• Journal of Korea Society of Waste Management
• /
• v.35 no.8
• /
• pp.721-730
• /
• 2018

We investigated the effects of heavy metals in cement in the last 3 years and the amount of waste in the cement manufacturing process. The result shows that the average $Cr^{6+}$ content in cement products is controlled at 10 mg/kg. Cu and Pb have lower detection tendency in white cement than in ordinary portland cement. In addition, heavy metals such as Cd show a certain level of detection regardless of the input wastes. Copper slag and phosphate gypsum are the main influencing factors on the heavy metals in cement products. In auxiliary fuels, plastics waste and wood waste are considered to affect heavy metals in cement products. Alternative raw materials are considered to be affected by the alternative raw materials managed as byproducts. In the case of supplementary fuels, auxiliary fuels managed as waste instead of auxiliary fuels managed as byproducts affect the heavy metals in cement. This study examined the input amount without considering the heavy metals in each waste. Therefore, the result may vary in different situations, and further research must be conducted to supplement the findings. However, if the heavy-metal contents in the waste are constant, it can be used as a reference material for the control of heavy metals in cement products.

• Journal of Korea Society of Waste Management
• /
• v.35 no.7
• /
• pp.670-682
• /
• 2018

Engineered nanomaterials (ENMs) can be released to humans and the environment through the generation of waste containing engineered nanomaterials (WCNMs) and the use and disposal of nano-products. Nanoparticles can also be introduced intentionally or unintentionally into waste streams. This study examined WCNMs in domestic industries, and target nanomaterials, such as silicon dioxide, titanium oxide, zinc oxide, nano silver, and carbon nanotubes (CNTs), were selected. We tested 48 samples, such as dust, sludge, ash, and by-products from manufacturing facilities and waste treatment facilities. We analyzed leaching and content concentrations for heavy metals and hazardous constituents of the waste. Chemical compositions were also measured by XRD and XRF, and the unique properties of nano-waste were identified by using a particle size distribution analyzer and TEM. The dust and sludge generated from manufacturing facilities and the use of nanomaterials showed higher concentrations of metals such as lead, arsenic, chromium, barium, and zinc. Oiled cloths from facilities using nano silver revealed high concentrations of copper, and the leaching concentrations of copper and lead in fly ash were higher than those in bottom ash. In XRF measurements at the facilities, we detected compounds such as silicon dioxide, sulfur trioxide, calcium oxide, titanium dioxide, and zinc oxide. We found several chemicals such as calcium oxide and silicon dioxide in the bottom ash of waste incinerators.

• Proceedings of the Korean System Dynamics Society
• /
• 2000.07a
• /
• pp.65-102
• /
• 2000

In 1987, The Brundtland Report defined a sustainable development as the development that meets the needs of the present without compromising the ability of future generations to meet their own needs. This is the concept that we should cling to, to preserve natural resources of the present for the future generation. With this concept in mind, this paper criticized that the current waste management policy has been neglecting resource preservation aspect of waste management policy while giving too much emphasis on reducing waste generation. Thus, the purpose of this paper is to analyze how waste management policy can affect preservation of natural resources, and to investigate policy alternatives that can reduce both the volume of waste generated and the amount of natural resources that need to be consumed in the production process. The study was conducted based on the literature survey and system dynamics simulation. Borrowing Randers and Meadows's solid waste model with some modification of parameter and variables, this paper simulate several policy alternatives to figure out the most effective waste management policy set that can meet the need of the present without compromising the ability of the future generation to meet their own needs. Main concern was how to link waste management policy with resource management policy that can lead to minimization of waste generation and resource consumption.

• Korean System Dynamics Review
• /
• v.1 no.2
• /
• pp.113-148
• /
• 2000

In 1987, The Brundtland Report defined a sustainable development as the development that meets the needs of the present without compromising the ability of future generations to meet their own needs. This is the concept that we should cling to, to preserve natural resources of the present for the future generation. With this concept in mind, this paper criticized the current waste management policy has been neglecting resource preservation aspect of waste management policy while giving too much emphasis on reducing waste generation. Thus, the purpose of this paper is to analyze how waste management policy can affect preservation of natural resources, and to investigate policy alternatives that can reduce both the volume of wast geverated and the amount of natural resources that need to be consumed in the production process. The study was conducted based on the literature survey and system dynamics simulation. Borrowing Randers and Meadows's solid waste model with some modification of parameter and variables, this paper simulate several policy alternatives to figure out the most effective waste management policy set that can meet the need of the present without compromising the ability of the future generation to meet their own needs. Main concern was how to link waste management policy with resource management policy that can lead to minimization of waste generation and resource consumption.

• Journal of Korea Society of Waste Management
• /
• v.35 no.8
• /
• pp.692-700
• /
• 2018

In this study, the results of PBDEs and HBCDs of the products and waste that contain BFRs such as domestic electronic products, automobiles and textile products were compared with international management standards, and their excess rates were calculated. Deca-BDE was detected among the PBDEs in TV rear cover plastics, car seats, automotive interior plastics, and automobile shredding residues of products and waste containing BFRs. The comparison with Basel Convention management standards (1,000 mg/kg) for PBDE-containing wastes (4 types in total) shows that the excess rate of all samples was less than 1.5%. The estimated excess rate compared to the EU and Basel convention management standards (1,000 mg/kg) for PBDEs (4 species + deca-BDE) and TV rear cover plastics was 37.5% (30 of 80 samples exceeded the standards). The estimated excess rate compared to the Basel convention management standards (1,000 mg/kg) for HBCD, building materials products and waste was 15.7% (17 of 108 samples exceeded the standards). In the case of PBDEs, it is necessary to remove only the rear cover of CRT TV among the electric and electronic products and treat it in the flame retardant treatment facility to improve the recycling collection system. In the case of HBCD, it is necessary to appropriately dispose of the recycled materials, heat insulation materials, TV plastics, and styrofoam in marine fishery among construction materials and restrict the use as recycled raw materials.

• Korean System Dynamics Review
• /
• v.5 no.2
• /
• pp.89-123
• /
• 2004

Using materials recovered from the waste stream instead of virgin resources as a raw material in manufacturing has great environmental and economic benefits. However, there is lack of public interest in needs for integrated waste management and its relevant facilities, because of NIMBY syndrome, This article has proposed a system dynamics model for the study of the potential and systemic consequences of resource circulation management system(RCMS) policy for a Sudokwon landfill site in Korea. The results of the study indicate that the effects of RCMS are seen continuously to increase in term with both the community welfare level and the resource and energy level. Moreover the effects of RCMS appear sharply in the first half of the simulation period.

• Resources Recycling
• /
• v.27 no.1
• /
• pp.14-21
• /
• 2018

The rapid increase in the consumption of products that contain rare metals has highlighted the importance of recycling and recovering resources from these products when they enter the waste stream. Among various metal resources that can be recovered, this study analyzes the waste streams of cobalt and palladium to determine how their waste resource circulation can be improved at each stage of the waste stream. The findings of this study point to improvements and strategies that can be made at individual stages. First, at the discharge/import stage, the implementation of tariff quotas for specific recycled metal resources is suggested to allow the systemic categorization of waste metals as resources. At the collection/discarding stage, a major problem is the instability in the supply of scrap metals, which may be better managed by changing the bidding process for the scrap metals. At the pretreatment stage, possible areas for improvement are uncovered concerning technical areas, such as technological development and improving the efficiency of material recycling, as well as policy-wise, for instance, expanding the regulation for manufacturers to produce products that are designed to facilitate resource recovery, increasing incentive for closed recycling, and refining the guidelines and standards for recycling. At the resource recovery stage, as the waste metal recycling industry consists of businesses that vary in size, policies to promote cooperation and coexistence between large and smaller enterprises will benefit the industry in the long-run. Lastly, at the product production/export stage, a tariff on exporting waste resources that contain cobalt and palladium will help control the amount of waste metals that are shipped abroad.

• Environmental Engineering Research
• /
• v.23 no.4
• /
• pp.456-461
• /
• 2018

The solid-state anaerobic digestion (SS-AD) has promoted the development and application for biogas production from biomass which operate a high solid content feedstock, as higher than 15% of total solids. However, the digested byproduct of SS-AD can be used as a fertilizer or as solid fuel, but it has serious problems: high moisture content and poor dewaterability. The organic residue from SS-AD has to be improved to address these problems and to make it a useful alternative energy source. Hydrothermal carbonization was investigated for conversion of the organic residue from the SS-AD of livestock waste to solid fuels. The effects of hydrothermal carbonization were evaluated by varying the reaction temperatures within the range of $180-240^{\circ}C$. Hydrothermal carbonization increased the calorific value through the reduction of the hydrogen and oxygen contents of the solid fuel, in addition to its drying performance. Therefore, after the hydrothermal carbonization, the H/C and O/C atomic ratios decreased through the chemical conversion. Thermogravimatric analysis provided the changed combustion characteristics due to the improvement of the fuel properties. As a result, the hydrothermal carbonization process can be said to be an advantageous technology in terms of improving the properties of organic waste as a solid-recovered fuel product.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2002.11a
• /
• pp.179-182
• /
• 2002

Today, augmentation of industrial wastes with industrial development demands diminution and recycling technical development for industrial wastes reduction. A statistical research of industry and constructional wastes as a request of the times can achieve the conservation of resource and the protection of environment. The ultimate object of the study is not only diminution and recycling of industrial wastes but also the degree of self-sufficiency in resource and the attainment of comfortable life environment, which can the accomplish the resource circulation system and make progress into the environmentally advanced country. The object of this investigation is industrial classification, a waste discharge quantity, a waste sort, waste disposal of industrial wastes in Yeung-nam area. The investigation of special quality in industrial wastes can be used to establish a wastes management policy and a disposition method .

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.3
• /
• pp.15-22
• /
• 2018

This study refers to the composting of DDM Environmental Resource Center, which is operating abnormally in the food waste public-resource facilities that are operating nationwide, in accordance with the initial operating conditions. Similar process cases were investigated to examine issues concerning unusual composting facilities in DDM environmental resource centers and to analyse the causes of the issues. In addition, several improvement measures and alternatives for converting abnormal driving facilities into normal driving facilities may be proposed, and major abnormal driver provisions that are highlighted as issues during field application may be resolved.