• 한국환경보건학회지
• /
• 제31권4호
• /
• pp.294-300
• /
• 2005

Food waste can be a valuable carbon source in biological nutrient removal (BNR) systems because of high C/N and C/P ratios. However, food waste should be pretreated to promote its hydrolysis rate because hydrolysis reaction would be a rate-limiting step. This study investigates the influence of the enzymatic pretreatment on acid fermentation of food waste. Solubilization of particulate matter in food waste by using commercial enzymes was examined. The acidification efficiency and the volatile fatty acids (VFAs) production potential of enzymatically pretreated food waste were also examined. The highest volatile suspended solids (VSS) reduction was obtained with an enzyme mixture ratio of 1:2:1 of carbohydrase:protease:lipase. An optimum enzyme dosage for solubilization of food waste was $0.1\%$(V/V) with the enzyme mixture ratio of 1:2:1. In the acid fermentation of enzymatically pretreated food waste, $0.1\%$(V/V) enzyme mixture dosage for pretreatment result in the maximum VFAs production and the best VFAs fraction in soluble COD(SCOD). The VFAs production at this addition level was 3.3 times higher than that of no-enzyme added fermenter. The dominant VFAs present was n-butyrate followed by acetate.

• Nuclear Engineering and Technology
• /
• 제39권6호
• /
• pp.683-690
• /
• 2007

Because of increasing concerns regarding global warming and the longevity of oil and gas reserves, the importance of nuclear energy as a major source of sustainable energy is gaining recognition worldwide. To make nuclear energy truly sustainable, it is necessary to ensure not only the sustainability of the fuel supply but also the sustained availability of waste repositories, especially those for high-level radioactive waste (HLW). From this perspective, the effort to maximize the waste loading density in a given repository is important for easing repository capacity problems. In most cases, the loading of a repository is controlled by the decay heat of the emplaced waste. In this paper, a comparison of the decay heat characteristics of HLW is made among the various fuel cycle options. It is suggested that, for a future fast breeder reactor (FBR) cycle, the removal and burning of minor actinides (MA) would significantly reduce the heat load in waste and would allow for a reduction of repository size by half.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 총회 및 춘계학술발표회
• /
• pp.209-212
• /
• 2002

Main radionuclides of the soil waste stored in Korea Atomic Energy Research Institute are Co-60 and Cs-137. Moisture content of soil is 12%, pH of soil is 5.8, and content of organic matter is 2.2 %. Radioactive concentrations of the soil particle size of which is less than 0.063mm and soil in the drum surface of which is more than radiation dose rate 0.05mR/hr are higher. Meanwhile, radioactive concentration of soil in the drum surface of which is less than radiation dose rate 0.02 mR/hr are mostly lower. On using the mixing solution of ammonium sulfate and citric acid, 62% Co was removed from soil and 41% Cs was removed. Also, on using the mixing solution of ammonium nitrate and citric acid, 61% Co was removed from soil and 39% Cs was removed, and on using the mixing solution of ammonium potassium oxalate, 36% Co was removed and only 3% Cs was removed. And on using only water, removal efficiency is less than 5%.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 Proceedings of the 4th Korea-China Joint Workshop on Nuclear Waste Management
• /
• pp.96-105
• /
• 2004

The decommissioning project of the KRR 1 & 2 was started in January 1997. The actual decommissioning activity was started at the RI production facility and was finished at the end of 2002. The dismantling works of all components including the reactor structure of the KRR-2 was started in January, 2003 and will be carried out for 2 years till the end of 2004. The project schedule is estimated to delay for 4∼5 months beyond the original plan because of delaying on the cutting of thermal column nose and removal of the graphite bricks, but it may be caught up during the removal working of concrete from biological shielding structure. This paper summarizes the general status of the KRR 1 & 2 and decommissioning activities.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 1998년도 공동 심포지엄 및 추계학술발표회
• /
• pp.48-51
• /
• 1998

This paper presents the transport and removal of organic substances from the contaminated soft soils and sludges such as marine dredging waste, marine sediments, mine tailing waste, and sewage sludge by electroosmosis. A series of laboratory experiments including variable conditions such as contamination levels, solid contents, and applied voltage rates were peformed with the contaminated soft clay specimen mixed with organic substance. Investigated are specimen density, dewatering rate, outflow rate, and outflow concentration. The test results showed that organic substances in the soils were removed by applied voltages. The results indicated that this process can be used efficiently to clean up the contaminated soil.

• 펄프종이기술
• /
• 제36권1호
• /
• pp.30-36
• /
• 2004

Waste papers(MOW and ONP) were deinked with alkaline cellulolytic enzyme from Coprinus cinereus 2249. The effectiveness of alkaline enzyme on sticky contaminant removal and bleaching of recycling pulp was investigated. The conclusions obtained from the results are as follows. The brightness of deinked pulps MOW and ONP was most high in 0.4IU enzyme treatment. \circled2 The removal effect of sticky contaminant was enhanced with alkaline cellulolytic enzyme treatment. Bleaching with sodium hydrosulfite was most effective in one and two stage bleaching after enzyme treatment of mixed wastepaper of MOW and colored paper. \circled4 The brightness of alkaline enzyme deinked ONP was increased 20％ with $H_2O$$_2$ bleaching.

• 대한핵의학회지
• /
• 제7권1호
• /
• pp.51-54
• /
• 1973

The use of ion-exchange resins for the treatment of radioactive wastes has many advantages, but thes eare rather expensive as compared with the Korean vermiculite. The Korean vermiculite has slightly different chemical constituents from the ones produced in other countries, and its physical properties might be applicable to the management of radioactive waste, in a small nuclear installation. The decontaminating effect of Korean vermiculite for the low-level radioactive liquid was investigated. $^{106}Ru,\;^{90}Sr,\;and\;^{137}Cs$ were utilized for the experiments. The removal rates by Korean vermiculite were calculated for $^{106}Ru,\;^{90}Sr\;and\;^{137}Cs$ and the removal rates increased as the weight of vermiculite in the exchange column increased. The decontaminating constants, $K_d$ of the Korean vermiculite for $^{106}Ru,\;^{90}Sr\;and\;^{137}Cs$ were 2.7, 69.3 and 263ml/g respectively. Through the results of experiments, the application of Korean vermiculite column to the treatment of low-level radioactive waste is quite feasible.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 Proceedings of The 6th korea-china joint workshop on nuclear waste management
• /
• pp.214-221
• /
• 2005

Spent ion-exchanged resin generated from various purification systems in CANDU reactor is causing concern due to a limited storage capacity and safe disposal. As a suggestion for a proper treatment technology for the spent ion-exchanged resin containing a high activity of C­14 radionuclide which would be classified as Class A and C wastes, a fundamental study for the development of C-14 removal technology from a spent resin was performed. The adsorption characteristics of the inactive $HCO_3^-$ ion and other ions in a stripping solution on IRN-150 mixed resin was evaluated and the removal technology of the $HCO_3^-$ ion adsorbed on IRN-150 by an alkaline stripping method was proposed.

• 반도체디스플레이기술학회지
• /
• 제16권3호
• /
• pp.20-24
• /
• 2017

For process improvement and cutting down on expenses in solar cell industry, it is necessary to improve recycling process of wafer manufacturing. In this research, a study is introduced to develop classifier which is for recycling of abrasive. First of all, recycling process of wafer manufacturing is analyzed. And then, 3 steps of experiments such as oil removal, impurities removal and classification were executed. For the classification of slurry, a classifier is designed and manufactured. From experiments, it is verified that ultra sound vibration and flux are very important factors for classification. By experiencing the recycling processes and making devices, the technique can be initiated industry if needed such as decreasing waste and cutting down on expenses.

• Korean Journal of Chemical Engineering
• /
• 제35권11호
• /
• pp.2303-2312
• /
• 2018

Pretreatment process of silica-coated PET fabrics, a major low-grade PET waste, was developed using the reaction with NaOH solution. By destroying the structure of silica coating layer, impurities such as silica and pigment dyes could be removed. The removal of impurity was confirmed by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDX). The pretreated PET fabric samples were used for depolymerization into its monomer, bis(2-hydroxylethyl) terephthalate (BHET), by glycolysis with ethylene glycol (EG), and zinc acetate (ZnAc) catalyst. The quality of BHET was confirmed by DSC, TGA, HPLC and NMR analyses. The highest BHET yield of 89.23% was obtained from pretreated PET fabrics, while glycolysis with raw PET fabric yielded 85.43%. The BHET yield from untreated silica-coated PET fabrics was 60.39%. The pretreatment process enhances the monomer yield by the removal of impurity and also improves the quality of the monomer.