Transactions of the Korean Society of Mechanical Engineers A
/
v.39
no.11
/
pp.1123-1129
/
2015
A pair of two-way valves typically is used in automotive washing machines, where the water flow direction is frequently reversed and highly pressurized clean water is sprayed to remove the oil and dirt remaining on machined engine and transmission blocks. Although this valve system has been widely used because of its competitive price, its application is sometimes restricted by surging effects, such as pressure ripples occurring in rapid changes in water flow caused by inaccurate valve control. As an alternative, one three-way reversing valve can replace the valve system because it provides rapid and accurate changes to the water flow direction without any precise control device. However, a cavitation effect occurs because of the complicated bottom plug shape of the valve. In this study, the cavitation index and percent of cavitation (POC) were introduced to numerically evaluate fluid flows via computational fluid dynamics (CFD) analysis. To reduce the cavitation effect generated by the bottom plug, the optimal shape design was carried out through a parametric study, in which a simple computer-aided engineering (CAE) model was applied to avoid time-consuming CFD analysis and difficulties in achieving convergence. The optimal shape design process using full factorial design of experiments (DOEs) and an artificial neural network meta-model yielded the optimal waist and tail length of the bottom plug with a POC value of less than 30%, which meets the requirement of no cavitation occurrence. The optimal waist length, tail length and POC value were found to 6.42 mm, 6.96 mm and 27%, respectively.
Bae Y. H.;Yang K. W.;Baik S. K.;Kim J.;Chang Y. C.;Lee S. H.
Journal of Biosystems Engineering
/
v.30
no.1
s.108
/
pp.25-31
/
2005
There are more than three hundred garlic peeling facilities in Korea and most of them use pressurized air for skin peeling operation. One of the major problems of using air for the peeling operation is the occurrence of excessive bruises on the flesh of peeled garlic which causes easy microbial contamination and shortening of the shelf lift. To reduce the occurrence of bruises during the peeling operation, a new type of garlic peeling system was developed which use pressurized water. In this system, high pressure water jets were used to separate garlic bulbs and to peel the skin of garlic cloves. Six commercial systems of this type had been developed and installed at several locations in Korea. The design and performance of the latest system according to three pressure levels were described in this paper. Peeling efficiency of the system was as high as $64.7\%$ in one cycle of peeling operation by three chambers installed in series. Incorporation of a sorting system based on machine vision and re-circulation of unpeeled and partially-peeled garlic enhanced peeling efficiency by additional $30\%$, resulting in total peeling efficiency of the final products of approximately $95\%$. Peeling capacity of the system was over 400 kg per hour.
Heo, Da-An;Huh, Eun-Hae;Park, Ji Young;Moon, Kyong Whan;Lee, Kiyoung
Journal of Environmental Health Sciences
/
v.41
no.5
/
pp.314-326
/
2015
Objectives: This study was conducted to identify the ingredients used in ten consumer product categories and determine hazardous substances among these ingredients. Methods: A total of 542 commercial products in ten consumer product categories were selected. The consumer products were sticker removers, washing machine cleaners, multi-purpose cleaners, mold removers, glass cleaners, chlorinated sanitizers, air conditioner cleaners, disposal cleaners, drain cleaners and disinfectant sprays. The company list was complied from governmental records and a market survey. The respective companies were contacted for a list of ingredients found in the 542 products. Results: The corresponding companies listed 163 ingredients. According to European Union (EU) Directive 67/548/EEC, 38 of the 163 ingredients were classified as dangerous substances. Among these substances, 28 ingredients were hazardous to the skin, 15 were hazardous to the eye, and nine were hazardous if inhaled. Three ingredients were classified as CMR (carcinogenic, mutagenic or toxic for reproduction) substances: liquefied petroleum gases (LPG) with carcinogenicity and mutagenicity, and VM&P naphtha and ligroine with carcinogenicity. Conclusion: Various chemicals, including hazardous substances, were used in consumer products. Risk assessment of consumer products is required in order to protect the population from health risks.
The objective of this study was to determine the effect of smoking conditions on the in vitro toxicological activity of mainstream smoke. The 2R4F reference cigarette was machine-smoked by International Organization for Standardization(ISO) and Canadian Intense(CI) conditions. Smoke was analysed for chemical composition and in vitro toxicity. The cytotoxic potencies of both the total particulate matter(TPM), which were collected in Cambridge filter pad, and gas/vapor phase(GVP), which was bubbled through in phosphate-buffer saline in a gas-washing bottle, were assessed neutral red up take assay with chinese hamster ovary(CHO) cells. The assessment for genotoxicity of TPMs generated under ISO and CI conditions was determined using Salmonella mutagenicity assay and in vitro micronucleus assay. When calculated on an equal TPM basis, in vitro toxicity of TPM obtained under CI condition was decreased compared to TPM generated under ISO condition. The results of chemical composition analyses revealed that the lower toxicological activity under CI condition than that of ISO condition could be explained by the decreased in the contents of phenols, N-nitrosoamines and aromatic amines of TPM on an equal TPM basis.
Wang Se-Myung;Shin Min-Cheol;Koo Kun-Mo;Kim Dae-Sung;Bae Won-Ki;Kyong Yong-Soo;Kim Jung-Seon;Kook Jung-Hwan;Thuy Tran ho Vihn
Proceedings of the Korean Society for Noise and Vibration Engineering Conference
/
2006.11a
/
pp.607-611
/
2006
There are several methods to obtain structural vibration for analysis of vibro-acoustic noise. First of all, vibration data can be obtained through the structural analysis using finite element method. Although this method has no need to experiment, the analysis result is unreliable when the structure and the vibration source is complex to model exactly. The second method is to measure vibration using a number of sensors. The analyzed vibro-acoustic noise with directly measured data is setting morereliable when the number of data acquisition points is getting larger. However, it requires large amount of time and effort to measure all vibration data on every node especially when the size of vibrating structure is large. The Modal Expansion Method(MEM), which uses mode information and measurement data, has been introduced to compensate their limits. With a relatively small number of measurement data, the reliable structural vibration for vibro-acoustic noise can be obtained using this semi-analysis method. Although MEM gives reliable result, it is restricted by the number of modes and measurement points. In this paper, structural analysis, direct vibration measurement method and MEM are compared using the simple aluminum box model. Furthermore, the washing machine case is also provided as a comparative example. The Laser Doppler Vibrometer(LDV) was used instead of contact type accelerometer to get vibration data.
Korean manufacturing industry have recently faced the catch-up of China in the mass commodity product, such as automotive, display, and smart phone in terms of market as well as technology. Accordingly, discussion on the importance of achieving catch-up in complex product systems (CoPS) has been increasing as a new innovation engine for the industry. In order to achieve successful catch-up of CoPS, we explored emerging technologies of CoPS, which are featured by the characteristics of radical novelty, relatively fast growth and self-sustaining, through the study of emerging technologies of gas turbine for power generation. We found that emerging technologies of the gas turbine are technologies for combustion nozzle and composition of electrical machine for increasing power efficiency, washing technology for particulate matter, cast and material processing technology for enhancing durability from fatigue, cooling technologies from extremely high temperature, interconnection operation technology between renewable energy and the gas turbine for flexibility in power generation, and big data technology for remote monitoring and diagnosis of the gas turbine. We also found that those emerging technologies resulted in technological progress of the gas turbine by converging with other conventional technologies in the gas turbine. It indicates that emerging technologies in CoPS can be appeared on various technological knowledge fields and have complementary relationship with conventional technologies for technology progress of CoPS. It also implies that latecomers need to pursue integrated learning that includes emerging technologies as well as conventional technologies rather than independent learning related to emerging technologies for successful catch-up of CoPS. Our findings provide an important initial theoretical ground for investigating the emerging technologies and their characteristics in CoPS as well as recognizing knowledge management strategy for successful catch-up of latecomers. Our findings also contribute to the policy development of the CoPS from the perspective of innovation strategy and knowledge management.
Kim, jeong hyun;Jeong, myeong jae;Ju, min chan;Kim, Dong Il;Chung, Hee Chang
Proceedings of the Korean Institute of Information and Commucation Sciences Conference
/
2018.05a
/
pp.660-662
/
2018
With the increasing number of dog markets in modern society, dog owners are deeply rooted in our lives and affecting society. Following this trend, a variety of products have recently been introduced, and it is believed that they have not yet developed much in functional aspect of the post-cleaning system. Due to the busy social life of modern people in everyday life, there is no room to manage dogs in terms of time, cost and environment, which is causing problems. In order to avoid these problems, we are going to develop Eduardo, infrared sensor modules, and automatic pump systems. It is also designed to make it more convenient for users through a laxation pad automatic washing machine.
The purpose of this study is to figure out the urban low-income consumers' present possesion condition of electric appliances, the way of purchasing, shopping scope of groceries and electric appliances, and the shopping scope and information seeking behavior of groceries and electric appliances according to the socioeconomic variables, and the shopping scope of electric appliances according to the way of paying price. For this purpose 129 low-income consumers living in Inchon were interviewed through questionnares. Finally 100 questionnares were analyzed. The first major of this study is that the possesion rates of color television set and refrigerator are comparativelyl high, while those of washing machine, record player and camera are low. In case of electric appliances, consumers usually purchase things on credit and as a shopping place, they usually go to a commercial agent. In case of groceries, they usually buy things for cash, and in case of one price labeled groceries they usually buy things at a supermarket. Second, according to the way of paying price, the shopping scope of some electric appliances is broader in case of purchase for cach than in case of purchase on credit. Third, the shopping scope and information seeking behavior classified by the socioeconomic variables according to the income, age and education. That is as the income and education become higher and the age becomes lower, the shopping scope becomes broader, mass media information source is much more uaed and the frequency of seeking becomes higher. Through this study, I would like to suggest the followings. (1) The problem of low-income consumers is closely connected with the low education level, so it can be solved a bit through consumer education. (2) Especially the consumers' problem is more serious in case of those who are aged and get very low income and education. Therefore special attention is needed to those consumers.
With increasing numbers of immigrant workers in Korea, the supply of socially and culturally acceptable housing has become an important issue. The purpose of this study was to analyze the state of Goryo-in housing and domestic living conditions in metropolitan areas of Korea. This study will present essential information directly relevant to the establishment of practical housing policy for Goryo-in in Korea. Furthermore, data collected and analyzed here will enable comparative investigation with Goryo-ins who live in Russia and Central Asia. Using ethnographic methodologies, we examined 20 Goryo-in households in relation to their usage of domestic space. The following conclusion were established; 1). The most popular L D K(Living Dining Kitchen)type consisted of kitchen plus one or two bedrooms. The majority of households lived in quarters with separated kitchen and living room areas. 2). Most households had a washing machine in the bathroom due to a lack of space, and they regarded the bathtub and the drain hole of the bathroom as very necessary. The Goryo-ins interviewed preferred quarters with separate bathroom and toilet areas, in order to allow simultaneous use. 3). Their most preferred seating style was chairs, while making Kimchi at home was not very popular. 4). All respondents took their shoes off and wore slippers at home, while also indicating a preference for designated shoes space at the entrance to the house. 5) Half of the households had a carpet or mat in the bedroom or living room, both for keeping warm and aesthetic reasons. 6). All households had modified Ondol heating system and demonstrated satisfaction with this. The majority of Goryo-ins interviewed had a different living style compared to households in Russia and Central Asia which were related to less favorable economic conditions in Korea.
Journal of Korean Academy of Fundamentals of Nursing
/
v.4
no.2
/
pp.229-243
/
1997
Especially in NICU(Neonatal Intensive Care Unit), handwashing is an important factor in decresing nosocomial infections due to reduced immunity, prematurity and various invasive procedures. The purpose of this study was to investigate the basic characteristics related to handwashing by NICU nurses. It was composed of three parts ; questionnaire survey I (genoral characteristics of handwashing), questionnaire survey II(the awareness degree of handwashing importance) and actual performance. This study was performed from Oct. 8 to 14 in 1994. The results of this study were as follows ; 1. Frequency of handwashing were different by shift of working about 47.1% of the respondents. They were washing most frequently during day-shift about 75% of above. According to self evaluation to handwashing frequency, 64.7% of the respondents said their frequency of handwashing was inadequate, because of being too busy.(45.1%), bothering caused by detergent or disinfectant(17.6%), and too far from handwashing facilities(17.6%). 2. The most common handwashing agent was soap(88.2%), 52.9% of the subjects experienced adverse effects after handwashing ; rough hand(44.5%), dryness(33.3%) All subjects washed their hands with running water, and 70.6% of the subjects washed upto wrist. In duration of handwashing, 52.9% of subjects washed hands 5 to 10 seconds, 29.5% of them did 11 to 15 seconds. 3. 29.4% among subjects had participated to take in the handwashing educational program. About 60% responded they would like to take the course of handwashing if possible. 4. The important nursing activities that need handwashing were chaning of caring ostomy, suctioning, chaning IV dressing site. On the other hand, they responded handwashing was not essential before dealing with omitus, before and after transfering machine, before chaning diaper(stool) 5. Handwashing performance was 61.7%. Among seven nursing activities, suctioning(73.4%) was the highest, the next was dealing with discharge or sampling(71.1%), the lowest was bathing(34.6%). The performance was better after(70.2%) nursing activities that before(52.5%), and day(63.6%) or evening(68.3%) shift than night(56.7%)
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.