• Environmental engineer
• /
• v.18 s.188
• /
• pp.52-57
• /
• 2002

• Environmental engineer
• /
• v.20 s.187
• /
• pp.42-47
• /
• 2002

• New & Renewable Energy
• /
• v.16 no.2
• /
• pp.47-53
• /
• 2020

The amount of food waste and its water content depends on both the season and region. In particular, the water content typically varies between 73.8 wt.% and 83.3 wt.%, depending on the proportion of vegetables. Current food waste drying technologies are capable of reducing the water content to less than 10 wt.%, while increasing the heating value. Ongoing studies aim to utilize dried food waste as fuel. Food waste can be used to produce solid refuse fuel (SRF) by mixing it with various solid fuels or other types of waste. The analysis of specimens is very important when considering the direct combustion of food waste or its co-firing with solid fuels. In this study, the weight reduction of specimens after burning them in a small combustor, and compared with the results of thermogravimetric analysis (TGA). The concentration of various chemicals was also measured to define the characteristics of waste generation. Performed proximate analysis, elemental analysis, TGA, combustion experiment, the heating value, and derivative thermogravimetry (DTG).

• Journal of the East Asian Society of Dietary Life
• /
• v.25 no.4
• /
• pp.710-719
• /
• 2015

This study was undertaken to identify factors affecting school food waste generation using a questionnaire. The subjects were 254 high school students (male; 156, female; 98) in Sacheon, Gyeongnam divided into three groups of low (${\leq}1/week$), moderate (2~3/week), and high (${\geq}4/week$) according to the frequencies of food waste. The questionnaires consisted of general characteristics, anthropometric values, dietary habits, health-related behaviors, self-perceptions of food waste, snacking patterns, and nutrition knowledge. The main reasons behind food waste were 'too much food' in the low (20.9%) and moderate (32.2%) groups, and 'no appetite' in the high group (p<0.01). The main types of food waste were rice (44.2%) > fish (18.6%) > vegetables (14.0%) in the low group, rice (54.2%) > Kimchi/vegetables (15.3%) in the moderate group, rice (56.0%) > vegetables (20.0%) > Kimchi (16.0%) in the high group (p<0.01). School food waste was significantly affected by age, gender, monthly allowance, school grade, weight, BMI, regularity of meals, time of meals, type of breakfast, starting age of smoking, and cost for snacking.

• KIEAE Journal
• /
• v.10 no.5
• /
• pp.181-186
• /
• 2010

Research on construction waste unit was in progress in the 1995 when 'Proper Disposal and Recycling Measures for Construction Waste' was made by the Seoul Development Institute. Such an effort has been made in order to cope with the lack of natural resources in Korea and to utilize the reusable resources. Furthermore, these efforts have also increased due to the improved standing of Korea in the international community. A large number of residential buildings were built in the response to the government's policy by increasing the supply of houses between the 1970's and 1980's. In 2000, more reconstruction and redevelopment was done because of the aged buildings and change of use for those buildings. And the project has been actively promoted until now, which caused a sharp increase in the generation volume of construction waste. In Korea, 8 kinds of construction waste unit, including the standard construction manpower and materials estimation, are introduced. Currently, they provide standards to different building categories and waste properties while for construction sites different standards are applied. This study aims to measure the actual amount of construction waste after sample buildings are dismantled and analyzes the estimation of the waste quantity by using various standard units. Through comparison, this study will figure out the differences among the standard units in order to find out how to apply the standard units properly. Moreover, this research will provide practical measures to apply such units to construction sites.

• Advances in environmental research
• /
• v.12 no.1
• /
• pp.41-49
• /
• 2023

In developing countries, solid waste is typically disposed of inappropriately, which has a negative impact on the environment and healthcare. One of the most serious environmental issues is the management of municipal solid waste because of the huge increase in waste generation brought on by industrialization, economic development, urbanization, and the exponential growth of Gurugram City's population. Municipal Corporation Gurugram (MCG) handles solid waste collection, transportation, and disposal. The city generates over 1100 tons of solid waste per day. In consideration of this, the current study employed the strengths, weaknesses, opportunities, and threats framework called SWOT analysis to critically examine the city's current methods for the management of municipal solid waste to provide more effective policy solutions. For conducting the analysis, the questionnaires and other interviews were conducted to gather information from households and officials in the city, and the observation made during field visits were recorded. The analysis shows that the waste management issue is getting worse for a variety of causes, including a lack of regulatory enforcement, insufficient technical and financial resources, insufficient people's participation, inadequate execution of policies, a lack of political priorities, and poor coordination between authorities.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.219-220
• /
• 2021

It is considered that the construction industry is one of the pivotal players in the national economy in terms of Gross Domestic Production (GDP) and employment. Behind the positive role of this industrial sector to the national economy, the construction industry generates approximately 50 % of the total waste generation from all the industrial sectors. There are several measures to mitigate the adverse impacts of the construction waste such as reduce, reuse and recycle. Recycling would be one of the effective strategies for waste minimisation, which would be able to reduce the demand upon new resources as well as enhance reusing the construction materials on sites. The automated construction waste classification system would make it possible not only to reduce the amount of labour input but also mitigate the possibility of errors during the manual classification process. In this study, we proposed an automated waste segmentation and classification system for recycling the construction and demolition waste in the real construction site context. Since the practical application to the real-world construction sites was one of the significant factors to develop the system, a YOLACT (You Only Look At CoefficienTs) algorithm was chosen to conduct the study. In this study, it is expected that the proposed system would make it possible to enhance the productivity as well as the cost efficiency by reducing the manpower for the construction and demolition waste management at the construction site.

• Resources Recycling
• /
• v.20 no.5
• /
• pp.16-33
• /
• 2011

Waste electrical and electronic equipment(WEEE or E-waste) is one of the fastest growing waste stream in Korea. The proper management of such equipment has become of major concern for solid waste professionals because of the large growth of the waste stream and the presence of a myriad of toxic materials with in it. In this paper in order to review the recycling system and recycling industries of the E-waste in Korea, the main frame concerning recycling of "Act on the Resources Recycling of Waste Electrical Electronic Equipment(WEEE) and End-of-life vehicles", recycling system, current recycling status, estimation of the E-waste generation, material flow of the E-waste, economics of PCB and recycling industries of the E-waste were surveyed.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.2
• /
• pp.51-58
• /
• 2016

In the Integrated Two-Phase Anaerobic Digestion (ITPAD) process, acid and methane fermentation take place in one reactor, which has advantages to cope with organic load variation and reduce foot-print required, compensating disadvantages of Conventional Separated Two-Phase Anaerobic Digestion (CSTPAD). In the present work, organic matter degradation efficiency and biogas generation amount and other performance parameters of the ITPAD fed with food waste leachate were analyzed. In addition, feasibility study on the ITPAD method was performed by comparing its digestion efficiency with that of the CSTPAD. Organic matter alteration and biogas generation of the integrated method were examined for approximately 130 days based on the 5ton/day scaled pilot plant. Experiment results revealed that organic matter removal rate was 80% for mean food waste leachate input amount of $4.1m^3/day$. The biogas generation rate was $63.0m^3$ per ton of food waste leachate input, corresponding to the input VS amount of $0.724m^3/kg-VS_{added}$, and methane content of generated biogas was approximately 61.3%. The ITPAD has a comparable or higher organic matter removal efficiency compared to the conventional separated two-phase anaerobic digestion method. Consequently, the ITPAD method has a great need to commercialize a food waste leachate treatment technology against highly concentrated organic waste leachate.

• Journal of Korean Society on Water Environment
• /
• v.38 no.2
• /
• pp.95-102
• /
• 2022

Studies for improving the efficiency of the traditional anaerobic digestion process are being actively conducted. To improve anaerobic digestion efficiency, this study tried to derive the optimal pretreatment conditions and mixing conditions by integrating the heat solubilization pretreatment of sewage sludge, livestock manure, and food waste. The soluble chemical oxygen demand (SCOD) increase rate of sewage sludge before and after heat solubilization pretreatment showed an increased rate of 224.7% compared to the control group at 170℃ and 25 min and showed the most stable increase rate. As a result of the biomethane potential test of sewage sludge before and after heat solubilization pretreatment, the total chemical oxygen demand (TCOD) and SCOD removal rates increased as the heat solubilization temperature increased, but did not increase further at temperatures above 170℃. In the case of methane generation, there was no significant change in the cumulative methane generation from 0.134 to 0.203 Sm³-CH₄/kg-COD at 170℃ for 15 min. As a result of the integrated digestion of organic waste, the experimental condition in which 25% of the sewage sludge, 50% of the food waste, and 25% of the livestock manure were mixed showed the highest methane production of 0.3015 m³-CH₄/kg-COD, confirming that it was the optimal mixing ratio condition. In addition, under experimental conditions mixed with all three substrates, M4 conditions mixed with 25% sewage sludge, 50% food waste, and 25% livestock manure showed the highest methane generation at 0.2692 Sm³-CH₄/kg-COD.