• 제목/요약/키워드: Washing time

검색결과 673건 처리시간 0.023초

솔잎 추출물의 염색성과 기능성 (제2보) -단백질섬유에 대한 염색성- (Dyeability and Functionality of Pine Needles Extract (Part II) -Dyeing Properties of Protein Fiber-)

  • 우효정;이정순
    • 한국의류학회지
    • /
    • 제35권4호
    • /
    • pp.466-475
    • /
    • 2011
  • The dyeing properties of protein fiber with pine needles colorants were studied through an investigation of the effect of dyeing conditions such as dye concentration, dyeing temperatures and time on dye uptakes, effect of mordants, and color change. In addition, the various colorfastness of dyed silk and wool fabrics were evaluated for practical use. The antimicrobial ability, ultraviolet-cut ability, and deodorant ability were also estimated. The dye uptake increased as the dyeing concentration increased and this enabled the obtainment of the Langmuir absorption isotherm. The dye uptake increased as the dyeing time and temperature increased. Pine needles colorants showed relatively good affinity to protein fiber and produced a yellow color. Post-mordanting was more effective than the pre-mordanting, and the dye uptake of fabrics improved by mordanting. Except for washing, the colorfastness of dyed fabrics showed a low rating. However, the colorfastness to light and the dry cleaning of fabrics mordanted with N.Cu, and the friction fastness of fabrics mordanted with Cu improved. The guide fabrics showed very good antimicrobial abilities of 99.9%; in addition, the ultraviolet-cut ability and deodorant ability improved in fabrics dyed with pine needles extracts.

안나토를 이용한 견직물의 염색성 (The Dyeability of Silk Fabrics with Annatto)

  • 한미란;조원주;이정숙
    • 한국염색가공학회지
    • /
    • 제20권6호
    • /
    • pp.35-41
    • /
    • 2008
  • This study investigated the dyeing properties of silk fabrics with Annatto. The dye stuff was extracted by distilled water at $60^{\circ}C$, 10minutes, 1:100 of bath ratio. Dyeability(K/S) and color fastness of silk fabrics were tested under conditions of various concentrations, time, temperature, repeat-numbers of dyeing, pH, mordants variables and methods of mordanting. The highest absorbance was found in methanol extract of Annatto. The optimum dyeing concentration, time and temperature of silk fabrics with Annatto were 25%(o.w.f.), 60min and $60^{\circ}C$ respectively. The K/S value showed higher in post-mordanting than in pre-mordanting, and especially post-Fe mordant showed highest K/S value. In the case of colorfastness, Cu-mordanted fabrics were good washing fastness. Dry cleaning fastness appeared 4-5 grades and light fastness showed lowest grade.

감 탄닌 추출물의 열 발색공정에 의한 면직물 염색 (Coloration of Cotton Fabrics with Tannins of Persimmon Extracts by Heating Process)

  • 정종석;박지선;김태경
    • 한국염색가공학회지
    • /
    • 제20권3호
    • /
    • pp.25-30
    • /
    • 2008
  • In order to examine the availability of a heating process for persimmon dyeing, the cotton fabrics treated with various concentrations of persimmon extracts were heated at various temperatures and times. The raw and fermented persimmon extracts were used for the coloration. For both extracts, the color strength of fabrics was. increased with the increase of coloration temperature, time, and concentration of the extracts. Considering the practical aspects. and color strength, the temperature around $200^{\curc}C$ and the time longer than 60 minutes can be determined as the. optimum coloration conditions of persimmon extracts onto cotton fabrics. However, somewhat loss of strength by the hearing process seems to be inevitable. The color fastness to washing was excellent for both color change and staining showing a rating of 5.

농촌전통테마마을에 대한 이용자 평가 및 그린투어리즘에 대한 도시주민의 의식에 관한 연구 - 김천옛날솜씨마을과 경상북도 김천시를 대상으로 - (A Study on Participator's Evaluation of the Rural Theme Village and Urban Inhabitants' Consciousness of Green Tourism - Focused on the Rural Theme Village 'Yetnalsomsi-Maul' and Gimcheon City in Gyeongsangbuk-do -)

  • 장한섭;김익환;김영민
    • 한국농촌건축학회논문집
    • /
    • 제11권2호
    • /
    • pp.1-8
    • /
    • 2009
  • This paper evaluate use on facilities of green tourism by participator's questionnaire and urban inhabitants' questionnaire. As the result of study, it shows follows; 1) To make town look more traditionally we should rebuild the buildings and the styles of roof with our own traditional rural system. And, we also change the block and brick style fence into soil or rock one instead to look rural path. The agricultural land and watercourse should be left naturally to be looked non-polluted environment. 2) The outdoor toilet, washing stand and distribute should be maintained and managed clearly every time. Residents' own housing also should be maintained to promote the home-stay lodging. 3) To improve the satisfaction of people's need of agricultural product, the special market building or place that could be packed and sold the product at the same time should be built or made. And, it should be located in the harmonious spot with the natural scenery and good parking lot.

  • PDF

견직물의 날염에 관한 연구 (I) - Chlorotriazinyl계 반응성염료 - (Studies on the Printing of Silk Fabric (I) - Chlorotriazinyl Reactive Dye)

  • 탁태문;김순심;이양후
    • 한국잠사곤충학회지
    • /
    • 제25권2호
    • /
    • pp.58-64
    • /
    • 1984
  • 반응성염료중 chlorotriazinyl계 염료로 견직물에 날염가공 하여, 증열시간, 호료의 점도, 알칼리농도에 의한 염착량 및 고착량을 측정하여 견에 대한 반응성염료의 날염특성에 관하여 연구한 결과를 다음과 같이 요약한다. 1) 증열시간과 더불어 염착량 및 고착량은 증가하였으며, dichlorotriazinyl계 염료는 20분부근에서 최대치를 나타내었다. 2) 고착률은 90%이상으로 높은 고착률을 나타내었다. 3) 호료의 점도에 따라 염착량 및 고착량은 달라지며, 적당한 점도가 필요함을 시사한다. 4) 알칼리 농도는 호료 100g에 대하여 NaHCO$_3$2g을 첨가하였을 때 염착량 및 고착량이 가장 높았다. 5) 염색견뢰도중, 실용상 가장 중요한 세탁견뢰도가 매우 높았다.

  • PDF

분산염료에 의한 PLA 직물의 염색성 (Dyeing Properties on Polylactic Acid (PLA) Fabrics by Disperse Dyes)

  • 이소희;송화순
    • 한국의류학회지
    • /
    • 제37권7호
    • /
    • pp.952-961
    • /
    • 2013
  • This study optimizes a suitable dyeing method for polylactic acid (PLA) fabrics using disperse dyes. For this, disperse red 60 (DR 60), disperse blue 56 (DB 56), and disperse yellow 54 (DY 54) were used and dyed on PLA fabrics dependent of dyeing temperature and time. The fastness of PLA fabrics dyed with three disperse dyes were evaluated; in addition, dye exhaustion, color strength (K/S value), and colorimetric properties of PLA fabrics were compared with PET fabrics. The experiments indicated optimum dyeability of PLA fabrics with disperse dyes. The dyeing temperature was $90^{\circ}C$ for every dye and the dyeing time were 20 min, 60 min, and 40 min for DR 60, DB 56, DY 54, respectively. PLA fabrics had good color fastness to washing, dry cleaning fastness, hot pressing fastness, rub fastness, and perspiration fastness by DR 60, DB 56, and DY 54. The dye exhaustion of PLA fabrics were lower than PET fabrics; however, K/S values were higher than PET fabrics.

Leachability of Zinc Borate-Modified Oriented Strandboard (OSB)

  • Lee, Sun-Young;Wu, Qinglin
    • Journal of the Korean Wood Science and Technology
    • /
    • 제35권5호
    • /
    • pp.46-57
    • /
    • 2007
  • The leachability of boron in zinc borate (ZB)-modified oriented strandboard (OSB) from southern wood species was investigated in this study. The leaching experiments were conducted by exposing edge-sealed OSB samples under running water at $31^{\circ}C$ for 8, 24, 72, and 216 h. The results from leached samples were compared with those from the unleached controls. Boron leaching of the modified OSB occurred upon the initial water exposure, and the leaching rate decreased as the leaching time increased. Initial boric acid equivalent (BAE) level, wood species, and sample thickness swelling significantly influenced the leachability. There was no consistent effect of polyethylene glycol (PEG) on zinc borate leaching. The glue-line washing within OSB due to thickness swelling of the test samples under water and decomposition of the borate to form water-soluble boric acid were thought to be two possible causes for the observed leaching. The relationship between assayed BAE and leaching time followed a decaying exponential function for zinc borate treated OSB. From the boron/zinc ratio after each leaching period, boron element in ZB was more or less leachable. The material constant of the regression models allowed comparing the leachability of the modified OSB for various wood species. An unified leaching method for treated wood composite materials is needed.

출산 풍속에서 모-조모의 세대간 차이 연구 (Generational Differences in Korean Baby-Delivery Culture between Young Mother and Grandmother Generations)

  • 유안진;민하영
    • 대한가정학회지
    • /
    • 제38권8호
    • /
    • pp.99-110
    • /
    • 2000
  • The purpose of this study was to investigate the differences in traditional baby-delivery practices between young mother and grandmother generations. The subjects were 118 young mothers and 118 their own mothers or mothers-in-law in Tae Gu district. Young mothers had the first baby aged from 2-to 2.5-year-old. The subjects answered the questionnaires on Korean traditional baby-delivery practices developed by the researchers based on literature reviews. The data were analyzed using Frequencies, Percentages, Crosstabs, and t-test. The results of this study were as follows: 1. More grandmothers believed in supernatural being who influenced pregnancy and used to be called as 'grandma Sam Shin', expected to have son, and had charms then young mothers. But less grandmothers had sexual intercourse at the time of ovulation, took physical care, and practiced fetal education than young mothers 2. On the other hand, no generation differences were found in dreaming of foretelling conception(Te Mong), eating a restroative and food to get pregnancy, and washing own's hair or body and avoiding attending a funeral near the time of baby-delivery. 3. Most of young mothers gave birth in hospital with the doctor's heap, whereas most of grandmothers did at their home with the help of the experienced old women. Most of young mothers'husbands were at the waiting room in the hospital, but about half of grandmothers'husbands were at work when their wives grove birth.

  • PDF

칡잎을 이용한 견직물의 녹색염 연구 (Dyeing of silk in green color used kudzu-vine leaves)

  • 정영옥
    • 한국농촌생활과학회지
    • /
    • 제10권2호
    • /
    • pp.28-36
    • /
    • 1999
  • The purpose of this study was to examine the best condition for dyeing silk in green color used kudzu-vine leaves which were available everywhere in our country except winter. Dyeing experiments were done under various dyeing conditions according to extracting method of dyebath from kudsu-vine leaves, pH of dyebath, dyeing time, concentration of dyebath and mordants which were treated after dyeing. Color difference ($\Delta$E) and Munsell's HV/C and color fastness to drycleaning, washing, perspiration and light were measured. The main results were as follows : 1. The color difference of dyed silk increased in dyebath B & C which were extracted in alkali water comparing with dyebath A which was extracted in distilled water. In dyebath B & C, the color difference was the highest in case of dyebath pH 5.0. 2. The colors of fabrics dyed in dyebath A were mainly yellow and the colors in dyebath B & C were yellow green. 3. The color differences of dyed silk increased according to dyeing time and concentration of dyebath. 4. The color were changed with the treatment of mordants. The most strong green color could get in Cu mordant treatment in dyebath C, pH 5.0, and concentration 4. 5. The peak of reflectance within the visible light of the fabric dyed in the most strong green color could be seen in $\lambda$500-520nm. 6. On the whole, the colorfastness of experimental fabrics dyed in dyebath B, C and Cu mordant treatment was good except the colorfastness to the light.

  • PDF

감즙에 의한 합성섬유의 염색성과 기능성 (Dyeability and Functionality of Synthetic Fabrics treated with Persimmon Juice)

  • 허만우;배정숙
    • 한국염색가공학회지
    • /
    • 제26권2호
    • /
    • pp.131-142
    • /
    • 2014
  • This paper was focused on investigating synthetic fabrics treated with persimmon juice by padding mangle repeatedly. The merit of dyeing by pad-dry method was easier color reproduction than dyeing by immersion method. With increasing number of padding, the dyed nylon fabrics showed deeper yellow-red colors, but dyed polyester fabrics had no uniform tendency. The dyed synthetic fabrics had a 3rd grade of ligtht, 4~5th grade of perspiration fastness, 5th grade of stain washing fastness, and 3~5th grade of rubbing fastness. As the number of padding and exposed time to sunlight or UV light increase, the value of K/S and ${\Delta}E$ increased and the colors become much deeper gradually. The color development had completed about 70 hours exposure to UV light. As the padding time of dyeing with persimmon juice increased, stiffness and water repellent property were enhanced, respectively. Also, the dyed synthetic fabrics had good antibacterial activity and deodorization.