• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2005년도 생물공학의 동향(XVI)
• /
• pp.247-251
• /
• 2005

This research was performed for developing of biological treatment process of odor gas such as MEK, $H_{2}S$, and toluene, which is generated from the food waste recycling process. To establish the operational conditions of odor gas removal by small-scale biofiltration equipment, it was continuously operated by using toluene as a treating odor object. When the odor treating microorganisms were adhered to fibril form biofilter, high removal efficiency over 93% was obtained by biofilm formation. At 400 ppm of inlet odor gas concentration and 10 sec of retention time, the removal efficiency was 76% and 93% in 1st stage reactor and 2nd stage reactor, respectively. However, the removal efficiency remained over 97% at the operational conditions above 15 sec of retention time.

• 조명전기설비학회논문지
• /
• 제29권12호
• /
• pp.77-82
• /
• 2015

Ozone is a powerful disinfectant and oxidizing agent, and it is used in a wide range of applications, such as waste water treatment, food processing, etc.. There is also a great potential of using ozone in new emerging medical applications, such as ozone dentistry and ozone oxygen therapy. For these purposes, simple, small, compact and efficient sources of ozone are needed. In this study, in order to increase the current-voltage range of the discharge and to avoid the overheating of the gas in the ozonizer we suggested ozonizer of injection needle and plate electrode type(INP Type) with the gas through the needle. A ozonizer of INP type have been investigated by focusing on ozone concentration and yield according to flow rates and Gap of two electrodes. The results of studies of ozone production for DC corona discharge in oxygen at atmospheric pressure about the ozonizer of INP type. The ozone concentration and the generation yield increased as the gap of two electrodes and gas flow were decreased. Also, when the gap of two electrodes and gas flow with no change, the ozone concentration and generation yield each have variation of direct proportion and inverse proportion with discharge voltage.

• 공업화학
• /
• 제20권5호
• /
• pp.553-556
• /
• 2009

본 연구의 목표는 열분해 기술의 문제점을 보완하여 유가자원의 회수와 폐기물 처리의 효율을 높이는데 있다. 우선 경제성을 높이기 위해 기존 열분해온도(보통 $500{\sim}1000^{\circ}C$)보다 낮은 $450^{\circ}C$에서의 저온열분해 반응을 시도하였다. 촉매를 사용하여 반응온도와 반응시간을 단축할 수 있었고, 무 산소 상태를 유지시키는데 유리하도록 간접열을 사용하였다. 결과적으로 유가자원인 구리와 합성연료유의 회수율을 증가시킬 수 있었고, 발생하는 부산물과 배가스의 처리효과가 뛰어남을 알 수 있었다. 배가스는 2단의 중화조를 통과시켜 다이옥신은 거의 발생되지 않았으며, 나머지 대기환경기준의 측정항목 또한 기준치 이하를 보였다. 이번 연구에서는 앞에서 말한 저온 열분해장치(GTPK-001)를 제작하였고, 경제적으로나 친환경적으로 상용화 개발이 가능함을 알 수 있었다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2002년도 추계 학술대회논문집
• /
• pp.133-138
• /
• 2002

A 3-D axisymmetric computer program is developed to predict the NO behavior in SNCR system for the stoker incinerator with the waste treatment capacity, 200ton/day. To this end a turbulent reacting flow field calculation is made using proper assumption and empiricism. The stoker bed is assumed to be a homogeneous waste-volatilized gaseous state. The initial composition or reactants are assumed based on the data of the ultimate analysis. Turbulent is resolved by k-e model and turbulent reaction is handled by eddy-breakup model harmonized with empirical chemistry data for gaseous combustion, NO and urea reaction. The liquid droplet is traced by Lagrangian method incorporated by aerodynamic drag, Coriolis and crntrifugal forces. Radiation is treated by sensible heat loss model. Calculation results are in good agreement with experimental data at the outlet of post combustion chamber in Daejon 4th industrial complex. The flue gas shows the temperature range of $900\sim1000^{\circ}C$, velocity of 5m/s and NO concentration of 140ppm at the exit while the measured temperature, flue gas velocity and NO concentration are $967^{\circ}C$, $3\sim4m/s$ and $100\sim200ppm$respectively. Using the developed computer program a parametric study has been made with the variation of heat content of waste, castable length and SNCR variables for the determination of proper injector location. In general, the calculated results are consistent and physically acceptable.

• 자원ㆍ환경경제연구
• /
• 제10권4호
• /
• pp.591-617
• /
• 2001

For the past years, there had been some environmental cooperation among East Asian countries to reduce air pollution emissions from China. However, the progress of cooperation has been under developed because of lacking financial support, poor design of planning, and weak economic incentives for the industries. In this paper, some practical approaches have been suggested. First, electric trade to make Asian Grid among countries will be good alternatives for the fossil fuel, such as coal, for China. Secondly, natural gas pipeline from West China to Siberian pipeline would change the whole energy mix in this area around 2010, Therefore, it is very promising area for the energy industries to involve in gas project and get rid of many institutional barriers from China. Lastly, environmental industry is growing fast in East Asian. In China, waste treatment and management, air pollution control, and water quality management are some promising areas for the future. Hence it is desirable for Korea, Japan and China to make a eco-fund or company to boost up environmental technology as well as environmental market size.

• 대한화학회지
• /
• 제62권6호
• /
• pp.433-440
• /
• 2018

일반적으로 열분해가 폐인조대리석을 재활용하기 위해 적용되어 왔다. 그러나 기존의 열처리 장치는 폐인조대리석 내부로의 비교적 낮은 열전달 효율을 갖는다. 첨가하여 이 장치는 폴리메틸 메타크릴레이트(polymethyl methacrylate; PMMA)의 부분적 탄화 과정에서 불필요한 가스를 과도하게 생성하고 극히 고온에서의 가열로 인해 인화 위험성이 높다. 본 연구는 위의 문제점을 극복 하고자 폐인조대리석에 전분 용액을 첨가한 후 성형 상태에서의 열처리 공정을 제시한다. 실험 결과, 이 방법은 폐인조대리석의 열분해가 비교적 $350^{\circ}C$의 낮은 온도에서도 상당히 향상 되었음을 보였다. 이외에도 메틸메타 크릴레이트(methyl methacrylate; MMA) 및 ${\alpha}$-알루미나(${\alpha}-Al_2O_3$) 회수에 필요한 안전성 확보 및 에너지를 절감하는 효과를 보였다.

• 자원리싸이클링
• /
• 제9권6호
• /
• pp.23-30
• /
• 2000

현재 용도 폐기된 플라스틱의 대부분은 소각 또는 매립 처리되고 있기 때문에 사회적 문제가 되고 있다. 폐플라스틱을 효과적으로 재활용하기 위한 방법론의 하나로서, 고로공정에서의 연료화 기술이 개발되어 유럽 및 일본의 선진 제철소에서는 실용화 단계에 이르고 있다. 본 연구에서는 포항제철 주물선고로 풍구 4본을 대상으로 2종류의 폐플라스틱 130 ton을 연속적으로 시험취입조업을 하였다. 취입비 13.8kg/thm까지의 코크스 치환율은 0.98kg-coke/kg-plastic으로 평가되었으며, 폐플라스틱의 종류에 따른 영향은 나타나지 않았다. 폐플라스틱의 취입량이 증가할 수록 송풍압은 증가하였으며, 고로내 통기성도 악화되어 노체 하부의 열부하가 증대하는 경향을 나타냈다. 또한 폐플라스틱 취입량이 증대될수록 노정가스 이용율과 shaft효율이 감소하는 것으로 해석할 수 있었다.

• 한국환경보건학회지
• /
• 제14권1호
• /
• pp.63-71
• /
• 1988

This study is an experimental research on the anaerobic digestion of pig manure and night soil mixed waste at room temperature (25$\circ$C), and the results are shown below: 1. The steady-state condition based on gas production as digestion temperature dropped to 25$\circ$C from 35$\circ$C was achieved at around 28, 47, 56, 64 days respectively when its hydraulic retention time(HRT) are 10, 20, 30, 40 days. 2, Alkalinity and volatile acid(VA) was increased as increasing the organic loading. 3. Removal efficiency of chemical oxygen demand(COD) and biochemical oxygen demand (BOD) was improved as longer HRT, and generally COD value is lower and BOD value is higher relatively. 4. Overall treatment efficiencies of mixed waste are higher than of pig manure and of night soft. 5. Organic removal efficiency at room temperature (25$\circ$C) is 20-25% lower at medium temperature (35$\circ$C) in a same VS loading condition. 6. Refractory fraction of the infiuent VS and organic removal rate constant(K) estimated at around 37% and 0.107/day respectively.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권2호
• /
• pp.255-261
• /
• 2002

Concrete structures stand in poor surrounding than it has ever been met before, because they are installed in severe conditions such as chloride penetration. $CO_2$ gas, water and so on. Therefore, the countermeasure to efficiently protect from the deterioration of concrete structures should be urgently considered. From this point of view, this study was aimed to develop surface treatment systems for concrete structures, which cover physical properties, long term durability and economic consideration. Developing the optimal surface treatment materials, powder type polymer or liquid type polymer was added to inorganic base materials. Three surface treatment materials which had shown best results in primary tests were selected and durability tests were fulfilled. Consequently optimum surface treatment material was developed. The surface treatment materials, which were developed through this study, can efficiently extend the service life of concrete structures. As a result, the life cycle cost should be reduced and the waste of material resources would be cut down.

• 한국지반환경공학회 논문집
• /
• 제10권2호
• /
• pp.37-43
• /
• 2009

우리나라는 경제발전과 더불어 하수종말처리장과 음식물쓰레기처리시설의 수가 꾸준히 증가해왔다. 이들 시설들은 상수원 수질보전과 음식물쓰레기 재활용과 같은 긍정적인 역할을 수행하지만 한편으로는 심각한 악취문제를 유발해 인근주민들의 쾌적한 생활을 해치고 있는 실정이다. 이에 본 연구에서는 부산시 환경기초시설에서 발생되고 있는 탈수슬러지케잌 및 음식물쓰레기샘플을 채취, 황화수소 발생 가능량을 예측함과 동시에 발생 가능량이 많을 것으로 나타난 1개 시료를 선정하여 실험실 규모의 Flux Chamber 실험을 통해 대기 시료를 포집하여 GC/FPD분석을 실시, 혐기성 상태일 때 이들 처리장폐기물에서 대기 중으로 배출하는 황계열 악취물질에 대한 배출농도 측정결과를 제시하고자 하였다. 황화수소발생량이 가장 많은 시료는 녹산 하수처리장의 슬러지 샘플로 농도가 156.18mg/kg이었고, GC/FPD로 분석을 실시한 결과를 토대로 악취농도지수(Odor Quotient)를 산정해 본 결과 개별 악취물질중 $CH_3SH$(methylmercaptan)이 총악취농도지수에서 차지하는 비율이 47.3%로 가장 주요 악취원인물질로 나타났다.