular tanks, structural coupling between adjacent panels and effect of vibration modes of multiple panels on added mass have to be considered. In the previous report, A numerical tool of vibration analysis of a 3-dimensional tank is developed by using finite element method for plates and boundary element method for fluid region. In this paper, the coupling effect between panels of a tank on added mass of containing fluid, the effect of structural constraint between panels on each vibration mode for fluid region and mode characteristics in accordance with changing breadth of the plates are investigated numerically and discussed.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.3
• /
• pp.224-230
• /
• 2015

Vessels are traditionally optimized for a single condition, normally the contract speed at the design draft. The actual operating conditions quite often differ significantly. At other speed and draft combinations, adjusting the trim can often be used to reduce the hull resistance. Changing the trim is easily done by shifting ballast water. There are several ways to assess the effect of the trim on the hull resistance and fuel consumption, including in-service measurements, model tests, and CFD. In this paper, CFD is employed for the assessment of the resistance performance according to the trim conditions. The commercial CFD code of the STAR-CCM+ is utilized to evaluate the ship’s resistance performance on a 6,800 TEU container ship. To validate of the effectiveness of STAR-CCM+, the experimental result of the KCS hull form is compared with the result from STAR-CCM+. It is found that the total resistance of the 6,8000 TEU container ship was reduced by 2.6% in the case of a 1-m trim by head at 18knots.

• Journal of Navigation and Port Research
• /
• v.28 no.8
• /
• pp.767-773
• /
• 2004

IMO(International Maritime Organization) is strongly proceeding with adoption of a new maritime environmental convention and coming into r1fed for regulation enhancement about the pollutants which are happened in a ship recently. Study about the conventions that our country currently comes into r1fect, and there is during forwarding and correspondence must be performed effectively. In this paper, International convention on the control of harmful Anti-Fouling system on ship, Ballast water management, Prevention of air pollution from ships, treat a main pending problem in ocean related environmental regulation convention.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.5 no.1
• /
• pp.11-18
• /
• 1993

A key element of a successful search and rescue is the correct prediction of the target location. In this paper, new computer models for drift prediction are suggested from the analysis of several methods currently used in other countries. Depending on the availability of the environmental data, users may select a model between the modified versions of U.S. Coast Guard CASP and FLENUMWEACEN SAR. Targets include boats, life rafts and person in water. Life rafts and boats are further classifed. New models are tested and compared with the limited number of field experimental results.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.10
• /
• pp.39-46
• /
• 2015

REMICON(Ready Mixed Concrete), the most essential material of construction work, is produced from facility called "Batcher plant." In order to produce Remicon, Batcher Plant needs to be supplied with basic raw material such as ballast, sand, cement, admixture and water. In remicon industry, overland transport vehicles are used during the whole manufacturing process from producing to infilling at the construction site. Thus, the transportation cost sums up be to 20 percent of whole manufacturing cost and transport capacity and distance travelled have direct and major effect on manufacturing costs. This paper suggests a method to find optimal location of batcher plant using modified Steiner point, suggesting the most effective and flexible connection through among construction site, aggregate, cement and remicon producing plant. This paper also proposes reducing of transport cost at maximum 60% by calculation through optimized plant location. The modified Steiner point theory proposed in this paper also can be applied to optimal location of a $2^{ry}$ substation or MCC panel for minimizing of power loss, voltage drop, line distance and etc.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.34
• /
• pp.18-32
• /
• 2013

최근 선저 부착 생물에 관한 문제가 환경오염으로 확대되고 그에 따른 여러 가지의 선체 방오 방법 중 특히 주석(Sn)의 화합물질의 화학반응으로 따개비 등의 오염 요소를 방지하는 기존 방법이 수은, 구리 등의 유독성 화합물에 의해 임포섹스 유발과 그에 따른 2차 오염 확산의 요인이 되어 2012년 7월부터는 유기주석화합물(TBT) 도료를 사용한 신규 선박은 규제되는 등 그 심각성이 대두하고 있다. TBT는 매우 미량의 농도에서도 다양한 생물학적 저해영향을 일으키는 것이 알려져 이를 대체하기 위한 여러 화학물질이 개발됐다. 본 논문에서는 이러한 추세에 따라서, 유독성 화합물의 독성을 벗어나 저 전류의 고주파 고전압 펄스 에너지를 이용한 새로운 환경조성을 통해서 부착성 패류의 선저 부착에 대한 특성을 연구하였으며, 특히 환경오염 및 해양오염에 영향이 적은 방오시스템을 개발하고자 하였다. 또한 본 연구에서 적용된 고전압 펄스 시스템을 이용하여 선체의 부식정도를 저감 가능한 시스템을 구현을 위한 기초 실험과 현재 이슈화 되고 있는 선박평형수의 살균장치에 적용하는 파생연구들을 통하여 해양오염방지 요소들을 겨냥하여 후속연구를 위한 토대를 마련하고자 하였다.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2015.09a
• /
• pp.56-62
• /
• 2015

In ship structure, many parts are in contact with inner or outer fluid as stern, ballast and oil tanks. Fatigue damages are sometimes observed in these tanks which seem to be caused by resonance with exciting force of engine and propeller. Vibration characteristics of these tanks in contact with fluid are significantly affected by fluid coupling effect. Therefore it is important to exactly predict vibration characteristics of tank structure. In order to estimate the vibration characteristics, the fluid-structure interaction(FSI) problem should be solved precisely. But it is difficult to estimate exactly the magnitude of the fluid coupling effect because it has some problems such as a fluid-structure interaction, influence by the free surface, vibration modes of structural panels and depth of water. In this paper, with fluid coupling effect, the effect of structural constraint between panels on the vibration characteristics are investigated numerically and discussed.