• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.336-342
• /
• 2017

Recently, there has been an increasing need for underwater communication systems to monitor ocean environments and prevent marine disasters, as well as to secure ocean resources. Most underwater communication systems adopted acoustic communication with a consideration of attenuation, absorption, and scattering in conductive sea water, and developed fully digital modems based on processors. In this study, a digital up converter (DUC) and a digital down converter (DDC) was developed for an underwater basestation based on underwater acoustic communication systems. Because one of the most important issues in underwater acoustic communication systems is low power consumption due to environmental problems, this study developed a specific hardware module for DUC and DDC. It supported four links of underwater acoustic communication systems and converted the sampling rate and frequency. The systemwas designed and verified using Verilog-HDL in ModelSim environment with the test data generated from baseband layer parts for an underwater base station.

• Journal of Forest and Environmental Science
• /
• v.36 no.3
• /
• pp.219-224
• /
• 2020

Urea formaldehyde resins are widely used in the manufacturing of wood composite and their usage is always combined with release of formaldehyde characterized to be hazardous to health during and after the manufacturing of the products. This study investigates the effectiveness of wood-based adhesive from oil of pyrolysed Triplochiton scleroxylon sawdust for the production of composite board. The wood-derived Pyrolytic Oil (PyO) was blended with Urea Formaldehyde (UF) resin to formed Pyrolytic Oil-Urea Formaldehyde (PyOUF). The obtained PyOUF called Wood-Based Adhesives at four blends and control (UF) viz; 1:1, 1:2, 1:3, 2:1, 1:3 were further employed to prepare the composite board and test for their bonding strength by physical (water absorption-WA and thickness swelling-Th.S) and mechanical properties (modulus of elasticity-MOE, modulus of rupture-MOR, and impact bending-IB). Data obtained was analysed using analysis of variance at α 0.05. The result of analysis of variance conducted on physical properties show significant difference (p≤0.05) between the WA values obtained when testing the different blending proportion of PyOUF and likewise between 2 and 24 h of immersion. PyOUF had significant effect (p≤0.05) on Th. S for 24 h but no significant different (p>0.05) for the 2 h period of soaking. The analysis of variance on mechanical properties of the composite board (MOE, MOR, and IB) show significance differences (p≤0.05) between the strength values obtained when testing the different ratios of PyO with UF. PyO content influenced the properties of the boards and it is evident that PyO can be used in the manufacture of composite board.

• Advances in Traditional Medicine
• /
• v.7 no.1
• /
• pp.51-64
• /
• 2007

Mucus is an aqueous gel complex with a constitution of about 95% water, high molecular weight glycoprotein (mucin), lipid, salts etc. Mucus appears to represent a significant barrier to the absorption of some compounds. Natural mucoadhesive agent was isolated and purified from the aqueous extract of the seeds of prosopis pallida (PP). Formulated tablet with the isolated material by wet granulation method. Some natural edible substances are in consideration for candidates as mucoadhesive agents to claim more effective controlled drug delivery as an alternative to the currently used synthetic mucoadhesive polymers. Subjected the materials obtained from natural source i.e. PP and standard synthetic substance, sodium carboxymethyl cellulose for evaluation of mucoadhesive property by various in vitro and in vivo methods. Through standard dissolution test and a model developed with rabbit, evaluated in vitro controlled release and bioadhesive property of theophylline formulation. Mucoadhesive agent obtained from PP showed good mucoadhesive potential in the demonstrated in vitro and in viνo models. The results suggest that the mucoadhesive agent showed controlled release properties by their application, substantially. In order to assess the gastrointestinal transit time in vivo, a radio opaque X-ray study performed in healthy rabbit testing the same controlled release formulation with and without bioadhesive polymer. Plasma levels of theophylline determined by the HPLC method and those allowed correlations to the in vitro mucoadhesive study results. Better correlation found between the results in different models. PP may acts as a better natural mucoadhesive agent in the extended drug delivery system.

• The Korean Journal of Food And Nutrition
• /
• v.13 no.6
• /
• pp.521-528
• /
• 2000

Conditions for processing dried condiments with powdered sea tangle were investigated. The most appropriate method for sea tangle extraction was two-stage extraction, that extracted with addition of 70% ethyl alcohol at $25^{\circ}C$ for 1 hour and residue was re-extracted with water(1:15, w/w) at 7$0^{\circ}C$ for 3 hours. The yield of soluble solids under above-mentioned conditions was 14.9%. As a result of omission tests, free amino acids were predominated in the taste compounds of sea tangle extracts rather than nucleotides, and the contribution of free amino acids and nucleotides to the taste of sea tangle extracts was remarkable. The major flavoring components of sea tangle extracts were matters of low molecular weight such as free amino acids and oligopeptides below 5,700 dalton. Contents of carbohydrate, total nitrogen and amino nitrogen in dried condiments prepared with sea tangle extracts were 64.9%, 3.7% and 2.1%, respectively. And drying yield, solubility and absorption rates at Aw 0.88 were 14.7%, 98.3% and 8.4%, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.2
• /
• pp.55-69
• /
• 1995

The primary objective of this research was to investigate optimum manufacturing condition of thin composite panels composed of sawdust, polyethylene film and polypropylene net. At the study the experiment was designed to make thin board in which sawdust offers effectiveness as core composing material, polyethylene as adhesive with added urea resin, and polypropylene as stiffness and flexibility in the composition panel. 100 types of thin composite panels were manufactured according to press-lam and mat-forming process of various hot pressing conditions(pressure, temperature and time). They were tested and compared with control boards on bending properties(MOR, MOE, SPL, WML), internal bond strength, thickness swelling, linear expansion and water absorption. At the same time the visual inspections of each types of panels were accomplished. The physical and mechanical properties of composite types passed by visual inspection were analyzed by Tukey's studentized range test. From the statistical analysis, the optimum manufacturing condition of thin composite panels were selected. Compared with two manufacturing processes, mat-forming process performed better than press-lam process in all tested properties. The optimum manufacturing conditions resulted from the experiment and statistical analysis were able to determine as following: the press temperature was shown the most good result at 130$^{\circ}C$ in mat forming process and 140$^{\circ}C$ press lam process, the press time 4 min in both processes, but the press pressure was 25-10kg/$cm^2$ in mat forming and 15k/$cm^2$ press lam process.

• Journal of Sericultural and Entomological Science
• /
• v.36 no.1
• /
• pp.37-43
• /
• 1994

The effects of some sodium phosphates as auxiliary agents were studied on the blockade of hardness for silk degumming. In this work, four kinds of sodium phosphates were tested and the results were obtained through masking effects of metallic ions, difference of pH value and boil-off ratio. The degumming of calcium ingredient was analyzed by means of atomic absorption spectrophotometer and degumming test of cocoon shell was performed in the presence of calcium ingredient and sodium phosphates added to soap solution. In the view of the effects of sodium phosphates on calcium hardness, tetrasodium pyrophosphate(TSPP) and sodium phosphate dibasic(SPD) masked calcium ions more than sodium phosphate monobasic(SPM) and sodium hexametaphosphate(SHP). SHP and TSPP have excellent abilities of masking ferrous ions. The pH values of TSPP solution is higher than others, but lower than soap solution. The pH values were differently measured one another among the sodium phosphates but the boil-off ratio was increased in case of sodium phosphate with high pH value.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.13-18
• /
• 2016

Humidifiers are used to control indoor humidity. Element-type humidifiers have the advantages of simple structure and low energy consumption, and Japanese products have been widely used for the humidifying elements. In this study, a new humidifying element made of cellulose and PET was developed, and the performance was compared with that of a Japanese element. The mass transfer rates and pressure drops were measured for an element installed at the entrance of a suction-type wind tunnel. The humidification efficiency of the new element was 2 to 4% greater and the pressure drop was 23 to 32% smaller compared to the Japanese element. The mass transfer effectiveness ($j_m/f$) of the new element is also 5 to 28% higher. However, the water absorption capacity was smaller than that of the Japanese element, meaning further development is needed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.1
• /
• pp.74-82
• /
• 2017

In this study, we prepared a core material based on the inorganic materials in liquid form for applying an inorganic-based core material to a core material for the self-healing capsules as a part of the basic study to manufacture of self-healing capsule that can heal cracks of cementitious composite. Manufactured core material based on the inorganic materials were applied directly to the cement composite before its encapsulation, were evaluated the effect on performance of cementitious composite as wall as repair performance of the cracks in the cracks. The test results showed that core material based on the inorganic materials was effective to improve the compressive and adhesion strength, had an absorption, permeation water, penetration of chloride iones and freeze-thaw resistance performance. Through the results of this paper, we want to utilize the results as a basis data of the performance of the cement composite that can be obtained when applied to inorganic core materials based on self-healing capsules and future advances localized self-healing capsule technology.

• The Journal of Natural Sciences
• /
• v.19 no.1
• /
• pp.45-55
• /
• 2008

Alzheimer's disease is charaterized by the acetylcholine depletion, amyloid b-protein aggregation and neurofibrillary tangles. The prevention of the breakdown of acetylcholine by acetylcholinesterase (AChE) inhibitor has the best clinically therapeutic efficacy for Alzheimer's disease patients. To develop new antidementia alternative drugs or nutraceuticals, methanol extracts of Sorghum bicolor was screened from various extracts of cereals and legumes as a potent AChE inhibitor-containing extract in previous paper. In this paper, physicochemical properties of the methanol extracts was investigated. The methanol extracts was soluble by water, methanol and DMSO and had 215 nm and 282nm of maximum absorption spectra. It was also stable at 20-$100^{\circ}C$ and pH 2.0-10.0 for 1 hr. Test product was prepared by using methanol extracts from Sorghum bicolor and changes of its quality during storge at $20^{\circ}C$ and $40^{\circ}C$ were investigated. It was very stable for 8 weeks at $40^{\circ}C$.

• Archives of Pharmacal Research
• /
• v.13 no.2
• /
• pp.151-160
• /
• 1990

In order to develop a controlled-release oral drug delivery system (DDS) which sustains the plasma acetaminophen (AAP) concentration for a certain period of time, microporous membrane-coated tablets were prepared and evaluated in vitro. Firstly, highly water-soluble core tablet of AAP were prepared with various formulations by wet granulation and compression technique. Then the core tablets were coated with polyvinychloride (PVC) in which micronized sucrose particles were dispersed. Effect of formula compositions of core tablets and coating suspensions on the pharmaceutical characteristics such as drug release kinetics and membrane stability of the coated tablets was investigated in vitro. AAP was released from the coated tablets as a zero-order rate in a pH-independent manner. This independency of AAP release to pH change from 1.2 to 7.2 is favorable for the controlled oral drug delivery, since it will produce a constant drug release in the stomach and intestine regardless of the pH change in the GI tract. Drug release could be extended upto 10 h according to the coating condition. The release rate could be controlled by changing the formula compositions of the core tablets and coating suspensions, coat weight per each tablet, and especially PVC/sucrose ratio and particle size of the sucrose in the coating suspension. The coated tablets prepared in this study had a fairly good pharmaceutical characteristics in vitro, however, overall evaluation of the coated tablet should await in vivo absorption study in man.