• Tribology and Lubricants
• /
• 제35권2호
• /
• pp.132-138
• /
• 2019

In this study, we demonstrate the effects of the acidic properties of montmorillonite (MMT), which is commonly used as a catalyst, on the conversion and selectivity of the dimer acid methyl ester (DAME) synthesis. We synthesize DAME by the dimerization of conjugated linoleic acid methyl ester (CLAME) and oleic acid methyl ester using MMT KSF. Incidentally, trimer acid methyl ester was formed as a by-product during the DAME synthesis. There is a necessity to adequately adjust the strength and quantity of the acid site to control the selectivity of DAME. Therefore, we vary the pH of the MMT acid by using various metal hydroxides. The purpose of this study is to increase the yield of monocyclic dimer acid methyl ester, which is a substance with adequate physical properties for industrial applications (e.g., lubricant and adhesive, etc.), using a heterogeneous catalyst. We report the dimerization of fatty acid methyl ester by using base treated-KSF, and apply it to conjugated soybean oil methyl ester. Then, we transmute the acid site properties of KSF, such as pH of 5 wt.% slurry KSF and various alkali metals (Li, Na, K, Ca). Characterization of base treated-KSF using a pH meter, x-ray diffraction, inductively coupled plasma-atomic emission spectrometer, Brunauer-Emmett-Teller surface analysis, and temperature-programmed desorption. We conduct an analysis of CLAME and DAME using nuclear magnetic resonance spectroscopy, gas chromatography, and gel permeation chromatography. Through these experiments, we demonstrate the effects of the acidic properties of KSF on the conversion and selectivity of the DAME synthesis, and evaluate its industrial potential by application to waste vegetable oil.

• 방사성폐기물학회지
• /
• 제18권1호
• /
• pp.31-41
• /
• 2020

본 연구에서는 우라늄 폐촉매 처리 공정에서 발생하는 우라늄 함유 폐기물 대상으로 유리-세라믹 매질 구조의 대형 디스크 소결체 형태로 제작 시, 최종 제작된 소결체의 비등방향 수축 특성 및 변형율 변화를 연구하였다. 본 연구에서는 최대 직경 40 cm를 갖는 다양한 크기 원형 디스크 형태와 원형 디스크의 1/4 크기의 부채꼴 형 소결체를 제작하여 이들의 비등방성 수축 특성을 평가하였다. 60 MPa 압력하에서 만들어지는 성형체는 소결 시 성형체의 크기 및 형태에 관계없이 높은 등방성 수축하였다. 제조된 전체 소결체에 대한 비등방성율은 평균 1.6%이었고 이때 평균 부피 감용율은 37.4% 이었다. 이러한 결과로부터 국내에서 발생한 우라늄 폐촉매를 처리하기 위한 공정에서 발생하는 우라늄 함유 폐기물은 대형 디스크 형태의 유리-세라믹 매질 형태로 고형화함으로써 높은 안정성과 부피감용 효과를 가지며 200 L 드럼에 포장될 수 있음이 확인되었다.

• 공업화학
• /
• 제31권1호
• /
• pp.57-60
• /
• 2020

An acetaldehyde, a representative food waste odor, was decomposed using a hybrid system comprised of a non-thermal plasma and catalyst at an ambient temperature under high humidity. A five wt.% Mn was impregnated on two differently structured microporous zeolites, namely Beta and ZSM-5, with a different molar ratio of SiO₂/Al₂O₃. Under high humidity conditions, the acetaldehyde degradation was higher in zeolites with the high ratio of SiO₂/Al₂O₃. Among studied catalysts, a five wt.% Mn/Beta (SiO₂/Al₂O₃ = 300) showed the highest acetaldehyde removal activity owing to its high hydrophobicity and reducibility. During long term stability test using the same catalyst for 110 hours, the acetaldehyde removal activity was relatively well-maintained.

• KSBB Journal
• /
• 제24권1호
• /
• pp.89-95
• /
• 2009

Biodiesel (fatty acid alkyl esters), which is produced from sustainable resources such as vegetable oil, animal fat and waste oils, have used to as substitutes for petro-diesel. In this study, we investigate the performance of 30 L and 300 L pilot-scale biodiesel production system using alkali-catalyst transesterification from soybean oil and rapeseed oil produced at Jeju island in Korea. The 30 L-scale biodiesel production was performed to in the condition of reaction temperature $65^{\circ}C$, catalyst amount 1% (w/w) and oil to methanol molar ratio 1 : 8. At that reaction condition, the fatty acid methyl ester contents of product are above 98% within reaction time 30 min. Also, the conversion yield of over 98% was obtained in 300 L-scale biodiesel production system using rapeseed oil and soybean oil. The quality of biodiesel produced from reaction system was satisfied to recommended quality standard of Korea. Our results may provide useful information with regard to the scale-up of more economic and efficient biodiesel production process.

• 한국물환경학회지
• /
• 제28권5호
• /
• pp.723-728
• /
• 2012

In this study, zeolites were synthesized by a fusion and a hydrothermal methods using a coal fly ash and a waste catalyst. The recovery performance of metal ions on the structure property of synthetic zeolites was evaluated as comparing the adsorption kinetics (Lagergen 2nd order model) and isotherm (Langmuir model) of $Co^{2+},\;Ni^{2+}$, and $Cu^{2+}$ ions. The synthetic zeolites (Z-C1 and Z-W5) were similarly assigned to XRD peaks in a reagent grade Na-A zeolite (Z-WK : $Na_{12}Al_{12}Si_{12}O_{48}\;27.4H_2O$). Adsorption rates of Z-W5 and Z-C1 were in the order of $Cu^{2+}\;>\;Co^{2+}\;>\;Ni^{2+}\;and\;Ni^{2+}\;>\;Cu^{2+}\;>\;Co^{2+}$, respectively. They had influenced upon structure properties of zeolite. Selectivities of metal ions and maximum equilibrium adsorption capacities, $q_{max}$, in Z-C1 and Z-W5 were in the order of $Ni^{2+}$ (127.9 mg/g) > $Cu^{2+}$ (94.7 mg/g) > $Co^{2+}$ (82.6 mg/g) and $Cu^{2+}$ (141.3 mg/g) > $Co^{2+}$ (122.2 mg/g) > $Ni^{2+}$ (87.6 mg/g), respectively. The results show that the synthetic zeolites, Z-C1 and Z-W5, are able to recover metal ions selectively in wastewater.

• 한국물환경학회지
• /
• 제26권2호
• /
• pp.303-310
• /
• 2010

Recently distinguished AOP means technology resolving organic compounds in water to harmless compounds such as $CO_2$ and $H_2O$ by creating OH radical ($OH{\cdot}$) with more powerful oxidation than general oxidants. It has merits which the 2nd pollution is not caused since it uses solar energy, sludge doesn't take place, it can be applied to high-density waste water and it oxidizes non-biodegradable organic compounds more easily. The purpose of the study was to examine about removable characteristics of phenol which was a non-biodegradable organic matter with UV/$O_3$/Catalyst processes which is one out of AOP and to present applicability of photocatalyst and the optimum conditions of treatment. The study regarded initial phenol concentration, initial pH, photocatalyst amount and flow as its conditions. As the results, the test had the highest removable efficiency (92%) when initial phenol concentration was 100 mg/L, initial pH 7, photocatalyst amount 6L and flow 1.5 mg/min. The removable efficiency was increased as much as initial phenol concentration was increased, when initial pH was 7 (neutrality), photocatalyst amount was increased and flow was increased. It was checked that the optimum HRT was 12 hours. Therefore, phenol is enough removable with UV/$O_3$/Catalyst process and its prospect in the future is expected.

• 공업화학
• /
• 제10권3호
• /
• pp.388-393
• /
• 1999

폴리우레탄 폼은 반복된 우레탄과 우레아 그룹을 가지고 있는 고분자 물질이다. 연질 폴리우레탄 폼을 이루고 있는 이 두 그룹들은 반응온도 $200^{\circ}C$, 글리콜, 초산 칼륨 촉매 존재 하에서 가열시키면 에스테르교환반응에 의해 분해되어 액상의 생성물을 형성한다. GPC, IR 분석을 이용한 생성물의 분자량과 성분 함량분포 측정을 통하여 촉매글리콜분해 반응기구를 조사하였다. 폴리우레탄 폼의 에스테르교환 반응에서는 우레탄 그룹이 우레아 그룹의 분해 반응속도보다 빨랐다. 이온화 경향이 큰 potassium acetate 촉매를 사용함으로써 alkoxide의 친핵성이 증진되어 에스테르교환 반응속도를 촉진시킴을 알 수 있다. 또한, potassium acetate와 strontium acetate 촉매를 사용한 촉매글리콜분해반응은 서로 같은 반응경로로 반응이 진행되지만 반응속도의 차이로 생성물을 구성하는 성분의 함량이 다름을 알 수 있었다.

• 공업화학
• /
• 제18권4호
• /
• pp.303-313
• /
• 2007

화학 산업과 관련된 많은 사업장에서 다양한 종류의 촉매를 사용하고 있으며 이들 촉매의 활성이 감소하면 산업 폐기물로서 폐기하고 있다. 또한 자동차에서 발생하는 폐 촉매의 양도 꾸준히 증가하고 있다. 활성이 감소되어 폐기된 촉매는 촉매가 지니고 있는 물리화학적 특성, 관련 환경 규제 및 경제적 효과를 고려하여 재생, 재이용, 또는 폐기될 수 있다. 폐기된 촉매는 휘발성 유기화합물(VOCs) 제거에 효과적인 것으로 알려진 귀금속이나 금속산화물을 포함하고 있으므로 적절한 처리과정을 거치면 VOCs 제거에 이용할 수 있다. 따라서 본 총설에서는 폐 촉매의 발생 및 사용 현황을 요약 정리하였으며, 특히 재생된 폐 촉매상에서 VOCs 촉매산화반응을 조사하여 그 결과를 소개하였다.

• 공업화학
• /
• 제19권2호
• /
• pp.209-213
• /
• 2008

바이오매스 폐기물로부터 수소를 생산하기 위하여 1 m 높이와 10.2 cm의 외경을 갖는 고정층 가스화 반응기를 이용하였다. 촉매를 첨가하지 않은 나왕톱밥과 촉매를 혼합한 나왕톱밥이 시료로 사용되었다. 고정층 가스화 실험 변수로써 온도와 촉매가 공정운전에 미치는 영향을 파악하였다. 반응온도가 $400^{\circ}C$에서 $700^{\circ}C$ 범위에서 온도변화에 따른 생성기체 조성의 변화는 온도증가에 따라 수소 생성량이 증가하였으며, 수소, 일산화탄소와 메탄의 생성분율은 탄산나트륨($Na_2CO_3$)과 탄산칼륨($K_2CO_3$) 촉매 사용에 의해서 증가하였다. 또한, 탄산나트륨 촉매는 탄산칼륨 촉매에 비하여 수소생산 효율에 보다 효과적인 것으로 판명되었다.

• Korean Chemical Engineering Research
• /
• 제60권1호
• /
• pp.70-79
• /
• 2022

Biodiesel production has attracted attention as a sustainable source of fuel and is a competitive alternate to diesel engines. The glycerol that is produced as a by-product is generally discarded as waste and can be converted to green chemicals such as acetins to increase bio-diesel profitability. Acetins find application in fuel, food, pharmaceutical and leather industries. Batch experiments and analysis have been previously conducted for synthesis of acetins using glycerol esterification reaction aided by sulfated metal oxide catalysts (SO₄^2-/CeO₂-ZrO₂). The aim of this study was to optimize process parameters: effects of mole ratio of reactants (glycerol and acetic acid), catalyst concentration and reaction temperature to maximize glycerol conversion/acetin selectivity. The optimum conditions for this reaction were determined using response surface methodology (RSM) designed as per a five-level-three-factor central composite design (CCD). Statistica software 10 was used to analyze the experimental data obtained. The optimized conditions obtained were molar ratio - 1:12, catalyst concentration - 6 wt.% and temperature -90 ℃. A packed bed reactor was fabricated and column studies were performed using the optimized conditions. The breakthrough curve was analyzed.