• Journal of Chest Surgery
• /
• v.11 no.2
• /
• pp.129-134
• /
• 1978

Two hundred and seventeen patients underwent diagnostic rigid bronchoscopy or bionchofiberscopy to evaluate the cytologic diagnosis in the lung cancer patient at the department of chest surgery of Yon-Sei university, college of the medicine from 1971 to 1977 year. One hundred and twenty cases of these patients were taken rigid bronchoscopy and ninety four cases of these patient were taken bronchofiberscopy. Cytologic examination of the sputum was done in 214 cases and sputum cytology was positive in 50 cases [23.4%]. Rigid bronchoscopy was made in 120 cases and this bronchoscopic cytology including bronchial washing and bronchial biopsy was positive in 34 cases [28.5%]. Bronchofiberscopy was performed in 94 cases and was positive in 45 cases [47.5%]. Histopathologically, 41 cases [43.6%] were epidermoid cell carcinoma, 8 cases [8.5%]of undifferentiated cell type, 12 cases [12.8%]of adenocarcinoma, 8 cases [8.5%]of alveolar cell type, and the 25 cases were undetermined. Cytologic examination of the sputum lacks the accuracy of the bronchoscopies in terms of both localization and accurate histologic indentification of the type of neoplasm. Rigid bronchoscope has the advantage of permitting identification of a tumor in a central location and of providing a sufficient amount of biopsy material for accurate diagnosis of carcinoma. However, it has the disadvantage of limiting examination to the larger, more central portions of the tracheobronchial tree. Bronchofiberscope had the advantage of examine upper lobe as well as other portions of the tracheobronchial tree which could not be visualized with the rigid bronchoscopy. A positive diagnosis in bronchofiberscopy was obtained in the highest rate, 47. 8% [45 cases]. A1 last, if a bronchogenic carcinoma is suspected on the basis of either symptoms of an abnormality on the chest film the diagnostic work-up-sputum cytology, bronchial washing, bronchoscopic biopsy, scalene node biopsy, thoracentesis and mediastinoscopy explothoracotomy etc-should precede in an attempt not only to obtain the higher positive diagnosis but also to obtain a tissue diagnosis and to evaluate the stage of the disease and to ascertain the appropriate mode of therapy.

• Membrane and Water Treatment
• /
• v.9 no.1
• /
• pp.43-51
• /
• 2018

Hollow fiber (HF) membranes are gaining wide interest over flat membranes due to their compaction and high area to surface volume ratio. This work addresses the fabrication of HF from polysulfone (PS) and polyethersulfone (PES) using N-methylpyrrolidone (NMP) as solvent in addition to other additives to achieve desired characteristics. The semi-pilot spinning system includes jacketed vessel, four spinneret block, coagulation and washing baths in addition to dryer and winder. Different parameters affecting dry-wet spinning phase inversion process were investigated. Dope compositions of PES, NMP and polyvinyl pyrrolidone (PVP) of varying molecular weights as additive were addressed. Some critical parameters of importance were also investigated. Those include dope flow rate, air gap, coagulation & washing baths and drying temperatures. The measured dope viscosity was in the range from 1.7 to 36.5 Pa.s. Air gap distance was adjusted from 20 to 45 cm and coagulation bath temperature from 20 to $46^{\circ}C$. The HF membranes were characterized by scanning electron microscope (SEM), atomic force microscope (AFM) and mechanical properties. Results indicated prevalence of finger like structure and average surface roughness from about 29 to 78.3 nm. Profile of stress strain characteristics revealed suitability of the fibers for downstream interventions for fabrication of thin film composite membrane. Different empirical correlations were formulated which enable deeper understanding of the interaction of the above mentioned variables. Data of pure water permeability (PWP) confirmed that the fabricated samples fall within the microfiltration (MF)-ultrafiltration (UF) range of membrane separation.

• International Journal of Internet, Broadcasting and Communication
• /
• v.7 no.2
• /
• pp.96-104
• /
• 2015

Fischer Tropsch reaction is one of the interesting topic for renewable and clean energy. Polymerization of carbon monoxide or carbon dioxide with hydrogen over metal supported catalyst can produce long chain hydrocarbons. Synthetic liquid hydrocarbons are promising alternative to fossil fuels. This research work has been focused on the synthesis of Fe based catalyst for Fischer Tropsch reaction. Mesoporous silica (MS) support prepared by a precipitation method using two different washing solution, distilled water (DW) and acid in ethanol solution (ET), and different calcination temperature. Then, Fe/MS was prepared by an incipient wetness impregnation method. All of samples were systematically characterized using various physical and chemical techniques. TEM and XRD analysis were used to ensure that the cubic Ia3d mesostructure is stable after calcination. FTIR spectra are useful to ascertain the existence of template in the support. TPR studies were also used to understand the nature of Fe species and their reducibility. The results reveal that washing the support with distilled water and calcination at $550^{\circ}C$ can efficiently remove the triblock copolymer templates. The existence of template in the support affects the textural properties of all catalyst investigated.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.1
• /
• pp.172-181
• /
• 2004

The purpose of this study was to develop functional lab gowns in the view of safety and work efficiency. As the first step of this study, we surveyed on satisfaction rates, preferences and inconvenience items in regard of lab gowns. The data was obtained from 138 graduate students specialized in science and 113 medical students. Respondents answered that the first purpose of wearing lab gown was to protect body from danger. Wearing frequency followed with ‘always’, ‘as possible as’, and then ‘sometimes’. Forty-five percentage of respondents answered that they didn't wear lab gowns often in summer because of hot weather. The contaminated or damaged parts of lab gowns followed with cuffs, abdomen, thigh, lower part, and then chest. Washing frequency followed with ‘once a month’, ‘once per six months’, and then ‘more than once a week’ There were significant differences in normal wearing frequency, wearing frequency by season and washing frequency due to major. There were no significant difference by sex and major in all questions. In regard of the protective capacity of current lab gowns, most respondents answered that ‘It's normal’(60%), ‘It's enough’(21%), so that they didn't show much dissatisfaction. Forty-three percentage of respondents were not satisfied with cuffs. Respondents answered that the cuffs were in danger and inconvenient because of broad cuffs. In regard of color, preference for white were high and followed with ivory, light sky, light green. and then light pink. Materials of current lab gowns were cotton/polyester or polyester 100%. Sixty-eight percentage of respondents were satisfied with that and others were not. The reasons for dissatisfactions were as follows; those materials were not protective to chemicals thoroughly enough. Cotton/polyester materials were heavy. Wearing sensation of polyester 100% was not good.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.3
• /
• pp.256-265
• /
• 2017

Seafood is attracting attention as a future food industry. In recent years, the demand for fishery equipment of mechanization, automation, and unmanned was increased due to the environment affected by seafood processing, stricter regulations on safety, decline and aging of fishery worker. Ark shell (Scapharca subcrenata) was being produced in many steps in the production process. The process has been made such as collection-landing-washing-first sort (goods/non-goods)-transports-second sort (size). It was undergone first and second steps by delivering to the consumer. Here, the first step is to sort goods to collection and the second step is to sort by size. The fishery workers need ten people in first step and six people in second step. The workload of one hour per kg is 4,247 kg/h in first step and 2,213 kg/h in second step. In addition, the goods ratio by work process was 79% in first step and 98% in the second step. In this process, a lot of fishery worker and working time is needed. Therefore, this study developed elemental techniques for an automated size sorting system considering the working process problem, time and situation for washing and sorting of ark shell.

• Archives of Pharmacal Research
• /
• v.12 no.2
• /
• pp.119-124
• /
• 1989

Cotton xanthate, which was obtained by treating cotton with carbon disulfide in alkaline solution, was treated with the solution of polyvalent metal ions to produce cotton xanthate-metal chelates. This chelation reaction was readily and simply achieved, and antimicrobial agents with suitable structures could subsequently be coupled to the chelate with ease at moderate pH values and in aqueous solution. Metal ions used in present work include Cu(II), Zn(II) and Fe(III). Tetracycline, streptomycin, neomycin and pyrithion were used as antimicrobial/antifungal agents. Antibacterial activities were measured employing ditch plate method against G(+) Staphylococcus aureus, Streptococus faecalis, and G(-) Escherichia coli, Enterobacter aerogenes, and the fungus, Aspergillus niger. All the cotton xanthate-metal-antimicrobial agent chelates exhibited activities whereas the cotton xanthate-metal chelates themselves were inactive. Considering the extensive washing procedures and results from control experiments, possibility of the involvement of physical adsorption for the binding of drugs could be excluded.

• Journal of Sericultural and Entomological Science
• /
• v.26 no.2
• /
• pp.26-31
• /
• 1984

In general, acid dyes been used for silk dyeing, but acid dyed silk shows weakness in color fastess, To improve this defect, the silk dyed with Acid Mordant Blue 13 was treated with chromes salts solution. Some mechanical properties and dyeing behaviors of the chrome mordant with dyed silk fabric were tested in this work. The tensile strength of silk fabric treated with chrome salts solution was decreased as the duration of treatment was increased. The mean rate constant (K) of photo-degradation was 1.019, and 1.047 after treated with Cr (III) and Cr (Ⅵ), respectively, whereas it was 1.304 in untreatment. The washing fastness of silk fabric also was improved by treatment with mordant and it was 3rd-4th grade and 4th grade when silk was treated with Cr (III) and Cr (Ⅵ), respectively, while untreatment gave 1st grade. The colour of dyed silk fabric was 2.5RP.3/10, but it was 5PB.4/3 and 5PB. 4/4 when the silk fabric was treated with Cr (III) for two hours and with Cr (Ⅵ) for one hour at 90$^{\circ}C$, respectively.

• Korean Institute of Interior Design Journal
• /
• no.1
• /
• pp.52-55
• /
• 1992

The purpose of this study was to suggest the spatial structure among residential behaviors in relation to work space. To find the structure, Multi-Dimensional Scaling analysis was used. Respondents were 349 middle income housewives living in apartments in the area of Caopital region. Data were collected through the questinnaire survey. For the future residential interior design, following points were sugtested. A laundary space neess to be developed independently , being separated from both bathroom and kitchen/dining space. A new area which will give housewives some territoriality and also function as home office needs to be considered. A space configuration which satisfies the organic relationships among laundary behaviors such as washing dying, ironing and folding , needs to be systematically planned, with two adjoining separate zones of wet and dry utility . The present bathroom nees to be more incorporated to the private bedroom rather than to workspace.

• Korean Journal of Human Ecology
• /
• v.9 no.2
• /
• pp.5-20
• /
• 2006

This study was a preliminary investigation into improving the environmental and healthy quality of childcare centers. The purpose of this study was to determine the management condition on indoor environment and hygiene of childcare centers in Cheongju. Questionnaire survey was carried out from 11st to 26th of August 2004 by mail. Respondents were consisting of 55 teachers, an executive of each childcare center in Cheongju. From the survey results, there were some problems in 'empty period after remodeling work for preventing sick house syndrome', 'humidity controling', 'glare controling', 'indoor or outdoor noise controling', 'cleaning frequency of each room', 'washing method of toys', 'laundry frequency of rag doll and bedclothes'. So, we need to establish the regulations or give some educations and informations about indoor environment and hygiene to administrators of childcare centers.

• Journal of the Korean Home Economics Association
• /
• v.42 no.7
• /
• pp.33-53
• /
• 2004

The purpose of this study was to investigate women's indoor and outdoor everyday life including their housework, labor and leisure of the late Chosen period as expressed in paintings. Women's everyday life was classified into their indoor and outdoor life according to the custom of Naeoe, which had confined women's activities in the outdoors. This study analyzed 93 Paintings depicting the Due life of People. As a result, even though the Chosen period was a conservative society dominated by Confucian custom that confined women in the home, most women spent much of their time in the outdoors carrying water, washing clothes and doing farm work. Some common women participated in marketing household product, peddling and managing a drink shop. Especially, servant women such as Kineo, Muneo and Youneo labored in Public offices or Private Places. Consequently, this study suggests that the misconception should be corrected that traditional women's sex role had been confined exclusively in the home.