• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.571-573
• /
• 2008

Conventional drum washing machine is divided by amount of laundry on 3 step. Because that, this method is arisen in case of washing smaller amount of laundry than each weight during same time. In other words, power is wasted by unnecessary washing time. In this paper, exact quantity of laundry is obtained by using inertia estimator considering features of drum washing machine, unnecessary washing time is decreased by selection proper washing time, thus the algorithm that increase efficiency by reducing power consumption is proposed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1990.10a
• /
• pp.71-77
• /
• 1990

This paper describes the experimental analysis of the vibration and noise reduction for the washing machine of the home appliances. For the washing machine, the customers always feel electrical and mechanical noise and vibration. First of all, when the dehydration process is working, the washing machine has nonlinear problems and boundary conditions are varied with time. Therefore these problems are very complicated and difficult to analyze. We verify the sources of the noise and vibration and consider the countermeasure to reduce the noise and vibration level of the washing machine.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1642-1647
• /
• 2003

The market of the horizontal axis washing machine (drum washing machine) has been growing drastically in Korea by about 80% annually since 2000. As market grows fast, the customerTs demands concerning quality becomes more strict and various. Imbalance sensing is a key technology to reduce the NVH problem in a washing machine, because the laundry is time-variant and uncontrollable source of imbalance, which can cause more than 200kgf exciting force. In this paper, imbalance-sensing methods are briefly reviewed, new acceleration sensing circuits are examined, and finally the control algorithm of spinning process is proposed and validated.

• The Journal of Korea Robotics Society
• /
• v.12 no.1
• /
• pp.19-25
• /
• 2017

A design methodology for parametric design optimization of washing machine door is presented. We develop a motion simulator and a robotic door to simulate the various motion of washing machine doors. The motion of the washing machine door is related to hinge parameters. Springs and dampers are usually used in the hinge of washing machine door for controlling motion of the door. A physical simulator of the door motion is used for finding candidate parameters of the hinge and a robotic door whose motion is controlled algorithmically is used for consumer tests. Through the consumer evaluation on the robotic motion, the optimized parameters are determined. We find the optimal parameters as a function of angle and angular velocity of the door.

• Archives of design research
• /
• v.15 no.4
• /
• pp.369-378
• /
• 2002

The washing and cleaning the clothing has been considered one of the hardest task of house chores to house wife. It is still big drudgery of house keeping in the so-called high tech society. General statistics says the efforts for better washing condition has developed in minimal. It is hard task as it was before. This study is focusing the appliances for the labor reduction have developed favorably to work more effectively. In the context of home mechanization, it is very important to explore the process of the invent, development and design of washing machine. Another point of view for the washing machine is that it is one of the household artifacts, and we witness a specific character by analyzing how it was evolved. Research shows the invention, innovation, improvement and modification of the washing machine by areas and companies such as Miele and Maytag, where present established washing machine manufacturers around on Europe and USA.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.485-491
• /
• 2012

Due to increase in production of the domestic textile industry, energy consumption in textile industry is still growing. Traditional dyeing machine has high temperature and pressure. Accordingly, it uses an indirect cooling system that utilize a heat exchanger to cool after the dyeing. However, this indirect cooling system consumes a great deal of water, takes prolonged periods of time to process and, most importantly, because of the condensing of the dye at the cooling stage requires further energy in reduction cleaning and washing process. Therefore, in this paper, we propose a direct cooling washing machine that replaces the traditional indirect cooling system to provide coolant into the dyeing machine. The newly proposed direct cooling washing machine will still use parts of the traditional dying but will be able to skip the cooling as well as the reduction cleaning and washing process, resulting in less processing time and lower energy consumption. Also, we made a prototype. The prototype was applied to dyeing machine to test the direct cooling washing machine's ability and dyeing property. Additionally, we compared indirect cooling washing machine with direct cooling washing machine about ability, material and energy saving assessment.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.4
• /
• pp.436-443
• /
• 2007

In this paper, an intelligent method called BELBIC (Brain Emotional Learning Based Intelligent Controller) is used to control of Locally Linear Neuro-Fuzzy Model (LOLIMOT) of Washing Machine. The Locally Linear Neuro-Fuzzy Model of Washing Machine is obtained based on previously extracted data. One of the important issues in using BELBIC is its parameters setting. On the other hand, the controller design for Washing Machine is a multi objective problem. Indeed, the two objectives, energy consumption and effectiveness of washing process, are main issues in this problem, and these two objectives are in contrast. Due to these challenges, a Multi Objective Genetic Algorithm is used for tuning the BELBIC parameters. The algorithm provides a set of non-dominated set points rather than a single point, so the designer has the advantage of selecting the desired set point. With considering the proper parameters after using additional assumptions, the simulation results show that this controller with optimal parameters has very good performance and considerable saving in energy consumption.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.1
• /
• pp.54-61
• /
• 2016

Washing machine manufacturers typically advise consumers to maintain the relative humidity in the drum less than 80% for three days after the termination of a washing cycle in order to prevent bacteria proliferation. A vent installed in the back of a washing machine is used to release moisture to satisfy this condition. Up to now, the design and installation of the vent have been based on experiments without understanding its roles and physical phenomena. In this study, various CFD results are presented in order to explain the physical mechanism of moisture release in a washing machine. Two methods of moisture release (diffusion and convection) were studied; diffusion was found to be the dominant process in removing moisture. Experiments were also performed to validate this behavior. In addition, this study will aid in the efficient design of vents to keep the relative humidity low inside the drum.

• Journal of Biosystems Engineering
• /
• v.36 no.5
• /
• pp.361-368
• /
• 2011

The amount of export of paprika has been increased rapidly in recent years. Therefore, its cultivation area has greatly increased in Korea according to current consumer's attraction. Moreover, it becomes one of the major exporting products while it recorded 53 million dollars, in 2009 resulting in 40% of the total vegetables export. Most of the products are exported to Japan, but it is necessary to prolong the quality preservation periods to export paprika to nations like U.S.A. or EU. However, to encourage an export to many countries, washing and disinfection became more important to deal with longer transportation and medical inspection. The non-chemical use is very important due to stronger regulation of safety to agricultural production. Accordingly, this study was performed to determine the optimum conditions and develop a prototype washing machine, hot water washing of paprika. The results were as follows : The working performance of the prototype was 938 kg/hr, and which was 1.5 times higher than the conventional air gun type washing machine. The operation cost of prototype was 30 won/kg, and 56% of the cost was reduced when compared with air gun type washing machine.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.2
• /
• pp.150-159
• /
• 2009

Generally, the operating efficiency of the washing machine is mostly affected by the washing time. The washing time is determined by the amount and the type of the laundry. Although the type of the laundry is easily inputted by the user, but the amount of the laundry is difficult to do. For this reason, the specific process is existed for the estimation of the laundry and the time of the washing mode is determined by the estimated laundry. Therefore, this paper proposes the washing load estimation algorithm by the inertia estimator. The proposed algorithm is implemented on the PMSM drive using the low cost position sensor for practical washing machine application. The proposed algorithm is verified by the drum washing machine for the practical load condition test.