• Nuclear Engineering and Technology
• /
• 제45권5호
• /
• pp.675-682
• /
• 2013

The sequential separation process, composed of an oxygen sparging process for separating lanthanides and a zone freezing process for separating Group I and II fission products, was evaluated and tested with a surrogate eutectic waste salt generated from pyroprocessing of used metal nuclear fuel. During the oxygen sparging process, the used lanthanide chlorides (Y, Ce, Pr and Nd) were converted into their sat-insoluble precipitates, over 99.5% at $800^{\circ}C$; however, Group I (Cs) and II (Sr) chlorides were not converted but remained within the eutectic salt bed. In the next process, zone freezing, both precipitation of lanthanide precipitates and concentration of Group I/II elements were preformed. The separation efficiency of Cs and Sr increased with a decrease in the crucible moving speed, and there was little effect of crucible moving speed on the separation efficiency of Cs and Sr in the range of a 3.7 - 4.8 mm/hr. When assuming a 60% eutectic salt reuse rate, over 90% separation efficiency of Cs and Sr is possible, but when increasing the eutectic salt reuse rate to 80%, a separation efficiency of about 82 - 86 % for Cs and Sr was estimated.

• Nuclear Engineering and Technology
• /
• 제40권3호
• /
• pp.175-182
• /
• 2008

The results of process development for the blending of waste salt from the electrorefining of spent fuel with zeolite-A are presented. This blending is a key step in the ceramic waste process being used for treatment of EBR-II spent fuel and is accomplished using a high-temperature v-blender. A labscale system was used with non-radioactive surrogate salts to determine optimal particle size distributions and time at temperature. An engineering-scale system was then installed in the Hot Fuel Examination Facility hot cell and used to demonstrate blending of actual electrorefiner salt with zeolite. In those tests, it was shown that the results are still favorable with actinide-loaded salt and that batch size of this v-blender could be increased to a level consistent with efficient production operations for EBR-II spent fuel treatment. One technical challenge that remains for this technology is to mitigate the problem of material retention in the v-blender due to formation of caked patches of salt/zeolite on the inner v-blender walls.

• 방사성폐기물학회지
• /
• 제16권1호
• /
• pp.1-10
• /
• 2018

A simplified flowsheet for pyroprocessing commercial spent fuel is proposed in which the only salt treatment step is actinide drawdown from electrorefiner salt. Actinide drawdown can be performed using a simple galvanic reduction process utilizing the reducing potential of gadolinium metal. Recent results of equilibrium reduction potentials for Gd, Ce, Nd, and La are summarized. A description of a recent experiment to demonstrate galvanic reduction with gadolinium is reviewed. Based on these experimental results and material balances of the flowsheet, this new variant of the pyroprocessing scheme is expected to meet the objectives of minimizing cost, maximizing processing rate, minimizing proliferation risk, and optimizing the utilization of geologic repository space.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.133-138
• /
• 2005

The worldwide trend of waste treatment technology is rapidly transferring from "incineration system" to "gasification & melting system" which can derive the resources from waste and charge no more environmental burden to nature. And therefore it is necessary to adopt gasification & melting system to prevent the land pollution and to solve the problem of landfill area. Among several thermal waste treatment processes gasification and melting system is the representative process which can transfer waste to resources such as syn-gas, molten slag, metal hydroxide, mixed salt and sulfur through the process of compaction, pyrolysis, gasification and melting.

• Environmental Analysis Health and Toxicology
• /
• 제16권2호
• /
• pp.103-114
• /
• 2001

Worldwide trend of waste treatment technology is rapidly transferring from "incineration system" to "gasification & melting system" which can derive the resources from waste and charge no more environmental burden to nature. And therefore it is necessary for our country to adopt gasification & melting system urgently to present the land pollution and lack of landfill area. Among several gasification and melting processes Daewoo-Thermoselect gasification and melting system is the representative process which can transfer waste to resources such as sin-gas, molten slag, metal hydroxide, mixed salt and sulfur through the process of compaction, degasification, gasification and melting.

• 농업과학연구
• /
• 제42권3호
• /
• pp.177-181
• /
• 2015

Food waste has been widely considered as a recycling resource to be applied to agricultural lands due to the effects of organic matter and nutrient for plant productivity. but the maturity and salt concentration in the compost produced from food waste processing facilities should be considered firstly, which was little information on compost quality produced from food waste treatment facility. In this study, we examined actual situation of food waste processing facility on the composting of food waste and evaluated the characteristics of composts produced from food waste processing facilities. The quality of composts was analyzed on the basis of the criteria of fertilizer processing manual. The 46% of food waste treatment facility registered composting produced actually the compost mixed with food waste or animal waste. The compost maturity and salt concentration as indicators of the quality of compost were not met 46.8% of composts collected from food waste processing facilities to the criteria of fertilizer processing manual. Also, 15.6%(moisture) were not satisfied with the criteria. In conclusion, the compost produced from food waste processing facilities is firstly required with better compost maturity and reduced salt concentration in order to use to agricultural lands as an amendment.

• 공학기술논문지
• /
• 제6권2호
• /
• pp.125-129
• /
• 2013

In the pyrochemcial process of spent nuclear fuel, it is necessary to separate rare earth nuclides from LiCl-KCl eutectic waste salt for radioactive waste reduction. This paper presents the phosphorylation of neodymium chloride in LiCl-KCl-NdCl₃ system using Li₃PO₄-K₃PO₄ as a phosphorylation agent in a chemical reactor with pitched blade impellers. The phosphorylation test was performed changing operation temperature, stirring rate, and amount of phosphorylation agent. Neodymium chloride was effectively converted into neodymium phosphate (NdPO₄). It was confirmed that more than 99 wt% of neodymium can be separated from LiCl-KCl-NdCl₃ system using a phosphorylation method l

• 방사성폐기물학회지
• /
• 제17권3호
• /
• pp.279-298
• /
• 2019

사용후핵연료의 효율적 관리를 위하여 한국원자력연구원에서 수행 중인 파이로 공정으로부터 발생되는 폐기물 처리기술에 대한 최근 연구동향을 종합적으로 고찰하였다. 파이로 폐기물 처리기술은 처분 대상 폐기물의 감용 및 포장, 저장과 최종 처분에 적합한 고화체 제조를 목표로 하고 있다. 한국원자력연구원에서 수행 중인 파이로 폐기물 처리 기술개발 접근 방향은 공정 흐름으로부터 발생한 폐기물내 주요 핵종들을 분리하고 회수한 물질 등을 재사용함으로서 폐기물 발생량을 최소로 하며 동시에 분리한 핵종을 별도로 고화처리하는 것이다. 폐기물 처리 주요 기술 특성은 먼저 전해환원용 원료물질 제조를 위하여 전처리 고온 열처리 공정을 사용하며, LiCl 과 LiCl-KCl 염으로부터 핵종을 분리하고 회수염의 재사용 및 핵종 함유량을 증대시킨 최종 고화체 제조 기술을 개발하는 것이다. 따라서 실험실 규모 실험 결과를 토대로 최근에는 공정 용량 증대를 위한 자료 확보를 목적으로 공학규모 시험을 수행 중에 있다.

• Membrane and Water Treatment
• /
• 제10권2호
• /
• pp.139-148
• /
• 2019

In this study, the removal of MB from saline solutions was evaluated by two methods by adsorption and electrodialysis; the adsorption of the mixture dye/salt on dried orange peel waste (OPW) was studied in batch method. In this study the biosorption of cationic dye by OPW was investigated as a function of initial solution pH, and initial salt (sodium chloride) concentration. The maximal dye uptake at $pH{\geq}3.6$ in the absence and in the presence of salt and the dye uptake diminished considerably in the presence of increasing concentrations of salt up to 8 g/L. The Redlich Peterson and Langmuir were the most suitable adsorption models for describing the biosorption equilibrium data of the dye both individually and in salt containing medium. As well, this work deals with the electrodialysis application to remove the dye. Synthetic solutions were used for the investigation of the main operational factors affecting the treatment performance; such as applied voltage, pH, initial dye concentration and ionic strength. The experimental results for adsorption and electrodialysis confirmed the importance of electrostatic interactions on the dye. The electrodialysis process with standard ion exchange membranes enabled efficient desalination of cationic dye solutions; there are two main factors in fouling: electrostatic interaction between cations of dyes and the fixed charged groups of the CEM, and affinity interactions.

• Fisheries and Aquatic Sciences
• /
• 제18권4호
• /
• pp.349-357
• /
• 2015

To reutilize fisheries waste, we isolated a bacterial strain from a coastal area located in Busan. It was identified as Bacillus licheniformis TK3-Y. Using plate assay and 500-mL flask experiments, we found that the isolate simultaneously possessed cellulolytic, proteolytic, and lipolytic activities with salt tolerance. 10% (v/v) inoculums, were used to examine the biodegradation characteristics of the TK3-Y strain on carboxymethylcellulose, skim milk, and olive oil media. The optimum conditions for pH, temperature, agitation speed, and NaCl concentration on each 1% substrate were 6, $50^{\circ}C$, 180 rpm, and 17.5%, respectively. Under optimal conditions, the TK3-Y strain showed 1.07 U/mL cellulolytic, 1,426 U/mL proteolytic, and 6.45 U/mL lipolytic activities. Each enzyme was stable within a range of 17.5-35% NaCl. Therefore, the salt tolerance ability of strain TK3-Y was superior to other related strains. In degradation of a mixed medium containing all three substrates, both the cellulolytic and proteolytic activities were somewhat lower than those on each single substrate, while the lipolytic activity was somewhat higher. From the above results, the TK3-Y strain appears to be a good candidate for use in the efficient treatment of fisheries waste in which components are not collected separately.