• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.383-388
• /
• 2019

The present study evaluated experimentally the effects of the type and content of plastic fine aggregates on cement mortar in order to utilize waste platics as raw materials of concrete. The two kinds of plastics, LLDPE and HDPE were used, and the mixing rate of plastic fine aggregates was increased 0, 25, 50, 75, 100%. The mortar of LLDPE fine aggregate and HDPE fine aggregate showed similar tendency in flow and material separation resistance, density and water absorption, compressive strength and flexural strength by age. The flowability of mortar mixed with plastic fine aggregates was increased up to 50% but decreased at 75% or more. The material separation resistance of mortar with plastic fine aggregates was also dramatically decreased. On the other hand, due to the low density of plastics, the density of mortar decreased with the mixing of plastic fine aggregates. Due to the low adhesion between plastic fine aggregates and cement, the compressive strength by age was decreased in proportion to the mixing ratio of plastic aggregate, but the flexural strength of each age decreased with maintaining a certain level at 50% or more of plastic fine aggregate content.

• The Korean Journal of Vision Science
• /
• v.20 no.4
• /
• pp.553-560
• /
• 2018

Purpose : To investigate a disposal method of disposing contact lenses and the recognition of environmental pollution by micro plastics which may be caused by the wrong disposal method of domestic contact lens wearers. Methods : Two hundred sixty one adults(124 males, 137 females, mean age $21.48{\pm}3.14years$) were participated in this study. They were given the questionnaire survey on contact lenses purchasing place, type of contact lenses, duration of wearing contact lenses, the disposal method of disposing contact lenses and the recognition of the occurrence of environmental pollution. Results : It appeared that eyeglass shop(50.0%) and contact lens shop(48.3%) were the main purchasing places, and the most common type of contact lenses were disposable lenses(38.5%) and daily wearing lenses(52.5%). On the duration of wearing contact lenses they answered more than 5 years(29.3%), less than 1 year (26.0%), less than 1 year to less than 3 years (26.0%), and on wearing a contact lens during a week they did 1-2 days (32.0%), 1 week (28.0%), 5-6 days (22.4%) and 3-4 days (17.6%). It was shown "no(78.3%)" and "yes(21.7%)" to the questionnaire of whether they received information or education about a disposal method at the place where the contact lens was purchased, and "no(87.5%)" and "yes(12.5%)" to the questionnaire of whether they received information or education from schools, public institutions or public media such as the internet. As for the disposal methods, landfill waste(45.6%), recycled garbage(29.6%), and drainage(16.8%) from the sink or toilet responded in order. Although men were more educated and informed about disposal than women (t=3.63189, p<0.00001), women were more aware of environmental pollution(t=2.44269, p=0.01605). Conclusion : In order to reduce the environmental pollution issue caused by the contact lens which does not decompose at the sewage treatment facility and become micro plastics, it is urgent to provide information about correct disposal methods after using contact lenses and to educate contact lens wearers.

• Journal of environmental and Sanitary engineering
• /
• v.20 no.1 s.55
• /
• pp.1-11
• /
• 2005

This research was performed to investigate the generation and physico-chemical characteristics of municipal solid wastes in the east coast of gangwon. The results were as follows: i) The generation rate of G city and Y gun were 0.187-0.384 $\cal{kg/cap/d}$ and 0.136-0.259 $\cal{kg/cap/d}$. Apparent density of G city and Y gun were 137.9-191.9 g/L and 157.3-238.3 g/L, respectively. ii) The wastes consisted of $76.1-97.5\%$ of combustibles and $2.5-23.9\%$ of incombustibles in G city. And the wastes consisted of $73.7-98.6\%$ of combustibles and $1.4-26.3\%$ of incombustibles in Y gun. Most of municipal solid wastes are composed of food, paper, and vinyl-plastics waste. Water content of commercial area, agricultural resident, detached resident, apartment area, school zone were 42.5-45.9, 37.6-43.4, 32.4-38.4, 29.3-32.3, $6.8-26.9\%$, respectively. iii) The low heating value of G city and Y gun were 1,125.5-2,540.7 $\cal{kcal/kg}$, 1,104.4-2,062.3 $\cal{kcal/kg}$, and school and apartment area were higher than commercial area.

• Resources Recycling
• /
• v.24 no.1
• /
• pp.43-50
• /
• 2015

An extensive literature survey and personal communication with relevant experts made it possible to understand economic and technical feasibility of disposable diaper recycling. Commercial level of soiled diaper recycling technology is currently available from a Dutch company, Knowaste Co., who owns a proprietary separation technology of the pulps, plastics and super absorbing polymer (SAP). In Korea, on the other hand, pre-consumer diaper recycling technology without material separation at its infancy converts manufacturing scraps into refuse plastic fuel (RPF), container/truck cargo boards or automobile boards/sheets. Although previous studies on feasibility of post-consumer recycling in Korea showed mutually contradictory implication, it was found out in this research that significantly positive economic feasibility can be obtained with pre-consumer diaper recycling. Subsequent recycling R&D including pre-consumer scrap and policy support may expedite 'Establishment of Sustainable Society.

• Resources Recycling
• /
• v.24 no.5
• /
• pp.22-32
• /
• 2015

This study aims to discuss the concept of upcycling as it applies to diaper recycling. Upcycling is the process of converting waste materials into new products of better quality. Through benchmarking of upcycling examples, useless objects can be transformed into valuable materials. However, current upcycling examples determine value creation related to qualitative elements, so that it is difficult to establish any quantitative strategy of upcycled products. Therefore, this study expands a B2B (Business to business) product for improving market availability and establishes a direction using both recovered pulp and mixed plastic at the same time. As a result, the upcycling method for recovered pulp and mixed plastics, is the application of a cellulose insulator. Within the near future, the high quality insulator market will grow more than three times. An upcycling strategy targeting the high quality insulator market needs to be established.

• Hwankyungkyoyuk
• /
• v.19 no.2 s.30
• /
• pp.81-95
• /
• 2006

School is an excellent place for children to loam environment-conscious behavior and for teachers to bring up environmental education. School has a plenty of teaching materials such as school building, pond, school forest, waste and school supplies. Especially, the environmental education for and with school supplies can be very effective, as it is mostly the first products for children to learn the buying and consumption in their daily life. In this study we conducted a survey on the environmental attitude of two groups of 5th graders towards environmentally friendly school supplies. The experimental group received environmental education on school supplies and the control group did not. The survey results showed that almost 50% of the children did not consider the environmental impact, but rather the price, design and function when buying the school supplies. However, more than 70% of children were willing to use the recycled school products, implying that they are aware of environmental Issues and want to contribute to the preservation and improvement of the environment. The children recognized paper/notebooks and paints/crayons as the major environmental problems. Writing appliances such as pens, pencils, highlighters and markers were also considered as environmental concerns, since most of them are made of plastics and they are not easily biodegradable nor refillable. We also exemplify a lesson-plan for environmental education program on school supplies and make suggestions to encourage the use of those eco-friendly school materials.

• Journal of Energy Engineering
• /
• v.7 no.1
• /
• pp.57-64
• /
• 1998

A neutralized fabric filter of which major raw materials were polyester and stainless steel fibers was developed and its physiochemical properties and basic filter characteristics were investigated. Four finds of dusts generated in the typical domestic industry were used, which were coke dust from a steel manufacturing process, cement dust from a cement manufacturing process, flu ash from a fluidized-bed combustor, and incinerator ash from a waste plastics incinerator. The physicochemical properties of the neutralized fabric filter were analyzed in terms of changes in tensile strength and initial elastic modulus under $SO_2$ and $NO_2$ atmospheres, mean flow pore pressure, bubble point pore diameter, mean flow pore diameter, and pore size distribution. In addition, the pressure drop, dust penetration, and figure of merit for the fabric filter were investigated in a bench-scale filter testing unit. The pressure drop increased as the filtration velocity and dust loading increased, and its increasing shape depended on the type of dust. The dust penetration rapidly decreased as the dust loading increased irrespective of the type of dust. The figures of merit for the fabric filters increased in the early stage of filtration and then showed rapid decreases followed maintaining a constant level.

• Journal of Energy Engineering
• /
• v.7 no.1
• /
• pp.103-112
• /
• 1998

A high temperature fabric filter was developed and characterized in order to solve the various problems encountered in the operation of industrial fabric filters. Four kinds of dusts generated in the typical domestic industry were used for its characterization, coke dust from a steel manufacturing process, cement dust from a cement manufacturing process, fly ash from a fluidized-bed combustor, and incinerator ash from a waste plastics incinerator. The physical and chemical properties of the high temperature fabric filter were analyzed in terms of mean flow pore pressure, bubble point pore diameter, mean flow pore diameter, pore size distribution, and the changes in tensile strength and initial elastic modulus under $SO_2$ and $NO_2$ atmospheres. Pressure drop, dust penetration, and figure of merit for the fabric filter were also investigated in a bench-scale filter testing unit. The fabric filter developed in this study had good physical and chemical filter properties and showed a very applicability to typical industrial dusts treatments.

• Analytical Science and Technology
• /
• v.18 no.3
• /
• pp.206-215
• /
• 2005

Polychlorinated biphenyls (PCBs) were commercially produced as complex mixtures beginning in 1929. The PCBs manufactured commercially are known by a variety of trade names including; Aroclor (USA), Phenoclor (France), Kaneclor (Japan), Sovol (USSR) and so on. PCBs are a class of 209 congeners that were widely used in a wide variety of applications, including dielectric fluid in transformers and large capacitors; heat transfer fluids; hydraulic fluids; lubricating and cutting oils; and as additives in pesticides, paints, adhesives, sealants, and plastics. The quantification methods of peak matching and coefficient comparison were compared using the Aroclor 1242, 1248, 1254, 1260 standards. Also, six transformer oils were analyzed as a main source of polychlorinated biphenyls (PCBs) emission into the environment. The transformer oils contained the pure and mixed of Aroclor 1242, Aroclor 1254, and Aroclor 1260. The analytical results using two quantification methods showed the little difference between the measured results.

• Journal of Adhesion and Interface
• /
• v.20 no.4
• /
• pp.140-145
• /
• 2019

In view of environmental considerations, the control of carbon dioxide (CO₂) and volatile organic compounds (VOCs) is one of important issues in the film and coating industries. Therefore, UV-curable system has been developed due to minimize emissions of VOCs and reduce CO₂ emission due to low energy consumption from fast curing. Also, biodegradable polymers economically are attractive because of environmental and economic concerns associated with huge waste plastics. In this study, UV-curable polyurethane acrylates with different compositions of biodegradable polylactide (PLA) diol and poly(ethylene glycol) as diols were synthesized and curing reaction of their end-capped acrylates was performed by UV exposure. Tensile strength, elongation, and Tg of the UV-cured polyurethane acrylates increased with PLA diol content in the diol while their hydrophilicity and thermal stability increased with the PEG content. These results indicated a property of UV-cured polyurethane acrylates could be controlled by environment-friendly diols.