• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.19-24
• /
• 2003

Recently, various efforts to make more speedy and precision machine tool to improve productivity and also various efforts to solve environmental problem are going on, so that dry cutting in manufacturing industry, which needs environmental conscious design and development of manufacturing technique, is becoming a very important assignment to solve. Because dry cutting does not use cutting fluid, we need other methods that can be used instead of cutting fluid, which does cooling, lubricating, chip washing, and anti-corrosion. Especially, because turning is a continuous work, the consideration of tool life and surface roughness due to continuous heat and poor lubrication is important. The purposes of this paper are the consideration of how well the compressed air can work instead of cutting fluid, and also the development of the method to select the optimum machining condition by the minimum numbers of experiments through the Taguchi method.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권3호
• /
• pp.54-59
• /
• 2007

It is widely recognized that increasing the accuracy and diversity of rotating machinery necessitates an appropriate diagnostic technique and maintenance system. Until now, operators have monitored machinery using their senses or by analyzing simple changes to root mean square output values. We developed an expert diagnostic system that uses fuzzy inference to expertly assess the condition of a machine and allow operators to make accurate judgments. This paper describes the hardware and software of the expert diagnostic system. An assessment of the diagnostic performance for five fault phenomena typically found in pumps is also described.

• 대한치과교정학회지
• /
• 제26권5호
• /
• pp.497-507
• /
• 1996

산부식된 법랑질표면의 오염은 브라켓의 레진 접착력에 영향을 미친다고 보고되어 왔다. 이 연구의 목적은 인산액이 법랑질과 반응하여 수용성염 및 불수용성염을 형성하는 경우와 부식표면이 타액오염된 경우에, 이의 수세시간이 브라켓의 레진접착 전단결합강도에 미치는 영향을 관찰하기 위하여 시행되었다. 치과 교정치료를 목적으로 발거된 총 234개의 상하악 소구치를 대상으로 $37\%$ 인산액으로 60초간 부식한 군, $20\%$ 인산액으로 50초간 부식 한 군, $37\%$ 인산액으로 60초간 부식 하고 타액오염시킨 군으로 나누고, 인산부식군은 각각 0초, 5초, 10초, 20초간 수세하고, 타액오염 군은 0초, 20초,30초 수세하거나, 재부식후 5초, 10초, 20초간 수세한후 레진접착제로 브라켓을 접착하였다. 5각군의 법랑질표면을 주사전자현미경과으로 검경하고, 전단결합강도를 측정하여 비교검토한 결과 다음의 결과를 얻었다. 1) 산부식후 수세를 하지않으면 레진접착제의 전단결합강도가 현저히 감소 하였다. 2) $37\%$ 인산부식액으로 부식시키고 5초, 10초, 및 20초간 수세한후의 접착레진 전단결합강도 사이에는 차이가 없었다. 3) $20\%$ 인산액으로 부식시키고 5초, 10초, 및 20초간 수세한 후의 전단결합강도사이에는 차이가 없었으나, 5초간 수세후의 전단결합강도는 측정치의 변이가 매우컸다. 4) 부식후 타액으로 오염된 법랑질 표면은 5초, 20초간 및 30초간 수세후 및 재부식 한 후의 브라켓접착레진의 전단결합강도사이에 차이가 없었으나, 5초간 수세만한 군의 전단결합강도는 변이가 매우컸다. 이상의 결과에 의하면 수용성 염이 생성되는 농도의 인산액으로 부식하고 5초간 수세후 불수용성 염이 생성되는 농도의 인산액으로 10초간 수세후에, 그리고 타액오염된 부식표면을 재부식없이 20초간 수세후에 브라켓을 접착하면 임상적으로 유용한 부라켓 접착레진의 전단 결합강도를 얻을수 있을 것으로 추정된다.

• 한국의류산업학회지
• /
• 제6권2호
• /
• pp.163-168
• /
• 2004

The domestic textile industry is currently making an active effort to present high value-added materials that can respond immediately to the wants and needs of consumers sensitive to the of originality of design and emotionally appealing fashion materials. This paper attempted to present the creative development of materials in the contemporary clothing culture in which consumers' needs are individualized and differentiated and the cycle of life in fashion materials is getting shorter. To be specific, the paper presented the texture of peculiar expression to diverse cotton materials using the Woolsmok technique in the processing of felt. The chosen Merino wool was felted to 8 kinds of cotton with different density and structure. The touch, texture, visibility and complex susceptibilities of new materials were presented as different materials of cotton and wool were transformed into one material. In felting cotton fiber through wool, the transformation of diverse textures was presented and compared in the method using the washing machine in an attempt to enhance the efficiency of the traditional craft technique and work. This study proposed the possibility of placing the new material made up of cotton and wool beyond the range of functionality of each simple material, activating it as the peculiar material and expanding it to the range of its use as fashion material in the clothing industry. It is expected that this material will become competitive material at home and abroad by being activated as the clothing material of artistry, workability and marketability that can satisfy the tastes of consumers who call for high quality and diversification.

• 한국지능시스템학회논문지
• /
• 제5권2호
• /
• pp.3-12
• /
• 1995

A controller utilizing fuzzy logic is developed to control the speed of a motor in a washing machine by choosing an appropriate phase. Due to the hardship imposed on obtaining a result from a relation established for inputs, present speed and present rate of speed, and ouput, a phase, of the system that can be tested against an experimental result, it is impossible to apply a genetic algorithm to fine-tune the fuzzy logic controller. To avoid this difficulty, a proper assumption that the parameters of an if-part of a primary fuzzy logic controller have a functional relationship with an error between computed values and experimental ones in made. Setting up of a fuzzy relationship between the parameters and the errors is then achieved through experimentally obtained data. Genetic Algorithm is then applied to this secondary fuzzy logic controller to verify the fuzzy logic. In the verification process, the primary fuzzy logic controller is used in obtaining experimental results. In this way the kind of difficulty in obtaining enough experimental values used to verify the fuzzy logic with genetic algorithm is gotten around. Selection of the parameters that would produce the least error when using the secondary fuzzy logic controller is done with applying genetic algorithm to the then-part of the controller. In doing so the optimal values for the parameters of the if-part of the primary fuzzy logic controller are assumed to be contained. The experimental result presented in the paper validates the assumption.

• 한국주거학회논문집
• /
• 제25권3호
• /
• pp.53-62
• /
• 2014

This paper investigates whether the use of Rainwater Harvesting Systems (RWHSs) to provide water for washing machines in Hong Kong residential buildings would be financially attractive. In such systems, rainwater is accumulated and reused for doing laundry, garden irrigation, flushing toilets, and even drinking. Thus, the analysis of RWHSs' financial feasibility is essential for construction projects. RainCycle is used to validate financial feasibility, considering particular circumstances and data relevant to the Hong Kong context. A range of different scenarios by adjusting three factors are evaluated: catchment area, water demand, and discount rate. It is suggested that $2,000m^2$ would be a suitable catchment area in a typical Hong Kong residential building and it is demonstrated how water demand and discount rate influence the financial performance of RWHSs. In particular, the financial performance of RWHSs is sensitive to discount rates. The results suggest that the RWH system would be worthwhile for buildings with a lower number of floors, but would barely achieve financial validation in Hong Kong's super high-rise residential buildings.

• 한국주조공학회지
• /
• 제28권5호
• /
• pp.237-241
• /
• 2008

This study has been carried out to investigate the wear and heat resistant properties of durable moldwash agent for Al gravity casting according to mold washing process conditions. The wear properties of coated specimen were performed by sliding wear testing machine and heat resistance were evaluated by measuring the loss of coated moldwash agent during emerging of coated specimen in Al melts. During testing, experimental variables were mold surface temperature, moldwash agent/distilled wear, and additive concentrations. The lower additive concentration and mold temperature caused the smooth surface roughness of coated specimen, It was found that the specimen coated with moldwash/water ratio 1:3, additive concentration 9wt% and mold temperature higher than $200^{\circ}C$ showed superior wear and heat treatment. Also, these results were supported by fluidity test.

• 한국의류학회지
• /
• 제28권3_4호
• /
• pp.422-432
• /
• 2004

This study investigated underwear consumption behavior of women, who were 20∼59 years old and resided in Incheon during 2002 summer. 372 women completed questionnaires, and data were analyzed using factor analyses, t-test, ANOVA, $\chi$$^2$-analyses. They usually purchased underwear considering comfort and economic factor at a discount store. They wore sleeveless T-shirts, but they didn't wear underpants except panties highly all the year round. Higher rate of them wore pantyhose instead of underpants during autumn, winter and spring. They demanded unstitching of stitches and lengthened sleeves in most of the groups. And older and lowly educated women group wanted widen armhole of upper underwear, and tighten waistband of panties. They generally washed in washing machine using cold water. Besides they added oxygen bleach and softner during wash and final rinse. Older than 20's boil their underwear frequently. The women in a group of boiling commonly answered the looseness of waistband. It is recommended not to boil but to soak with bleach added warm water for improving the whiteness and durability of underwear. For a treatment with higher temperature deprives the elasticity of spandex.

• 한국염색가공학회지
• /
• 제22권2호
• /
• pp.101-109
• /
• 2010

The objective of this study is to investigate the characteristics of natural indigo dyeing of cotton fabric. Reduction and dyeing were carried out by one-step process using an infrared dyeing machine at the liquor ratio of 1:100, and subsequently oxidation and washing in water were followed. Dye uptake was increased with the increase of indigo concentration. Over the full range of dyeing tests, the dyeing condition was optimized to $40^{\circ}C$ for 40min. For most of dye concentrations, the cotton fabrics showed mainly PB color. Maximum K/S value was shown at 4g/L of sodium hydrosulfite concentration and the color strength increased with the increase of dye concentration. Value(lightness) decreased with the increase of dye uptake irrespective of mercerization or reduction method, while the mercerized cotton showed two times higher dye uptake than the untreated cotton. Whereas hue of the untreated cotton showed large decrease of P character(5.6~3.5 PB) with the increase of dye uptake, that of the mercerized cotton increased P character(4.7~5.5 PB). Irrespective of mercerization, value and chroma decreased with the increased of dye uptake. In addition, the untreated showed lower chroma than the mercerized cotton. In the case of traditional reduction, hue of the untreated cotton was changed very little with the increase of dye uptake. For hydrosulfite reduction, P character decreased with the increase of dye uptake. The difference of hue value was small with the change of reduction method(hydrosulfite reduction or traditional fermentation). Color character was not influenced by the changed maximum absorption wavelength. Washing fastness showed 4~4/5 shade change rating without any staining. And dry rubbing fastness was good at low color strength. The bacterial reduction ratios of dyed cotton fabric were also increased.

• 한국의상디자인학회지
• /
• 제10권2호
• /
• pp.125-138
• /
• 2008

For physical and hand property evaluation of fabrics, the knitted fabrics from 11 types of machines knitting fancy yarns, boucle (M1), knot (M2), snarl (M3), and slub (M4), tamtam (M5), tubular (M6), fur 1 (M7), bead (M8), fur 2 (M9), fur 3 (M10), and ladder (M11) yarns, were prepared with 7-10 G plain stitch. Washing test and pilling test had also been carried out. For hand properties by objective sensibility evaluation, 17 items of sir mechanical properties using KES-FB (Kawabata Evaluation System) had been measured. Then hand values of knitted fabrics were calculated with a calculation formula, namely KN-402-KT. Finally the total hand values were obtained through KN-301-WINTER. As a result of physical properties and objective evaluation for machines knitting fancy fabrics, most of them shrank in the direction of wale and course after the washing test, in which their shrinkage rate had a maximum of 3.5%. Therefore, the washing test indicated that the shrinkage ratio of knitted fabrics had a minor change. The results of the pilling test are mostly 4-5th grade, and all of the machines knitting fancy fabrics showed good results in the pilling resistance. In hand properties and objective sensibility evaluation, twisted fancy yarns, such as boucle (M1), knot (M2), snarl (M3), and slub (M4), were superior to bonding rigidity (B) and shear rigidity (G). The surface property between course and wale differs in all samples and course direction is tougher than wale direction. FUKURAMI (fullness and softness) of all samples have high values, besides NUMERI (smoothness) of tamtam (M5) and boucle (M1), which were rather good. Most samples except fur 1 (M7) had low KOSHI (stiffness) value. The total hand value (THV) of twisted yarns was low. This study proves that manufacturers, who plan knitting yarn products and knit fashion, can apply these data to develop machines knitting yarns and knits that fit the consumers' demands.