• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2018.05a
• /
• pp.301-302
• /
• 2018

• 한국연소학회:학술대회논문집
• /
• 2007.05a
• /
• pp.155-160
• /
• 2007

This study was conducted to find out the chlorine removal characteristics of waste plastic mixture by pyrolysis process with thermogravimetric analysis(TGA) and a lab-scale pyrolyzer. The material used as plastic wastes were PE (Poly-ethylene), PP (Poly-prophylene), and PVC (Poly Vinyl Chloride). Experimental procedure were composed of three steps; 1st step: TGA of PVC, PP and PE, 2nd step: chlorine removal rate of PVC in a lab-scale pyrolyzer, 3rd step: chlorine removal rate of PVC-PE and PVC-PP mixture in a pyrolyzer. Through the results of TGA, we can estimate the basic pyrolysis characteristics of each plastic, and then we can also derive the design parameters and operating conditions of the lab-scale pyrolyzer. The results can be used as primary data for designing a system to produce RPF (Refuse Plastic Fuel), a waste incinerator and a pyrolysis/gasification process.

• The Microorganisms and Industry
• /
• v.19 no.4
• /
• pp.2-13
• /
• 1993

Some microorganisms, including actinomycetes, cyanobacteria, and other bacteria, algae, fungi, and yeast, can accumulate and retain relatively high quantities of heavy metals and radionuclides from their external environments (1-4). Both living and dead cells can be used for biosorptive metal/radionuclide removal from solution. Thus microorganisms and products excreted by or derived from microbial cells (2) may provide an alternative or adjunct to conventional techniuqes of metal removal and recovery. Recent approaches have separated the microbial growth and metal removal process to manipulate production of metal-adsorptive capacity of bacteria and metal removal process. If pre-grown cells are immobilized and used for metal removal, mathematical modeling can be applied to predict immobilized cell reactor behavior under specific process conditions. Waste and microbial adsorbent could be separated from the treated flow in one step. Once treated, the metal waste is concentrated in a small volume of sorbed form for easy metal disposal or recovery.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.4
• /
• pp.597-603
• /
• 1999

Even though the development of livestock industry in Asia and Australasia has brought the economic growth and thus elevated the living standard in these areas, it has also brought the pollution caused by the increasing amount of animal wastes. Among them, Japan probably is the first country that suffered from the animal waste pollution as early as in 1970s. Nowadays, the animal waste pollution has been a common problem for almost every countries in this region. To solve it, different measures and regulations have been implemented in many countries. In this paper, different methods for animal waste disposal are discussed, including: manure-bed animal housing, composting, anaerobic treatment, odor control, utilization of biogas, aerobic treatment, three-step process, N and P removal, land application, cultivation of algae, anaerobic treatment of dead animals. It is hoped that an animal industry without pollution can be achieved in the future.

• The Korean Journal of Ecology
• /
• v.12 no.2
• /
• pp.75-82
• /
• 1989

Bacterial strains which have excellent removal capacity of phosphate or reduction capacity of were isolated from waste water. Among isolated strains. WR8 and WR1 strains were showed goood efficiency in removal of phosphate and reduction of respectively. When each strain was cultivated in waste water, WR8 strain removed about 85% of phosphate and WR1 strain reduced about 85% of -N. By the result of investigation of morphological and physiological characteristics, WR8 was identified as Aeromonas hydrophila and WR1 as Klebsiella pneumoniae.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.628-632
• /
• 2001

The removal rate of Cl from municipal solid waste incineration(MSWI) ash(bottom ash and fly ash) by washing was investigated. The Cl contents in the bottom ash and fly ash were 2.6-3.0% and 25-30% respectively, and KCl, NaCl, CaCIOH and friedel's salt were main components. From the results on the effects of washing time and temperature, the Cl contents in the bottom ash and fly ash were decreased up to 0.3% and 2.0% respectively by using of water as a solvent within 30 min at 2$0^{\circ}C$, 300 rpm of agitation speed and 10 of liquid/solid ratio. It is expected that the removal of Cl from the incineration ash by washing could make use of the ash for a cement raw material and so on.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.2
• /
• pp.68-74
• /
• 2004

A blast furnace slag(BFS) has been used as a filter medium for the treatment of domestic waste waters during the period of 9-month. More than 90% of phosphorus was removed while the hardness of the treated water increased by 5 times and the pH was significantly raised from 6.8 to 10.8. The high hardness and pH of the treated water indicated dissolution of BSF by the sewage. The experimental results suggest that BFS could be utilized for the removal of phosphorus in the waste water treatment plant using aquatic plants and gravels.

• Environmental Engineering Research
• /
• v.13 no.3
• /
• pp.155-161
• /
• 2008

This study examined effects of the fermented leachate of food waste (FLFW) on nitrogen and phosphorous removal for domestic wastewater containing a low carbon-to-nitrogen (C/N) ratio in sequencing batch reactor (SBR). When the FLFW was not supplied in the process, release of phosphorus and excessive intake was not observed at both anaerobic and aerobic stages. On the other hand, when the FLFW was gradually added, active release of phosphorus and intake of phosphorus was noticed at an anaerobic stage and aerobic stage, respectively, resulting in improved phosphorus removal efficiency. The removal efficiency of nitrogen and phosphorus was increased from 75% and 37% (R-1, control test) to 97% and 80% (R-4, the highest substrate ratio test), respectively. In addition, although activity of the nitrogen oxidizing microorganisms was reduced when the reaction temperature was decreased to $10^{\circ}C$, the phosphorus removal efficiency was shown to increase with the addition of FLFW, indicating an independence from temperature. Overall, this study suggests that an efficient nutrients removal process can be successfully employed into a SBR when the FLFW is added to a wastewater which has a low C/N ratio.

• Clean Technology
• /
• v.3 no.1
• /
• pp.96-105
• /
• 1997

The objectives of this study were to investigate $SO_2$ removal efficiency of anthracite - bituminous coal blend combustion in a fludized bed coal combustor with Ca/S, anthracite ratio, bed temperature, and waste paper sludge particle size. The experimental results were presented as follow ; the effect of the desulfurization by the particle size of waste paper sludge was a great and $SO_2$ removal efficiency was heigest in paper sludge dia $1016{\mu}m$. And the difference of $SO_2$ removal efficiency according to air velocity was not too large. As Ca/S mole ratio incresed, $SO_2$ removal efficiency incresed rapidly up to Ca/S mole ratio 3 while the desulfurization rates did not increse too largely in the range of more than the level. The bed temperature had a great deal of effect on the desulfurization rate. So the $SO_2$ removal efficiency was a graet using waste paper sludge that the properbility of paper sludge as sorbent was conformed.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.6
• /
• pp.429-433
• /
• 2014

The objective of this study was to find optimum amount of bamboo smoke distillate (BSD) and reaction time (RT) for ammonia removal in food waste compost (FWC). BSD amount (30 to 90 mL BSD/600 g FWC) and RT (1 to 3 h) significantly affected the ammonia removal in FWC. Within the design boundaries, the optimum conditions for maximum ammonia removal (8.47 ppm $NH_3$/600g FWC) were 74 mL BSD/600 g FWC (0.123 mL BSD/g FWC) and 3 h RT. The BSD was effective on ammonia removal in FWC, rather than vinegar (p < 0.05). Our results proved a good potential of BSD to serve as an alternative deodorant for FWC.