• International Journal of Concrete Structures and Materials
• /
• 제2권1호
• /
• pp.35-39
• /
• 2008

This experimental study examines the applicability of polymer mortar permanent forms using a methyl methacrylate (MMA) solution of waste expanded polystyrene (EPS) to develop effective recycling processes for the EPS, referring to the flexural behavior of a polymer-impregnated mortar permanent form with almost the same performance as commercial products. An MMA solution of EPS is prepared by dissolving EPS in MMA, and unreinforced and steel fiber-reinforced polymer mortars are mixed using the EPS-MMA-based solution as a liquid resin or binder. Polymer mortar permanent forms (PMPFs) using the EPS-MMA-based polymer mortars without and with steel fiber and crimped wire cloth reinforcements and steel fiber-reinforced polymer-impregnated mortar permanent form (PIMPF) are prepared on trial, and tested for flexural behavior under four-point (third-point) loading. The EPS-MMAbased PMPFs are more ductile than the PIMPF, and have a high load-bearing capacity. Consequently, they can replace PIMPF in practical applications.

• 한국안전학회지
• /
• 제9권1호
• /
• pp.95-99
• /
• 1994

Recently, there has been considerable concern about waste water discharges of chromium. The Chromium(IV) is of particular concern because this form has been demonstrated to be public health hazard. Chromium(IV) could be removed by the method of electrolysis from plating waste water. It was found that almost all of chromium(IV) present could be treated by electrolysis at current, 3A and pH 8.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 춘계학술논문요약집
• /
• pp.208-209
• /
• 2018

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 추계학술논문요약집
• /
• pp.325-326
• /
• 2018

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2017년도 춘계학술논문요약집
• /
• pp.263-264
• /
• 2017

• Design & Manufacturing
• /
• 제16권2호
• /
• pp.26-32
• /
• 2022

It is known that the fluidized bed incinerator, which is the subject of analysis, shows excellent performance in heat and mass transfer due to excellent mixing and contact performance between fluidized sand and fuel, and also shows relatively good combustion characteristics thanks to good mixing and long residence time for low-grade fuels. have. In this study, air flow analysis is performed to understand the characteristics of co-firing of sludge, waste oil and solid waste in the fluidized bed incinerator, flow characteristics of flue gas, and discharge characteristics of pollutants.The fluidized bed incinerator subject to analysis is a facility that incinerates factory waste and general household waste together with sludge, with a processing capacity of 32 tons/day. to be. In addition, the operation method was designed for continuous operation for 24 hours. As a result, it can be seen that the lower combustion air and the introduced secondary air are changed to a strong turbulence and swirl flow form and exit through the outlet while rotating inside the freeboard layer. The homogeneous one-way flow form before reaching the secondary air nozzle has very high diffusivity with the high-speed jet flow of the nozzle.

• 방사성폐기물학회지
• /
• 제4권4호
• /
• pp.345-352
• /
• 2006

붕산폐액을 함유한 시멘트 및 파라핀 고화체, 폐이온교환수지를 함유한 시멘트 고화체 그리고 잡고체중의 제염지에 대하여 Co-60을 조사선원으로 하여 $10^8$ rads까지 조사하여 발생되는 분해가스의 종류 및 그의 발생량을 분석하였다. 그 결과 분해가스로는 $H_2,\;CH_4,\;N_2,\;C_2H_6,\;O_2,\;CO$ 및 $CO_2$ 등이 발생하였으며, $H_2$가 대부분을 차지하였다. 가스발생량은 폐기물과 고화매질의 종류에 따라 $0.029{\sim}0.788\;cm^3.atm/1.1g$으로 상당한 차이를 보였으며, 폐이온교환수지를 함유한 고화체에서 가장 높은 분해가스 발생량을 보였다. 그리고 수소가스는 제염지 폐기물에서 가장 많이 발생하였다. 제염지의 $G(H_2)$는 0.12이었다.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 추계학술논문요약집
• /
• pp.317-318
• /
• 2018

• 터널과지하공간
• /
• 제8권1호
• /
• pp.26-36
• /
• 1998

To assess the groundwater flow near high-level radioactive waste repositories, it is important to understand the effect of coupling among thermal, hydraulic, and mechanical effects. In this paper, detailed mathematical approach to model the groundwater flow near the waste form surrounded by buffer, influenced by decay heat of radioactive waste along with stress change is developed. Two cases(1) before the full expansion of buffer and (2) after the full expansion of buffer are modelled. Based on the mathematical models in this paper, detailed numerical study shall be pursued later.

• Computers and Concrete
• /
• 제17권2호
• /
• pp.255-269
• /
• 2016

The waste glass sludge is a waste produced in the glass industry. It is in a dust form and disposed with water. In the disposal process, various cohesive agents are incorporated in order to precipitate the glass particles efficiently. In this paper, we investigate the pozzolanic reaction of the waste glass sludge incorporating precipitation additives experimentally. The consumption of calcium hydroxide, the setting time and the compressive strength and the pore structure were tested for two different types of the waste glass sludge depending on whether precipitation additives were used. It was found that the waste glass sludge incorporating the precipitation additives had a higher pozzolanic potential than the reference waste glass sludge without precipitation additives.